Beverage Air SPE27-12M-B-DS User Manual

Item No. Quantity
3779 Champion Blvd., Winston-Salem, NC 27105 1-888-845-9800 Fax# 1-336-245-6453 http://www.Beverage-Air.com
Commercial Refrigeration Equipment General Specification
3 Year Parts/Labor Warranty
Additional 2 Year Compressor Warranty
SPE ELITE SERIES — MEGA TOP, DUAL SIDED
Dual Sided Prep Table Cabinets are accessible from front and back. Fifty percent greater pan capacity than the all around standard prep table. Features enhanced refrigeration system and new and improved grille system for better airflow and less temperature gradient. Improved design provides better airflow management and uniform temperature distribution throughout the cabinet. Pans are cooled from the bottom, eliminating the necessity of air blanket. Airflow assures that product in open containers is kept below 41°F and above freezing. This translates into increased product shelf life, higher quality food, better food appear­ance, fresher product and a reduction of bacteria build-up to combat food-borne illnesses.
CABINET CONSTRUCTION
Exterior construction includes heavy-duty stainless steel finish on front, back, sides, top, and door(s). Removable hoods and insulated lid(s) assemblies are made of matching stainless steel.
Doors are mounted to face of cabinet on cartridge style hinges permit­ting them to self close. Hinges also allow doors to stay open 120°. A plug in type vinyl magnetic gasket is attached to each door for posi­tive seal. Door handles are made from extruded aluminum with a black anodized finish. They are contoured to permit easy opening of doors with fingers from both top and bottom of handle.
Cabinet insulation is CFC and HCFC-free foamed-in-place polyure­thane of two-inch minimum thickness. Six-inch casters, 2 with brakes, are standard. 3-inch casters and 6” legs are available as an option.
One (1) 10” deep and one (1) 12” deep, full length removable cutting boards constructed of high-density white polyethylene plastic are sup­plied with cabinet. These are readily removable for cleaning. Two epoxy-coated steel wire shelves per section are supplied as standard. Pans furnished are 4” deep and made of polycarbonate plastic.
REFRIGERATION
More robust refrigeration system provides added capacity and efficiency. Systems are designed using CFC and HCFC-free R134a refrigerant and capillary tube between condenser and evaporator. Recirculated, forced air from evaporator is moved under pans, which are recessed 2” from top of cabinet. Forced air over the condenser is drawn through grille under door as well as the back and bottom of cabi­net. Automatic condensate evaporator is provided to eliminate the need of floor drains.
FOOD PREPARATION SERIES PREP TABLES
ELITE SERIES MEGA TOP DUAL SIDED
Optional Overshelf
Assembly Available
SPE48-18M-DS
ELECTRICAL CONNECTION
Units pre-wired at factory and
include 8’ long cord and plug
MODELS: SPE27-12M-B-DS SPE48-18M-DS SPE60-24M-DS SPE72-30M-DS
Available From:
Model Specified Location
Store# Quantity
PLAN VIEWS
Food Preparation Table — Mega Top, Dual Sided
Models: SPE27-12M-B-DS, SPE48-18M-DS, SPE60-24M-DS, SPE72-30M-DS
MODEL SPE27-12M-B-DS SPE48-18M-DS SPE60-24M-DS SPE72-30M-DS
EXTERNAL DIMENSIONAL DATA
Length Overall (inches) Length Overall (mm)
Depth Overall (inches) Depth Overall (mm)
Height Overall— (inches) with lids open Height Overall— (mm) with lids open
Number of doors 1 2 2 3
Depth with Door Open 90 o 62 1/2” 62 1/2” 62 1/2” 62 1/2” Clear Door Opening (inches) 19 3/8” x 22” 19 3/8” x 22” 19 3/8” x 22” 19 3/8” x 22” INTERNAL DIMENSIONAL DATA NET Capacity (cubic ft.)
NET Capacity (Liters) Internal Length Overall (inches)
Internal Length Overall (mm) Internal Depth Overall (inches)
Internal Depth Overall (mm) Internal Height Overall—(inches)
Internal Height Overall—(mm) Number of shelves 2 4 4 6 Number of pans 12 1/6 size 6 1/6 size
ELECTRICAL DATA Full Load Amperes 115/60/ 1 4 5 9.6 9.6 REFRIGERATION DATA Horsepower 1/6 1/4 1/3 1/3 WEIGHT DATA Gross Weight (Crated lbs) 244 378 447 465 Gross Weight (Crated kg) 111 172 203 211
27” 686
48 1/2”
1232
46 1/2”
1181
7.3 207
23” 584
20” 508
18” 457
48”
1219
48 1/2”
1232
46 1/2”
1181
13.9 394
44”
1118
20” 508
18” 457
2 1/2 size 1 full size
60”
1524
48 1/2”
1232
46 1/2”
1181
17.1 484
56”
1422
20” 508
18” 457
12 1/6 size
2 1/2 size 1 full size
72”
1829
48 1/2”
1232
46 1/2”
1181
21.5 609
68”
1727
20” 508
18” 457
18 1/6 size
2 1/2 size 1 full size
COMMON END VIEWS
SPE27 FRONT VIEW
SPE48 FRONT VIEW
SPE60 FRONT VIEW
SPE72 FRONT VIEW
BEVERAGE-AIR® CORPORATION
3779 Champion Blvd. • Winston-Salem, NC 27105 USA • (336) 245-6400 • Fax (336) 245-6453 • (888) 845-9800 • www.beverage-air.com
Specifications are subject to change without prior notice. 06/13
Loading...