Best L3348D Specifications

HB0032

r details)

”

PIK SERIES
INSERT

Especially designed to be installed in custom hood
for use over residential commercial-style cooking
surfaces.

FEATURES

Cabinet mount _ custom application

•

Widths: 33’’, 45’’

•

Halogen lighting (33’’_ 2 x 50 watt; 45’’_ 3 x 50 watt GU10)

•

Lamps included

Slide controls: Lighting, on-off, infinite speed

•

Easily accessible, dishwasher-safe stainless steel

•

baffle filters

Heat Sentry™ turns blower ON to HIGH speed when

•

excess heat is detected

For indoor use only

•

OPTIONS

Custom hood liners (L33 or L45 Series):

•

Widths - 36’’, 42’’, 48’’, 54” and 60’’
Adjustable depth - see liner spec. sheet for details
Stainless Steel construction - protects custom hood base
and wipes clean easily

Ambient light panel (ALP Series) for L Series custom

•

hood liners (Halogen lighting: 36’’ and 42’’_ 2 x 50 watt;
48”, 54” and 60” _ 3 x 50 watt GU10) Lamps included

Backsplash (RMP Series):

•

Widths - 36”, 42”, 48”, 60”
Stainless Steel construction - protects back wall
and wipes clean easily

WCPI Remote control: With Stainless Steel faceplate,

•

to fit any décor.

INSERT SPECIFICATIONS

120 VAC, 60 Hz
Amps (without blower) 0.8 (PIK33), 1.3 (PIK45)

SPECIFICATION SHEET

HK0076A

Mount insert so bottom of custom hood is 24’’ to 30’’ above

cooking surface.

Custom Hood Liner

L33 or L45 Series

4”

Adjustable depth

(See liner spec

sheet fo

WCPI Remote Control

4 1/2''

HC0010

Fits custom hood nominal

width 36”, 42”, 48”, 54” or 60

6 3/8''

Ambient Light Panel

ALP Series

HA0027A

Backsplash

RMP Series

BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711

BEST Drummondville, QC Canada www.BestRangeHoods.com 866-737-7770

REFERENCE QTY. REMARKS Project

Location

Architect

Engineer

Contractor

Submitted by Date

01G 99044051D

PIK MOUNTING

Size of the cut-out

NOTE: If optional L series liner is used, refer to installation
instructions for size and location of the cut-out.

Suggested Custom Hood Internal Framework

3 1/2''

16 3/8''

17 1/16''

32 1/2'' or 44 1/2''

2 1/4'' min.

HD0093A

NOTE: The 3 1/2’’ notch must be cut only if the WCPI
optional wall control will be installed.

- PIK33 AND PIK45 INSERT SYSTEM -

INTERIOR BLOWERS

Model 647

(7” Round

wall cap)

Model 415

7” Round

adjustable elbow

(optional)

Model 407

(7” Round x 24’’

section)

7” Round

metal flexible

duct (optional)

Model 412

transition

(3¼” x 10” to 7”)

Adapter and damper 3¼’’ x 10’’

(supplied with P5 and P8 blowers)

Model 634 or 644

(roof cap)

Model 413

transition

(3¼” x 10” to 8”)

1 1/2”

HH0040A

8” Round
adjustable elbow
(optional)

8” Round
standard
duct

8” Round
metal flexible duct
(optional)

Model 459

transition

(3¼” x 14” to 8”)

Adapter and damper 3¼’’ x 14’’

(supplied with P8 blower)

Model 643

(8” Round

wall cap)

(supplied with

ALP36, ALP42,

ALP48, ALP54 or ALP60

Ambient light panel (optional)

(supplied with P5 and P8 blowers)

WCPI

Wall control

(Optional)

RMP Series Backsplash

HL0065

Flow deviator

P5 and P8 blowers)

Rough-in kit

Model P5

single-blower

(500 cfm)

(Stainless Steel wall

covering with warming

shelves. Optional)

- 3 -

L3336S, L3342S, L4548S
L4554S or L4560S
Custom Hood Liner (optional)

PIK33 OR PIK45
INSERT

Model P8

NOTE: The dual blower P8 must be

dual-blower (900 cfm)

installed with 8’’ round duct. If it
is impossible to connect the dual
blower P8 to a 8’’ round duct,
use a 7’’ round duct. In that
case, the blower performance
will be decreased by 25%.