Bertazzoni MAST30WDEX Specifications

MAST30WDEX

MASTER SERIES
30" WARMING DRAWER

PRODUCT FEATURES

Oven type
Oven Volume
Temperature range
Cavity finishing

Warming drawer

2.3 cu.ft.
85 - 170° F
Tempered glass bottom

TECHNICAL SPECIFICATIONS

Electrical supply

Power connection
Certification
Warranty

Packaging dimensions and
weight

120 V 60 HZ - 550 W
5 Amps

NEMA 5-15P with 59'' power cord
CETLUS
2 years parts & labor
W 26 3/8''

H 13 1/2''
D 32 3/4''

87.3 lbs

Bring Italian design and precision into your kitchen with
the Bertazzoni warming drawer, engineered to install
proud or flush in any type of kitchen cabinet.

Keep food warm before or during the meal with the
lateral convection system and variable temperature
control up to 170F.

Pre-heat dishes and serving bowls to better enjoy food
when served.

Load heavy items from the sides without lifting thanks to
the open sides drawer construction.

Generate even heat across the entire surface with the
tempered glass bottom finishing.

Designed with pride by Bertazzoni in Italy.
Industry leading 2 years parts and labor warranty.

bertazzoni.comversion: 3

MAST30WDEX

PRODUCT DIMENSIONS

INSTALLATION
REQUIREMENTS

See BERTAZZONI DESIGN GUIDE

SIDE VIEW

FRONT VIEW TOP VIEW

ELECTRICAL CONNECTION

INSTALLATION OPTIONS

This product is designed to be installed
in combination with other Bertazzoni
ovens.
No support shelf needed in case an
oven is installed above the drawer.
See several installation options shown
in the BERTAZZONI DESIGN GUIDE.

For single ovens installed into a wall
cabinet, the electrical junction box may
be located above, below to the left or
right of the unit within reach of the
power cord.
Placement within the opening may
require additional cabinet depth.

FRONT VIEW

SIDE VIEW FRONT VIEW

TOP VIEW

1"

26

29 7/8"

758

19 1/8"

487

21 1/2"

547

5/8"

15

9 7/8"

251

28 1/8"

713

21"

532

POWER CORD
OUTPUT

E

E

5"

127

4"

102

3 3/8"

86

9 5/8"

246

22"
558

28 1/2"

724

30 1/2"

774

FLUSH INSET

WIDTH

3/4"

19

10 1/8"

256

1"
25

1"

25

23 3/4"

604

FLUSH INSET

DEPTH

MASTER SERIES
30" WARMING DRAWER

For installation of multiple products in combination, refer to the Design Guide at us.bertazzoni.com or ca.bertazzoni.com

Disclaimer: while every effort has been made to ensure the accuracy of the information contained in this document, Fratelli Bertazzoni reserves the right to change it at any time without notice.

For detailed installation instructions, consult the installation manual. Fratelli Bertazzoni, Bertazzoni and the winged wheel brand icon are registered trademarks of Bertazzoni Spa.

bertazzoni.comversion: 3