Bernafon FU2SP Users Guide

FUSION 2 SP Radio Model (seen from the top side)

FUSION 2 SP Radio Model (seen from the bottom)

RF Engine

Block

Antenna

Motherboard

Battery -

Battery +

Program flex I/O

Speaker unit connectors

Mic flex

Bernafon Radio Model - Quick Installation Guide

Bernafon Model Name: FUSION 2 SP

The FUSION 2 SP radio model is a low power, inductive radio transceiver working at 3.84 MHz consisting of an RF Engine Block (incl. DSP, radio & memory),
antenna coil, motherboard (incl. small passive components) and intended to be installed as a module into Bernafon wireless hearing aid devices only. The module
also has all voltage regulators included inside the engine block. The module requires a battery, one or two microphones on a flex PCB and a speaker to be attached
and must be mounted in an external plastic shell. It is possible for authorized personnel only to program the module through a flex I/O. The module is d epicted
below:

1

FUSION 2 SP Radio Model (seen f rom the side)

Bernafon Radio Model - Quick Installation Guide
Radio Model Name: FUSION 2 SP

FCC ID: U6XFU2SP IC: 7031A-FU2SP

2