Berkel X13AE User Manual
Model X13AE
Features
Berkel model X13AE automatic gravity feed slicer offers
a number of special features. A sanitary one piece
engineered polymer base and product table reduces
seams and joints while providing an NSF approved surface
for easy, effective cleaning. A removable and submersible
table mounted sharpener with borazon stones for accurate
sharpening. Precise thickness control is achieved using
a variable pitch barrel cam for ne adjustment and wafer
thin slices. The index knob and operating controls are
mounted outside of the drip zone for quick and easy
access. The slicer can be automatically operated in three
speeds, and with three different stroke lengths. A permanent ring guard protects the entire non-slicing portion of
the knife during slicing and cleaning. A fence is included
with the product table. An easy to use kick stand supports
the slicer for easy access to clean under the slicer.
Item # _________________________________________
Model X13AE
Automatic Gravity Feed Slicer
❑ X13AE Automatic Gravity Feed Slicer
Standard Features
➤ 1-speed, 1/2 HP, permanently lubricated ball bearing
knife motor with thermal protection
➤ Automatic operation in three speeds: 20, 40 or 60
slices/minute
➤ Three stroke lengths: 1/3, 2/3 and full stroke
➤ Furnished in 120/60/1, 8 amps, AC, with 3 wire cord
and plug (see below for optional voltages)
➤ One-piece NSF approved polymer base and product
table for reduced seams, accessibility and easy
cleaning
➤ Index knob conveniently located outside the drip zone
in the upper left to provide quick and easy access
➤ Variable pitch barrel cam for ultra ne, precise slice
adjustment to a thickness of 1
➤ 13" (330 mm) diameter, hollow ground, hardened and
polished forged stainless steel knife
➤ Large product table with extra capacity:
– Rectangles up to 10
– Squares up to 7
– Rounds up to 8
➤ Articulating and full length rear mounted meat pusher
to secure and advance products evenly, fence to hold
product during automatic operation
➤ Ergonomic, multi-grip handle to advance product table
➤ Submersible, removable product table mounted
sharpener for consistent sharpening and easy cleaning
➤ Borazon sharpening stones for fast, accurate
sharpening and extended life
➤ No-volt release requires restarting the slicer after a
power interruption
➤ Permanent ring guard protects entire non-slicing
portion of the knife
➤ LED indicates power to the slicer
➤ Sealed start /stop switches conveniently located on the
index knob housing out of the food zone
➤ An easy to use kick stand for easy cleaning under the
slicer
1
1
⁄2" (190 mm)
1
⁄2" (220 mm) diameter
5
⁄16" (34 mm)
⁄2" x 63⁄4" (265 mm x 170 mm)
Automatic Gravity Feed Slicer Model X13AE
Power Options
❑ 1/2 HP, 220/50/1, 3.5 amps, AC, not submitted for
ETL Listing
❑ 1/2 HP, 220/60/1, 3.5 amps, AC, not submitted for
ETL Listing
Accessories
Approved By:
Date
Berkel Company • 2006 Northwestern Parkway • PO Box 696 • Louisville, KY 40201
800-348-0251 • FAX 888-888-2838 • www.berkel.com
Form BK45709 (03-09)
❑ Vegetable Chute with Pusher
❑ Skewers with Coring Tool
❑ Slaw Tray
Model X13AE
Automatic Gravity Feed Slicer
Model
No.
Rect. 101⁄2" x 63⁄4" (265 x 170 mm)
X13AE
Motor Electrical Weight
1-speed
1/2 HP
Cutting Capacity
Square 7
Round 8
1
⁄2" (190 mm)
1
⁄2" (220 mm)
120/60/1
8 amps
Net 96 lb. (43 kg)
Ship 126 lb. (57 kg)
Slice
Thickness
5
⁄16"
1
(34 mm)
Knife
Diameter
13"
(330 mm)
Width Depth Height
31"
(787 mm)
Width A Depth B Height C
(710 mm)
Product Dimensions
28"
(735 mm)
Box Dimensions
31"
(787 mm)
29"
25"
(635 mm)
31"
(787 mm)
Specifi cations
Motor: Knife motor is 1-speed, 1/2 HP totally enclosed
and permanently lubricated ball bearings, thermally
protected. Table motor is brushless DC providing three
xed speeds, 20, 40 or 60 slices per minute. Three stroke
lengths in the automatic mode, provide more slices/
minute at the same speed.
Electrical: Furnished in 120/60/1, 8 amps, AC, ETL
Listed, with 3-wire cord and plug. Power options noted on
page 1.
Finish/Construction: Base, product table, pusher, support
arm and upper housing are constructed of NSF approved,
engineered polymers reducing the number of seams.
Gauge plate and center plate are anodized aluminum.
All controls are sealed and located out of the drip zone.
Knife: 13" (330 mm) diameter, hollow ground, hardened
and polished stainless steel.
Automatic Gravity Feed Slicer Model X13AE
Knife Sharpener: Removable and submersible table
mounted, two stone, dual action design to ensure correct
pressure and contact angle are always applied, thus
reducing knife wear and delivering a perfect edge. Borazon
stones last longer, sharpen faster and clean easier.
Thickness Control: Index knob controls a precision,
variable pitch barrel cam with ultra- ne adjustment in the
As we continually strive to improve our products, speci cations are necessarily subject to change without notice.
rst revolution and opens to a thickness of 1
for accurate and consistent slicing. This control is located
out of the drip zone on the upper left to provide quick and
easy access for operation and cleaning.
Cutting Capacity: Shown in chart above.
Product Table: Full gravity feed 45° angle with articulating
rear mounted pusher that runs the entire length of
the table to secure product for increased yield and
consistency in every slice. A fence provides stability for
the product in automatic mode.
Kick Stand: An easy to use kick stand supports the slicer
for easy access to clean under the slicer.
No-volt Release: Requires restarting the slicer in the
event of a power interruption.
Knife Ring Guard: Permanent tapered guard covers the
non-slicing portion of the knife edge.
Controls: Sealed push-button switches located on the
index knob housing out of the drip zone.
Warranty: Parts, labor and travel coverage for one year,
exclusive of wear items.
5
⁄16" (34 mm)
Berkel Company • 2006 Northwestern Parkway • PO Box 696 • Louisville, KY 40201
800-348-0251 • FAX 888-888-2838 • www.berkel.com
Form BK45709 (03-09)
Loading...