Berkel P15 User Manual

User Manual for model

P15 Series

Date 12-

User Manual

-07 UM – CodeF2 - Rev. 0.1

P15 Series

12-12

User Manual

07 UM – CodeF2 - Rev. 0.1

1. INTRODUCTION

1.1.Purpose of the manual

................................

1.2.Keeping the manual

................................

1.3.Use of the machine

................................

2. GENERAL INFORMATION

2.1.

Machine limits, general safety regulations

2.2.Guarantee and manufacturer’s responsibility

2.3.User’s obligations

................................

2.4.Plates

................................

3. TECHNICAL CHARACTERISTICS

3.1.Overall size

................................

3.2.Main technical data

................................

3.3.Products that can be sliced

................................

3.4.Products that cannot be sliced

................................

4. DESCRIPTION

4.1.Unpacking

................................

4.2.Main components

................................

4.3.General description

................................

5. INSTALLATION

5.1.Installing the machine

................................

5.2.Command description

................................

6. USING THE SLICING MACHINE

6.1.Loading the goods

................................

6.2.Cutting the goods

................................

6.3.Cleaning the slicing machine

................................

7. MAINTENANCE AND REPAIRS

7.1.General information

................................

7.2.Sharpening the blade

................................

7.3.Lubricating the guide bars and overplay

................................

8. DISMANTLING THE SLICING MACHINE

The manual is made progressively numbered pages.

The contents are divided into progressively numbered paragraphs, if in any doubt about the contents and for any

further explanation contact the manufacturer or the authorised technical assistance, stating the paragraph

number of the pertinent subject.

P15 Series

LIST OF CONTENTS

................................................................

................................

................................................................

................................

................................................................

................................

................................................................

................................

................................................................

................................

................................................................

................................

................................................................

................................

................................................................

................................

................................................................

................................

................................................................

................................

................................................................

................................

................................................................

................................

................................................................

................................

12-12

User Manual

Pag.

.. 4

......4

.......4

.. 5

.......... 6

............................6

.................. 7

.......7

............................ 8

....................... 8

....................8

........ 11

..... 12

..13 .. 13

...... 14

........ 14

........................15

.....16

.. 16

........17

.......18

07 UM – CodeF2 - Rev. 0.1

1. INTRODUCTION

1.1 PURPOSE OF THE MANUAL

This publication contains all the information necessary for

the installation, use and maintenance of the manual

flywheel slicing machines to be used for food, with circular

blade, model P15.

The purpose of this manual is to allow the user, above all

the direct user

, to take every precaution and arrange all

human and material means necessary for a safe and

lengthy use of these machines.

1.2 KEEPING THE MANUAL

This manual must be given to the person who w

maintain the machines and this person will keep the

manual in a safe and dry place, ready to be used.

recommend that a copy be kept on file.

For any correspondence with the manufacturer or

authorized

personnel, please refer to the informatio

the plate and the machine serial number.

The manual must be kept for the entire life of the machine

and in case of need (ex. any damage to even a part of the

manual that makes consulting it difficult) the user must

acquire a new copy exclusively from

the manufacturer.

The user must let the manufacturer know the address of any

new owner of the machine.

1.3 USE OF THE MACHINE

The use and configurations of the machine are the only

ones allowed by the manufacturer; do not try to use the

machine differently from the indications.

The machines are to be used for cutting only food products of

the type and size indicated in the follo

wing paragraphs.

The manufacturer declines all responsibility derived from an

improper use or use by personnel who has not read and fully

understood the contents of this manual; changes and/or repairs

carried out on one’s own; the use of spare parts that

original or not specific for the type of machine.

P15 Series

For any explanation or doubts on the contents of this

manual,

please contact immediately the manufacturer

or an authorised technical assistance service and quote

the paragraph number of the required subject.

ill use and

n on

are not

2. GENERAL INFORMATION

2.1 MACHINE LIMITS, SAFETY REGULATIONS

The machine has been designed and made to slice

food products of the type and size as indicated in

paragraphs 3.2, 3.3 and 3.4.

Environmental conditions for using the machine

The operating environment must have the

following characteristics:

Temperature.................................. from

Relative humidity .......................................... max. 95%

he machine cannot be used in open areas

and/or exposed

to atmospheric agents and in places with fumes,

smoke or corrosive and/or abrasive dust, with the risk

of fire or explosion and in any case where the use of

antideflagrating components are prescribed.

General safety regulations

The slicing machine must be used only by personnel

who has carefully read the contents of this manual.

The operators must be over 18 years of age, in

perfect mental and physical conditions, have the right

attitude and capaci

ty (with the necessary knowledge for

maneuvering

and normal maintenance of simple

mechanical and electrical components).

User Manual

-5°C to +40 °C

-12-07 UM – CodeF2 - Rev. 0.1

For a safe use of the machine follow the instructions below

- Install

the machine according to the instructions in

the paragraph “Installation”;

- Install

the machine so that it is far from people who

must not use it, especially children;

- Do not

be distracted while using the machine;

- Do not

wear loose clothing or open sleeves, if

necessary use headgear to keep hair out of the way;

- Do not

let anyone come close to the machine while

in use;

- Do not

remove, cover or change the plates that are

on the machine and, if they are damaged, replace

them immediately;

- Do not

remove the protective devices and do not

change or exclude the mechan

ical protective devices;

- Only

slice permitted products; do not try to slice

any products that are not allowed;

- The area

around the machine, where the food is laid

and the floor where the operator works must always

be kept clean and dry;

- Do not

use the machine as a support surface and do

not place any object on it that does not pertain to

normal cutting operations;

- Immediately

stop the machine and call the technical

assistance service in the case of anomalous

function, suspect of brea

kages, incorrect

movements, unusual noises, etc.;

- Always

use gloves that are resistant to cutting and

tearing for the cleaning and maintenance operations;

- The goods

to be cut are to be placed on and removed

from the sliding overplate only when the plate is

completely retracted (far from the blade) and the

carriage all the way towards the operator;

- No

cutting accessories are allowed unless supplied

by the manufacturer;

- For

any extraordinary intervention (belt replacement,

blade replacement, etc.) please contact the

manufacturer or authorized

assistance personnel.

P15 Series

2.2 GUARANTEE AND

MANUFACTURER’S RESPONSIBILITY

The guarantee of a good function

conformity of the machines, that are to be used

accordingly, depends on the correct application

of the instructions contained in this manual.

The manufacturer declines all direct and

indirect responsibility deriving from:

- Not following

the instructions in the manual;

Persons using the machine who have not read

and understood the contents of this manual;

Using the machine so that it does not conform

to specific regulations in force in the country

of installation;

- Unauthorized

changes and/or repairs to the

machine;

The use of accessories that are not supplied

by the manufacturer and spare parts that are

not original;

- Outstanding events.

If the machine is sold or given away, this

automatically means that the manufacturer is

no longer responsible unless the relative

manual accompanies it.

If the machine is transferred to another user in a

country with another community language it is the

irst user’s responsibility to supply a correctly

translated copy of this manual in the language of

the country where the machine will be used.

In the case of transfer of the machine the first user

must let the manufacturer know the address of the

new user

so that he can be reached for any

indispensable communications.

The original text of this manual, in the Italian

language, it to be considered the sole reference for

resolving any interpretative controversy pertaining

to translations into community langu

User Manual

and a complete

ages.

-12-07 UM – CodeF2 - Rev. 0.1

2.3 THE USER’S OBLIGATIONS

The user must scrupulously observe the instructions in

this manual for the manufacturer’s guarantee to be

valid and particularly:

Always respect the limits of the machine;

Always carry out a constant and diligent maintenance;

Make sure the persons using the machine are

qualified and able to do so, including the fact that they

must have read this manual.

P15 Series

2.4 PLATES

The following plate is installed on the machine:

manufacturer’s identification plate, machine plate,

techn

ical data plate; placed on the base, as

shown in the figure

User Manual

-12-07 UM – CodeF2 - Rev. 0.1

+ 12 hidden pages

Berkel P15 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual