Berkel ML-134462, ML-134463, ML-134476, ML-134477, ML-141002 Owner's/operator's Manual

Model FMS30
Model FMS40

ML-134462
ML-134463
ML-134476
ML-134477
ML-141002

OWNER/OPERATOR
MANUAL

Berkel Company
PO Box 696
2006 Northwestern Parkway
Louisville, Kentucky 40201
1-800-348-0251
Fax [phone]

F37236 Rev. C (February 2011)

TABLE OF CONTENTS

GENERAL .......................................................................................................................... 3

INSTALLATION .................................................................................................................. 3

Unpacking .................................................................................................................... 3

Location .......................................................................................................................3

ELECTRICAL CONNECTIONS ......................................................................................... 4

OPERATION ...................................................................................................................... 5

Controls ........................................................................................................................ 6

Non-Timed Mixing ........................................................................................................ 6

MIXING ...............................................................................................................................7

Bowl ............................................................................................................................. 7

Agitator ......................................................................................................................... 7

Attachments ................................................................................................................. 7

Bowl Guard/Wire Cage ................................................................................................ 8

Remove Bowl Guard/Wire Cage .................................................................................. 8

Install Bowl Guard/Wire Cage ...................................................................................... 8

CLEANING ......................................................................................................................... 8

MIXING BOWL CAPACITY CHART .................................................................................. 9

Agitators and Accessories .......................................................................................... 10

MAINTENANCE ............................................................................................................... 10

Motor ..........................................................................................................................10

Bowl Lift Slideways .................................................................................................... 10

SERVICE .......................................................................................................................... 11

WARRANTY ..................................................................................................................... 12

FMS30 & FMS40 Owner/Operator Manual

– 2 –

© Berkel, 2010

Installation, Operation, and Care of

BERKEL FMS30 & FMS40 Quart MIXER

SAVE THESE INSTRUCTIONS

GENERAL

The 30 quart mixer has an AC Induction electric motor and motor control. A 30 quart bowl, B-Flat beater,
spiral dough hook, D wire whip and ingredient chute are shipped as standard equipment. A 0 - 15 minute
timer and four plastic foot pads are standard. A #12 attachment hub is standard. A variety of attachments
are available. A 20 quart bowl and it's associated accessories are optional.

The 40 quart mixer has an AC induction electric motor and motor control. A 40 quart bowl, bowl guard,
B-fl at beater, spiral dough hook, D wire whip and ingredient chute are shipped as standard equipment. A
0 - 15 minute timer and four plastic foot pads are standard. A #12 attachment hub is standard. A variety
of attachments are available. A 20 quart bowl and its associated accessories are optional.

INSTALLATION

UNPACKING

Immediately after unpacking the mixer, check for possible shipping damage. If the mixer is found to be
damaged, save the packaging material and contact the carrier within 15 days of delivery.

Prior to installation, test the electrical service to assure that it agrees with the specifi cations on the machine
data plate.

LOCATION

Remove hex head shipping bolts with an open end wrench (or crescent wrench), that attaches the four
legs to the base-frame of the carton.

Place the mixer on a suitable sturdy level surface. There should be adequate space around the mixer for
the user to operate the controls and install and remove bowls.

FMS30 & FMS40 Owner/Operator Manual

– 3 –

ELECTRICAL CONNECTIONS

ELECTRICAL CONNECTIONS (CORD CONNECTED MIXERS)

Single-Phase Mixer

The electrical cord on this machine is equipped with a three-pronged grounding
plug which must be connected to a properly grounded receptacle. If the receptacle is not the
proper grounding type, contact an electrician. Do not remove the grounding prong from the
plug.

ELECTRICAL CONNECTIONS (NON-CORD CONNECTED MIXERS)

Electrical and grounding connections must comply with the applicable portion of
the National Electrical Code and/or other Local Electrical Codes.

Disconnect the electrical power to the machine and follow lockout / tagout
procedures.

Three-Phase Mixer

A hole for the 3/4 "-trade-size conduit is located in the rear of the pedestal. Make electrical connections
per the wiring diagram located on the inside of the top cover.

• Remove side cover.

• Connect fi eld supply lead wires L1, L2, and L3 to supply harness wires labeled "SERVL1",
"SERVL2", and "SERVL3" respectively.

• Connect ground wire to supply harness green wire.

• Reinstall side cover.

FMS30 & FMS40 Owner/Operator Manual

– 4 –