Berkel FMS10, ML-141040, ML-141018, ML-134327, ML-141057 User Manual

Model FMS10
Model FMS20

ML-141018
ML-141040
ML-141057
ML-134327

OWNER/OPERATOR
MANUAL

Berkel Company
PO Box 696
2006 Northwestern Parkway
Louisville, Kentucky 40201
1-800-348-0251
Fax [phone]

F37271 Rev. A (February 2011)

TABLE OF CONTENTS

GENERAL.........................................................................................................................3

INSTALLATION.................................................................................................................3

Unpacking...................................................................................................................3

Location......................................................................................................................3

Electrical Connections................................................................................................3

OPERATION.....................................................................................................................4

Controls.........................................................................................................................5

Non-Timed Mixing....................................................................................................... 5

MIXING.............................................................................................................................6

Bowl............................................................................................................................6

Agitator........................................................................................................................6

Wire Cage...................................................................................................................7

Remove Wire Cage/Bowl Guard.................................................................................7

Install Wire Cage/Bowl Guar.......................................................................................7

CLEANING........................................................................................................................7

MIXING BOWL CAPACITY CHART.................................................................................8

Agitators and Accessories...........................................................................................9

MAINTENANCE................................................................................................................9

Motor...........................................................................................................................9

Bowl Lift Slideways.....................................................................................................9

SERVICE.........................................................................................................................10

WARRANTY....................................................................................................................11

NOTES............................................................................................................................12

FMS10 & FMS20 Owner/Operator Manual

– 2 –

© Berkel, 2010

Installation, Operation, and Care of

BERKEL FMS10 & 20 Quart MIXER

SAVE THESE INSTRUCTIONS

GENERAL

The 10 quart mixer has a DC electric motor and motor control. A 10 quart bowl, bowl guard, B-Flat beater,
spiral dough hook, D wire whip and ingredient chute are shipped as standard equipment. A 0-15 minute
timer and four plastic foot pads are standard.

The 20 quart mixer has a DC electric motor and motor control. A 20 quart bowl, bowl guard, B-fl at beater,
spiral dough hook, D wire whip and ingredient chute are ship ped as sta ndar d equi p ment . A 0 - 15 m inute
timer and four plastic foot pads are standard. A #12 attachment hub is standard. A variety of attachments
are available. A 10 quart bowl and its associated accessories are optional.

INSTALLATION

UNPACKING

Immediately after unpacking the mixer, check for possible shipping damage. If the mixer is found to be
damaged, save the packaging material and contact the carrier within 15 days of delivery.

Prior to installation, test the electrical service to assure that it agrees with the specifi cations on the machine
data plate.

LOCATION

Remove hex head shipping bolts with a 3/8" wrench (or crescent wrench), that attaches the four legs to
the base-frame of the carton.

Place the mixer on a suitable sturdy level surface. There should be adequate space around the mixer for
the user to operate the controls and install and remove bowls.

ELECTRICAL CONNECTIONS (Cord Connected Mixers)

The electrical cord on this machine is equipped with a three-pronged grounding
plug which must be connected to a properly grounded receptacle. If the receptacle is not the
proper grounding type, contact an electrician. Do not remove the grounding prong from the
plug.

FMS10 & FMS20 Owner/Operator Manual

– 3 –

Moving beater in bowl. Keep hands, clothing, and utensils out while in operation.
Do not use without interlocked guard.

Bowl Guard
Wire Cage

Agitator

OPERATION

Controls

Bowl Guard
Splash Guard

Bowl Lift
Handle

Fig. 1

Bowl
Support

Attachment Hub
Thumb Screw
and Plug

Fig. 1A (20 Quart Mixer)

FMS10 & FMS20 Owner/Operator Manual

– 4 –