Berkel 919E User Manual
Model 919E
C
Safety and Convenience Features
Berkel Model 919E automatic gravity feed slicer features
Berkel’ s time pr oven hollow ground stainless steel knife,
built-in, dual-action sharpener and a number of safety
features. The tapered permanent guard covers the nonslicing portion of the knife even when the sharpener and
center plate are removed. The unit is easy to clean and
disassembles quickly without tools.
Accessories
❏ Stainless steel vegetable ❑ 4” Extension NSF
chute with pusher legs (set of 4)
❏ Skewers with coring tool ❏ Slaw tray
❏ Sharpening kit ❏ Juice cup
❏ Receiving tray ❑ Product fence
Item #
Model 919E
Automatic Gravity Feed Slicer
Standard Features
➤ 1-speed, 1/2 HP, totally enclosed and permanently
lubricated knife motor
➤ 1-speed, automatic carriage produces 50 slices per
minute
➤ Furnished in 115/60/1, 4.5 amp, AC, ETL listed;
also available in 1/3 HP, 220/60/1, 2.4 amp, AC,
ETL Listed
➤ Low 12/5 VDC voltage for added operator protection
➤ Finish is stainless steel and sanitary burnished
aluminum; unit disassembles quickly without tools
for easy cleaning
➤ Nominal 12-1/2” (318 mm) diameter, hollow ground,
hardened and polished forged stainless steel knife
➤ The carriage handles food up to 11” (280 mm) wide,
by 6” (152 mm) high or 8” (203 mm) diameter
➤ Rear-mounted, stainless steel meat pusher extends
over the length of the product table
➤ Precise slice adjustment to a thickness of
27/32” (21 mm)
➤ Ergonomic style handle for ease of use
➤ Built-in, top-mounted, two stone knife sharpener
with single lever , dual-action system
➤ Permanent, tapered knife ring guard covers non-
slicing portion of knife even when the sharpener
and center plate are removed
➤ Q-P-Q nickel plated transport slide rod with reservoir
wick for reduced wear
➤ On/off, 3-position, moisture protected switch with
power light
➤ Attached 6-foot, flexible, 3-wire cord and plug for
grounded receptacle
➤ No-Volt release prevents activation of the slicer in
the event of a power interruption; operator must
restart the slicer
Automatic Gravity Feed Slicer Model 919E
Options
1/3 HP, 220/60/1, 2.4 amp, AC, ETL listed
❏
Approved By:
Date
Berkel Company • 4406 Technology Drive • South Bend, IN 46628-9700
574-232-8222 • 800-348-0251 • FAX 888-888-2838 • www.berkel.com
Form #SPC07-0902N
Model No. Cutting Slice Knife Slicing Product Dimensions
Capacity Thickness Diameter Speed Width A Depth B Height C
919E 11” (280 mm) wide to 27/32” 12-1/2” 50 SPM 20” 29” 24”
6” (152 mm) high (21 mm) (318 mm) (508 mm) (737 mm) (610 mm)
8” (203 mm) dia.
Motor Electrical Weight Box Dimensions
1-speed 115/60/1 Net 114 lbs. (52 kg) 32” 30” 30”
1/2 HP Ship 152 lbs. (69 kg) (813 mm) (762 mm) (762 mm)
Specifications
Motor: 1-speed, 1/2 HP, totally enclosed, permanently lubricated ball bearings, thermally protected.
Carriage: 1-speed, automatic carriage produces 50
slices per minute.
Electrical: Furnished in 115/60/1, 4.5 amp, AC,
ETL listed. Also available in 1/3 HP, 220/60/1, 2.4
amp, AC, ETL Listed. Low 12/5 VDC circuitry for
added operator protection.
Finish/construction: All food contact areas are
stainless steel including the pusher , gauge plate,
product table, center plate and knife; sanitary
burnished aluminum ring guard and one-piece base
with non-slip feet. Slicer disassembles quickly
without tools for easy cleaning.
Knife: Nominal 12-1/2” (318 mm) diameter ,
hollow ground, hardened and polished forged
stainless steel.
Cutting Capacity: Carriage handles food up to 11”
(280 mm) wide by 6” (152 mm) high or 8” (203
mm) diameter.
Slice Thickness: Precision gear system with
eccentric gear to prevent backlash, provides infinite
slice adjustment and consistent cuts of hard or soft
foods from tissue thin to 27/32” (21 mm).
Full Gravity Feed: Full 45° angle feed requires
Automatic Gravity Feed Slicer Model 919E
less mechanical pressure. Equipped with a rearmounted, stainless steel meat pusher that runs
the entire length of the product table to hold
product and minimize waste. An optional screw-in
weight is also available. Ergonomic style handle
for ease of use.
Knife Sharpener: Built-in, top-mounted, two
stone, single lever, dual-action system for a
lasting, razor-sharp edge. Unit is removable and
submersible for easy cleaning.
Model 919E
Automatic Gravity Feed Slicer
Width Depth Height
A
C
Knife Ring Guard: Permanent, tapered knife guard
covers non-slicing portion of knife edge even when
the sharpener and center plate are removed.
No-V olt Release: Prevents activation of the slicer in
the event of a power interruption; operator must
restart the slicer .
On/Off Switch: Highly reliable, moisture resistant,
on/off switch and power light.
Q-P-Q Nickel Plated Transport Slide Rod with
Reservoir Wick: E-nickel plated rod undergoes Q-P-Q
impregnation increasing the lubricity of the stainless
steel reducing wear properties of the rod & bushings.
Cord and Plug: Attached 6-foot, flexible, 3-wire cord
and plug for grounded receptacle.
Warranty: All parts, service and travel coverage for
one year , excluding wear items.
As we continually strive to improve our products, specifications
are necessarily subject to change without notice.
B
Berkel Company • 4406 Technology Drive • South Bend, IN 46628-9700
574-232-8222 • 800-348-0251 • FAX 888-888-2838 • www.berkel.com
Form #SPC07-0902N Made in the U.S.A. © 2002 Berkel Company Litho in U.S.A.
Loading...