Benq DC E520PLUS User Manual
DC E520+ Digital Camera
User’s Manual
Welcome
Copyright
Copyright 2005 by BenQ Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness
for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication
and to make changes from time to time in the contents hereof without obligation of this company
to notify any person of such revision or changes.
Taking care of your camera
• Do not use your camera in the following environmental range: temperature below 0°C or above
40°C.
• Do not use or store your camera in the environments listed below:
– Direct sunlight
– High and dusty places
– Next to an air conditioner, electric heater or other heat sources
– In a closed car that is in direct sunlight
– Unstable locations
• If your camera becomes wet, wipe it with a dry cloth as soon as possible.
• Salt or seawater may cause severe camera damage.
• Do not use solvents, such as alcohol, to clean your camera.
• If the lens is dirty, use a lens brush or soft cloth to clean the lens. Do not touch the lens with your
fingers.
• To prevent electric shock, do not attempt to disassemble or repair your camera by yourself.
• Water may cause a fire or electric shock. Therefore, store your camera in a dry place.
• Do not use your camera outdoors when it is raining or snowing.
• Do not use your camera in or near water.
• If a foreign substance or water gets in your camera, please turn the power off immediately and disconnect the batteries and the power adapter. Remove the foreign substance or water, and send it
to the maintenance center.
• Transfer the data to the computer as soon as possible to avoid losing your images and/or video
clips.
Disposal of Waste Electrical and Electronic Equipment by users in private households in the European Union.
This symbol on the product or on the packaging indicates that this can not be disposed of as household waste. You must dispose of your waste equipment by handing it over to the applicable take-back scheme for the recycling of electrical and
electronic equipment. For more information about recycling of this equipment,
please contact your city office, the shop where you purchased the equipment or
your household waste disposal service. The recycling of materials will help to conserve natural resources and ensure that it is recycled in a manner that protects
human health and environment.
BenQ DC 5530 User’s Manual
Table of Contents
1. TOURING YOUR DC E520+................................................... 1
1.1 Checking the Package Contents ...................................... 1
1.2 DC E520+ Components ................................................. 1
1.2.1 Front View........................................................... 1
1.2.2 Rear View ............................................................ 2
1.2.3 LED Indicators ..................................................... 2
2. P
REPARING YOUR DC E520+ FOR USE ................................. 3
2.1 Installing the Battery ...................................................... 3
2.2 Charging the Battery....................................................... 3
2.3 Inserting and Removing an SD Memory Card ................. 4
2.4 Setting the Date and Time .............................................. 4
SING THE DC E520+........................................................... 5
3. U
3.1 Snapshot Mode .............................................................. 5
3.1.1 Getting started with capturing images....................... 5
3.1.2 Snapshot Mode LCD Monitor Information ............... 6
3.1.3 Changing Camera Settings...................................... 7
3.1.4 Setting Shooting Mode .......................................... 7
3.1.5 Using the Flash..................................................... 8
3.1.6 Using the Self-timer .............................................. 9
3.1.7 Using the Burst..................................................... 9
3.1.8 Using the Optical Zoom......................................... 9
3.1.9 Using the Digital Zoom........................................ 10
3.1.10 Changing the Focus............................................. 10
3.1.11 Adjusting the EV................................................. 10
3.1.12 Snapshot Mode Menu Settings .............................. 11
3.1.12.1Snapshot Mode Menu ................................... 11
3.1.12.2Using the Interval Shoot ................................ 12
3.2 Movie Mode................................................................. 13
English
Table of Contents iii
BenQ DC 5530 User’s Manual
English
3.2.1 Movie Mode LCD Monitor Information ................. 13
3.2.2 Movie Mode Menu Settings .................................. 14
3.2.2.1 Movie Mode Menu....................................... 14
3.2.3 Timer Recording................................................. 15
3.3 Playback Mode............................................................. 15
3.3.1 Playback Mode LCD Monitor Information (Image).. 16
3.3.2 Viewing Images .................................................. 16
3.3.2.1 Magnifying Images ....................................... 16
3.3.2.2 Thumbnail Display (Index Playback)............... 16
3.3.2.3 Voice Memo................................................ 17
3.3.3 Deleting Files ..................................................... 17
3.3.4 Playback Mode Menu Settings............................... 17
3.3.4.1 Playback Mode Menu ................................... 17
3.3.5 Playback Mode LCD Monitor Information (Video) .. 19
3.3.6 Playing Back Video Clips...................................... 19
3.4 Setup Mode.................................................................. 19
3.4.1 Setup Mode Menu .............................................. 20
4. PC D
EPENDENT FEATURES .................................................. 23
4.1 Bundled Software ......................................................... 23
4.2 USB Mode.................................................................... 24
4.3 PictBridge Mode .......................................................... 24
ROUBLESHOOTING ............................................................. 25
5. T
6. S
PECIFICATIONS.................................................................... 27
7. S
ERVICE INFORMATION........................................................ 28
Table of Contentsiv
BenQ DC 5530 User’s Manual
1 TOURING YOUR DC E520+
1.1 Checking the Package Contents
Carefully unpack your kit box and ensure that you have the following items.
1. User’s Manual
2. DC E520+ digital
3. USB cable
4. Lithium-ion battery
5. Hand strap
6. DC E520+ software
7. Battery charger
8. AC power adapter
9. AV cable
If any of the items are missing or appear to be damaged, contact your dealer. Save the
packaging in case you need to ship your camera for service.
1.2 DC E520+ Components
English
camera
CD-ROM
(DLC-02)
1.2.1 Front View
1. Shutter button
2. Power button
3. Status LED indicator
4. Built-in flash
5. Self-timer LED indicator
6. Speaker
7. Lens/Lens cover
8. Tripod mount
9. Microphone
Touring your DC E520+ 1
BenQ DC 5530 User’s Manual
English
1.2.2 Rear View
1. LCD monitor
2. Inst. Play button
3. Inst. REC button
4. Strap eyelet
5. USB / AV port
6. Navigator -- four-way and
OK buttons
7. Menu button
8. DISP button
1.2.3 LED Indicators
Indicato rs State Description
Status LED
indicator
Self-timer LED
indicator
•
The LCD on the digital camera is manufactured with sophisticated technology; however,
the display may have some light spots or show unusual colors. This is normal and does
not indicate display malfunction, nor will this affect the pictures you take with the camera.
Solid green • The camera is powered up and ready to be used.
Blinking green • The camera is processing or accessing data.
Blinking orange • There are error or warni ng messages.
Solid red • The so und recording or movi e recording function s are activated.
Blinking red • The self-timer function is activated.
• The USB connection is in progress.
• The camera is in the power saving mode.
Touring your DC E520+2
BenQ DC 5530 User’s Manual
2 PREPARING YOUR DC E520+ FOR USE
2.1 Installing the Battery
We highly recommend that you use only the specified
rechargeable lithium-ion battery for your camera. Make
sure that the power of the camera is off before inserting
or removing the battery.
To insert the battery:
1. Open the battery/SD memory card cover (A).
2. Insert the battery in the correct direction shown
(B).
3. Push the battery all the way down, until the battery
lock lever clicks into place (C).
4. Close the battery/SD memory card cover (D).
To remove the battery:
1. Open the battery/SD memory card cover.
2. Release the battery lock lever.
3. When the battery has come out a little, gently pull it
out the rest of the way.
2.2 Charging the Battery
The battery charge status affects the performance of the
DC E520+. To maximize the performance and life of the battery, it is recommended that you
fully charge the battery using the specified charger set (charger and AC power adapter), and
then fully discharge it through the normal use at least one time. Make sure that the power of
the camera is off before inserting the battery.
1. Insert the battery into the charger as shown
in the illustration.
2. Connect one end of the AC power adapter
to the charger.
3. Connect the other end of the AC power
adapter to a wall outlet.
4. When the battery is being charged, the
charger LED indicator lights up in red.
When the battery is fully charged, it turns
into green.
The length of the charging time depends on the ambient temperature and the status of
the battery.
A
B
C
D
English
Preparing Your DC E520+ for Use 3
BenQ DC 5530 User’s Manual
English
• The DC E520+ must be used with the specified charger set. Damage caused by the use of
an incorrect charger set is not covered under the warranty. Always make sure that the
camera is off before removing the battery.
• The battery may be warm after being charged or used. This is normal and not a malfunc-
tion.
• When using the camera in cold environments, keep the camera and its battery warm by
holding it inside your jacket or other warm protective environment.
2.3 Inserting and Removing an SD Memory Card
The DC E520+ is equipped with 20MB internal memory, allowing you to record video clips,
capture images, or make voice files in the camera. You can also expand the memory capacity
by using an optional SD (Secure Digital) memory card to store more files.
1. Always make sure the camera is turned off before inserting
or removing a memory card.
2. I nsert an SD memo ry ca rd in t he co rrect dire ction , as s hown
in the illustration.
3. Close the battery/SD memory card cover.
To remove the SD memory card, make sure the camera is
turned off. Press lightly on the edge of the memory card and
it will eject.
• Be sure to fo rmat the SD memo ry card with th is cam-
era before the initial use.
• To prevent valuable data from being accidentally
erased from an SD memory card, you can slide the
write-protect tab (on the side of the SD memory card)
to “LOCK”.
• To save, edit, or erase data on an SD memory card,
you must unlock the card.
• While formatting the internal memory, do not insert a memory card into the camera. Oth-
erwise, the memory card is formatted instead of the camera’s internal memory.
• Formatting is an irreversible action and data cannot be recovered at a later time. Back up
your data before formatting.
• An SD memory card having read or write problems may not be properly formatted.
2.4 Setting the Date and Time
Before using your camera for the first time, please set the date and time. For more
information, refer to the table in 3.4.1 “Setup Mode Menu” on page 20.
Preparing Your DC E520+ for Use4
BenQ DC 5530 User’s Manual
3 USING THE DC E520+
3.1 Snapshot Mode
3.1.1 Getting started with capturing images
1. Press the [ ] button for more than one second to turn
on the camera.
2. Compose your image in the LCD monitor under
Snapshot Mode.
3. Press the shutter button down halfway (1), and then
press it down fully (2).
• Pressing the shutter button down halfway automati-
cally focuses and adjusts the exposure.
• The focus area frame turns green when the camera is
focused and the exposure is determined.
• When the focu s or exposure is not suitable, th e frame
of the focus area turns red.
• To review the last captured image, press the [ ] button.
Press the [ ] button to return to Snapshot Mode.
• The LCD monitor darkens in strong sunlight or bright
light. This is not a malfunction.
• To prevent your images from being blurred while pressing the shutter button, always
hold the camera steady. This is especially important when you are shooting under low
lighting conditions, under which your camera may reduce the shutter speed to ensure
your images are properly exposed.
• Pressing the [ ] button changes the LCD display in the sequence of: OSD Normal →
Detailed Info. → Info. Off.
• If QuickView is set to "On", the captured image will be displayed while the image is being
written onto the memory.
1
Press down halfway
2
Press down fully
English
Using the DC E520+ 5
BenQ DC 5530 User’s Manual
English
3.1.2 Snapshot Mode LCD Monitor Information
1. Shooting Mode
[]Auto
[]Manual
[]Portrait
[]Landscape
[]Night Scene
[]Sport
[]Back Light
2. Flash mode
[]Flash Auto
[]Flash On
[]Flash Off
[]Red Eye
[]Slow Sync
3. Self-timer icon (if used)
[]Self-timer (2s)
[ ] Self-timer (10s)
[]Interval Shoot
[]Burst
4. White Balance (if chosen [Detailed
Info] display)
[]Auto WB
[]Sunny
[]Cloudy
[]Tungsten
[]Fluorescent
5. EV (Exposure Value)
-0.3, -0.6, -1.0, -1.3, -1.6, -2.0, +0.3,
+0.6, +1.0, +1.3, +1.6, +2.0
6. ISO
[]ISO Auto
[ ] ISO 100
[ ] ISO 200
[ ] ISO 400
7. Metering
[]Center Avg.
[]Spot
[]Average
8. Image Quality
[]Fine
Normal
[]
9. Resolution (Image size)
[ ] 2560 x 1920
[ ] 2048 x 1536
[ ] 1600 x 1200
[ ] 1280 x 960
[ ] 640 x 480
10. Available number of shots
11. zoom status
12. AF Area
13. Battery power level indicator
[ ] Full battery power
[ ] Medium battery power
[ ] Low battery power
[ ] Virtually no battery power
Using the DC E520+6
Loading...