Benq CRW 8824MM, CRW 4424MP User Manual
Contents
Introduction...............................................................................2
Installation ................................................................................4
Hardware Installation................................................................4
CD-RW Burning Software Installation ......................................5
Operation..................................................................................6
Disc Loading/ Replacement......................................................6
Emergency Disc Unloading ......................................................6
MS-DOS, Windows 95, Windows 98, and Windows NT are registered trademarks of
Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Names
of products mentioned herein are used for identification purposes only and may be
trademarks and/or registered trademarks of their respective company.
E-1 USER MANUAL
Introduction
OPEN/STOP:
1.
playback
PLAY/SKIP:
2.
next program.
DISC IN Indicator:
3.
when searching data. See ‘Indicator Status Table’ for
details.
WRITING Indicator:
4.
tor Status Table' for details.
VOLUME CONTROL:
5.
HEADPHONE JACK:
6.
powered speakers.
EMERGENCY EJECT HOLE:
7.
a paper clip to open cover.
Push to open CD-RW cover or to stop music
Push once to play an audio CD; push again to
Lights when reading data and blinks
Blinks when writing data. See 'Indica-
Controls volume at headphone jack.
Stereo mini-jack for headphones and
In case of emergency, insert
USER MANUAL E-2
Indicator Status Table
Indication
WRITING DISC IN Status
OFF OFF CD-RW is ready, no disc
inside.
OFF Blinks green Power is ON and CD-RW in
standby mode. Music is on.
OFF Lights green. Disc inside and ready for
operation.
Blinks red Blinks green Test before writing data.
Lights red Blinks green Writing data.
POWER BUTTON:
8.
INTERFACE CONNECTOR:
9.
POWER CONNECTOR
10.
Switches CD-RW ON or OFF.
Connects CD-RW to PC.
E-3 USER MANUAL
Loading...