Benq 9H.LGVLA.TSE User Manual

E Series LCD Monitor

User Manual

Copyright

Copyright © 2017 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.

Disclaimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of BenQ Corporation to notify any person of such revision or changes.

The performance of flicker-free may be affected by external factors such as poor cable quality, unstable power supply, signal interference, or poor grounding, and not limited to the above mentioned external factors. (Applicable for flicker-free models only.)

BenQ ecoFACTS

BenQ has been dedicated to the design and development of greener product as part of its aspiration to realize the ideal of the "Bringing Enjoyment 'N Quality to Life" corporate vision with the ultimate goal to achieve a low-carbon society. Besides meeting international regulatory requirement and standards pertaining to environmental management, BenQ has spared no efforts in pushing our initiatives further to incorporate life cycle design in the aspects of material selection, manufacturing, packaging, transportation, using and disposal of the products. BenQ ecoFACTS label lists key eco-friendly design highlights of each product, hoping to ensure that consumers make informed green choices at purchase. Check out BenQ's CSR Website at

http://csr.BenQ.com/ for more details on BenQ's environmental commitments and

achievements.

Power Safety

0~3000 m10~90 %0~40 C 0~12000 m10~60 %-20~60 C

Please follow these safety instructions for best performance, and long life for your monitor.

• The AC plug isolates this equipment from the AC supply.

• The power supply cord serves as a power disconnect device for pluggable equipment. The socket outlet should be installed near the equipment and be easily accessible.

• This product should be operated from the type of power indicated on the marked label. If you are not sure of the type of power available, consult your dealer or local power company.

• The Class I pluggable equipment Type A must be connected to protective earth.

• An approved power cord greater or equal to H03VV-F or H05VV-F, 2G or 3G, 0.75mm2 must be used.

For Germany only:

• (If the weight of the product is less than or equal to 3 kg) An approved power cord greater or

equal to H03VV-F, 3G, 0.75mm2 must be used.

• (If the weight of the product is more than 3 kg) An approved power cord greater or equal to

H05VV-F or H05RR-F, 3G, 0.75mm2 must be used.

• (If a remote control is provided) RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

For models with adapter:

• Use only the power adapter supplied with your LCD Monitor. Use of another type of power adapter will result in malfunction and/or danger.

• Allow adequate ventilation around the adapter when using it to operate the device or charge the battery. Do not cover the power adapter with paper or other objects that will reduce cooling. Do not use the power adapter while it is inside a carrying case.

• Connect the power adapter to a proper power source.

• Do not attempt to service the power adapter. There are no service parts inside. Replace the unit if it is damaged or exposed to excess moisture.

Care And Cleaning

• Do not place the monitor face down on the floor or a desk surface directly. Otherwise, scratches on the panel surface may occur.

• The equipment is to be secured to the building structure before operation.

• (For models that support wall or ceiling mounting)

• Install your monitor and monitor mounting kit on a wall with flat surface.

• Ensure that the wall material and the standard wall mount bracket (purchased separately) are stable enough to support the weight of the monitor.

• Turn off the monitor and the power before disconnecting the cables from the LCD monitor.

• Always unplug the product from the power outlet before cleaning. Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass cleaners.

• Slots and openings on the back or top of the cabinet are for ventilation. They must not be blocked or covered. Your monitor should never be placed near or over a radiator or heat sources, or in a built-in installation unless proper ventilation is provided.

• Do not place heavy loads on the monitor to avoid possible personal injury or damage to the monitor.

• Consider keeping the box and packaging in storage for use in the future when you may need to transport the monitor.

• Refer to the product label for information on power rating, manufacture date, and identification markings.

Servicing

• Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltages or other risks. If any of the above mentioned misuse or other accident such as dropping or mishandling occurs, contact qualified service personnel for servicing.

• Contact your place of purchase or visit the local website from www.BenQ.com for more support.

Caution

• The monitor should be 50 ~ 70 cm (20 ~ 28 inches) away from your eyes.

• Looking at the screen for an extended period of time causes eye fatigue and may deteriorate your eyesight. Rest your eyes for 5 ~ 10 minutes for every 1 hour of product use.

• Reduce your eye strain by focusing on objects far way.

• Frequent blinking and eye exercise help keep your eyes from drying out.

Table of Contents

Copyright ...................................................................................................................................... 2

Getting started .............................................................................................................................6

Getting to know your monitor ................................................................................................9

Front view .................................................................................................................................................... 9

Back view ...................................................................................................................................................10

How to assemble your monitor hardware .........................................................................11

How to detach the stand and the base ...............................................................................................16

Using the monitor wall mounting kit (Models with VESA standard mounting holes) ..............18

Getting the most from your BenQ monitor ......................................................................19

How to install the monitor on a new computer ..............................................................................20

How to upgrade the monitor on an existing computer ................................................................. 21

How to install on Windows 10 system ...............................................................................................22

How to install on Windows 8 (8.1) system .......................................................................................23

How to install on Windows 7 system ................................................................................................. 24

How to adjust your monitor ..................................................................................................25

The control panel..................................................................................................................................... 25

Basic menu operation .............................................................................................................................. 26

Picture optimization (selected models only) .....................................................................................28

Customizing the hot keys....................................................................................................................... 28

Adjusting display mode............................................................................................................................ 28

Activating FreeSync (selected models only)....................................................................................... 29

Choosing an appropriate picture mode.............................................................................................. 29

Connecting the monitor to your MacBook series product ........................................................... 29

Adjusting screen brightness automatically (Bright Intelligence) (selected models only) ......... 29

Adjusting screen brightness automatically (Bright Intelligence Plus)

(Models with HDR feature only) .......................................................................................................... 30

Working with HDR technology (Models with HDR feature only)............................................... 30

Navigating the main menu .......................................................................................................32

Eye Care menu ......................................................................................................................................... 33

Picture menu .............................................................................................................................................36

Picture Advanced menu ..........................................................................................................................38

Display menu (selected models only) ..................................................................................................42

Audio menu ...............................................................................................................................................44

System menu .............................................................................................................................................46

Troubleshooting ........................................................................................................................50

Frequently asked questions (FAQ)....................................................................................................... 50

Need more help?...................................................................................................................................... 52

11/17/17

Getting started

When unpacking please check you have the following items. If any are missing or damaged, please contact the place of purchase for a replacement.

BenQ LCD Monitor

(Models with HDR feature)

Monitor Stand

Monitor Base

Quick Start Guide

CD-ROM

6 Getting started

Power Cord (Picture may differ from product supplied for your region.)

Power Adapter (Models without standard VESA mounting holes)

Video Cable: D-Sub (Optional accessory)

Video Cable: HDMI

Video Cable: DP to mini DP (EW32 only)

Video Cable: DP (Optional accessory)

Video Cable: USB Type-C (For models with USB Type-C socket only)

Use of the supplied USB Type-C cable is recommended to ensure data transmission quality.

Audio Cable (Optional accessory)

7 Getting started

• Available accessories and the pictures shown here may differ from the actual contents and the product supplied for your region. And the package contents may subject to change without prior notice. For cables that are not supplied with your product, you can purchase them separately.

• Consider keeping the box and packaging in storage for use in the future when you may need to transport the monitor. The fitted foam packing is ideal for protecting the monitor during transport.

Always keep the product and accessories out of reach of small children.

8 Getting started

Getting to know your monitor

234

Front view

(Models with HDR feature)

1. Light sensor

2. Control buttons

3. Power button

4. Bright Intelligence hot key (Models with HDR feature) HDR / Bright Intelligence Plus hot key

9 Getting to know your monitor

Back view

7511

5136 12

EW27

8510

5136

EW32

EL2870U

6910 1314

EW3270U

14 13691510

5. Speakers

6. HDMI socket x 2

7. D-Sub socket

8. Mini DisplayPort socket

9. DisplayPort socket

10. Headphone jack

11. Audio Line In

12. DC power input jack

13. Kensington lock slot

14. AC power input jack

15. USB Type-C port

• Above diagram may vary depending on the model.

• Picture may differ from product supplied for your region.

10 Getting to know your monitor

How to assemble your monitor hardware

Models without VESA standard mounting holes Models with VESA standard mounting holes

• If the computer is turned on you must turn it off before continuing. Do not plug-in or turn-on the power to the monitor until instructed to do so.

• The following illustrations are for your reference only. Available input and output jacks may vary depending on the purchased model.

• Avoid finger pressure on the screen surface.

1. Attach the monitor base.

Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor around on your desk will scratch or damage the monitor surround and controls.

Protect the monitor and screen by clearing a flat open area on your desk and placing a soft item like the monitor packaging bag on the desk for padding.

Gently lay the screen face down on a flat clean padded surface.

Attach the monitor stand to the monitor base as illustrated until it locks in place.

Tighten the screw on the bottom of the monitor base as illustrated.

11 How to assemble your monitor hardware

Orient and align the stand arm with the monitor, then push them together until they click and lock into

Models without VESA standard mounting holes Models with VESA standard mounting holes

Models without VESA standard mounting holes Models with VESA standard mounting holesModels with VESA standard mounting holes

EW3270U

place.

Tighten the screw(s) that fixes the stand to the monitor.

To secure or release a screw, a flat-head screwdriver or a coin is required.

Depending on the monitor size, there may be more than one screw that fixes the stand to the monitor. The illustrations in this document are for your reference only and may look different from the appearance of the product.

12 How to assemble your monitor hardware

Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.

Models without VESA standard mounting holes Models with VESA standard mounting holes

or or or or or

You should position the monitor and angle the screen to minimize unwanted reflections from other light sources.

Your monitor is an edge-to-edge monitor and should be handled with care. Avoid finger pressure on the screen surface. Adjust the screen angle by placing your hands on the top and on the base of the monitor as illustrated. Excessive force on the display is prohibited.

2. Connect the PC video cable.

The video cables included in your package and the socket illustrations may vary depending on the product supplied for your region.

13 How to assemble your monitor hardware

• Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket.

• Connect the plug of the HDMI cable to the HDMI port on the monitor. Connect the other end of the cable to the HDMI port of a digital output device.

• Connect the plug of the DP cable to the monitor video socket. Connect the other end of the cable to the computer video socket.

• Connect the plug of the mini DP cable to the monitor video socket. Connect the other end of the cable to the computer video socket.

• Connect the plug of the supplied USB Type-C cable to the USB Type-C port on the monitor. It allows signal, audio, and data transmission from the laptop to the monitor.

Tighten all finger screws to prevent the plugs from accidently falling out during use.

• If there is more than one video transmission method available to you, you might want to take the picture quality of each video cable into consideration before making the connection.

- Better quality: HDMI / mini DP / DP / USB Type-C

- Good quality: D-Sub

• The Type-C port on the monitor transfers data only and does not support power delivery to the laptop. Additional power supply to the connected laptop is required.

3. Connect the audio cable. (Selected models only)

• Connect the audio cable between the socket on the

rear of the monitor (Line In) and your computer audio outlet.

• You may connect headphones to the headphone jack

found next to the Line In jack of the monitor.

14 How to assemble your monitor hardware

4. Connect the power cable to the monitor.

(Models without VESA standard mounting holes)

Connect the power cord to the power adapter. Plug one end of the power cord into the socket labelled on the rear of the monitor. Do not connect the other end to a power outlet just yet.

Models without VESA standard mounting holes

(Models with VESA standard mounting holes)

Plug one end of the power cord into the socket labelled

on the rear of the monitor. Do not connect the

other end to a power outlet just yet.

5. Connect-to and turn-on the power.

Plug the other end of the power cord into a power outlet and turn it on.

Picture may differ from product supplied for your region.

Turn on the monitor by pressing the power button on the monitor.

Models with VESA standard mounting holes

Turn on the computer too, and follow the instructions in Getting the most from your BenQ monitor on page

19 to install the monitor software.

To extend the service life of the product, we recommend that you use your computer's power management function.

15 How to assemble your monitor hardware

How to detach the stand and the base

Models without VESA standard mounting holes Models with VESA standard mounting holes

EW3270U

1. Prepare the monitor and area.

Turn off the monitor and the power before unplugging the power cable. Turn off the computer before unplugging the monitor signal cable.

Protect the monitor and screen by clearing a flat open area on your desk and placing a soft item like a towel on the desk for padding, before laying the screen face down on a flat clean padded surface.

2. Remove the monitor stand.

Release the screw(s) that fixes the stand to the monitor. Then pull the monitor stand backward away from the monitor.

To secure or release a screw, a flat-head screwdriver or a coin is required.

16 How to assemble your monitor hardware

+ 36 hidden pages