Benq 9H.LGMLB.QBE User Manual

XL Series User Manual

Copyright

Copyright © 2017 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.

Disclaimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of BenQ Corporation to notify any person of such revision or changes.

The performance of flicker-free may be affected by external factors such as poor cable quality, unstable power supply, signal interference, or poor grounding, and not limited to the above mentioned external factors. (Applicable for flicker-free models only.)

BenQ ecoFACTS

BenQ has been dedicated to the design and development of greener product as part of its aspiration to realize the ideal of the "Bringing Enjoyment 'N Quality to Life" corporate vision with the ultimate goal to achieve a low-carbon society. Besides meeting international regulatory requirement and standards pertaining to environmental management, BenQ has spared no efforts in pushing our initiatives further to incorporate life cycle design in the aspects of material selection, manufacturing, packaging, transportation, using and disposal of the products. BenQ ecoFACTS label lists key eco-friendly design highlights of each product, hoping to ensure that consumers make informed green choices at purchase. Check out BenQ's CSR Website at

http://csr.BenQ.com/ for more details on BenQ's environmental commitments and

achievements.

Power Safety

0~3000 m10~90 %0~40 C 0~12000 m10~60 %-20~60 C

Please follow these safety instructions for best performance, and long life for your monitor.

• The AC plug isolates this equipment from the AC supply.

• The power supply cord serves as a power disconnect device for pluggable equipment. The socket outlet should be installed near the equipment and be easily accessible.

• This product should be operated from the type of power indicated on the marked label. If you are not sure of the type of power available, consult your dealer or local power company.

• The Class I pluggable equipment Type A must be connected to protective earth.

• An approved power cord greater or equal to H03VV-F or H05VV-F, 2G or 3G, 0.75mm2 must be used.

For Germany only:

• (If the weight of the product is less than or equal to 3 kg) An approved power cord greater or

equal to H03VV-F, 3G, 0.75mm2 must be used.

• (If the weight of the product is more than 3 kg) An approved power cord greater or equal to

H05VV-F or H05RR-F, 3G, 0.75mm2 must be used.

• (If a remote control is provided) RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

For models with adapter:

• Use only the power adapter supplied with your LCD Monitor. Use of another type of power adapter will result in malfunction and/or danger.

• Allow adequate ventilation around the adapter when using it to operate the device or charge the battery. Do not cover the power adapter with paper or other objects that will reduce cooling. Do not use the power adapter while it is inside a carrying case.

• Connect the power adapter to a proper power source.

• Do not attempt to service the power adapter. There are no service parts inside. Replace the unit if it is damaged or exposed to excess moisture.

Care And Cleaning

• Do not place the monitor face down on the floor or a desk surface directly. Otherwise, scratches on the panel surface may occur.

• The equipment is to be secured to the building structure before operation.

• (For models that support wall or ceiling mounting)

• Install your monitor and monitor mounting kit on a wall with flat surface.

• Ensure that the wall material and the standard wall mount bracket (purchased separately) are stable enough to support the weight of the monitor.

• Turn off the monitor and the power before disconnecting the cables from the LCD monitor.

• Always unplug the product from the power outlet before cleaning. Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass cleaners.

• Slots and openings on the back or top of the cabinet are for ventilation. They must not be blocked or covered. Your monitor should never be placed near or over a radiator or heat sources, or in a built-in installation unless proper ventilation is provided.

• Do not place heavy loads on the monitor to avoid possible personal injury or damage to the monitor.

• Consider keeping the box and packaging in storage for use in the future when you may need to transport the monitor.

• Refer to the product label for information on power rating, manufacture date, and identification markings.

Servicing

• Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltages or other risks. If any of the above mentioned misuse or other accident such as dropping or mishandling occurs, contact qualified service personnel for servicing.

• Contact your place of purchase or visit the local website from www.BenQ.com for more support.

Caution

• The monitor should be 50 ~ 70 cm (20 ~ 28 inches) away from your eyes.

• Looking at the screen for an extended period of time causes eye fatigue and may deteriorate your eyesight. Rest your eyes for 5 ~ 10 minutes for every 1 hour of product use.

• Reduce your eye strain by focusing on objects far way.

• Frequent blinking and eye exercise help keep your eyes from drying out.

Table of Contents

Copyright ...................................................................................................................................... 2

Disclaimer ..................................................................................................................................... 2

Power Safety ................................................................................................................................3

Getting started .............................................................................................................................7

Getting to know your monitor ................................................................................................9

Front view .................................................................................................................................................... 9

Back view...................................................................................................................................................... 9

Input and output ports............................................................................................................................ 10

Connection ................................................................................................................................................11

How to assemble your monitor hardware .........................................................................12

How to detach the stand and the base ...............................................................................................18

Adjusting the monitor height ................................................................................................................20

Viewing angle adjustment ....................................................................................................................... 21

Rotating the monitor ............................................................................................................................... 22

Installing the Shield (shading hood) ......................................................................................................24

Using the monitor wall mounting kit ...................................................................................................26

Getting the most from your BenQ ZOWIE monitor ......................................................27

How to install the monitor on a new computer ..............................................................................28

How to upgrade the monitor on an existing computer ................................................................. 29

How to install on Windows 10 system ...............................................................................................30

How to install on Windows 8 (8.1) system .......................................................................................31

How to install on Windows 7 system ................................................................................................. 32

How to adjust your monitor ..................................................................................................33

The control panel..................................................................................................................................... 33

The S Switch ..............................................................................................................................................34

Basic menu operation.............................................................................................................................. 35

Initial setup for playing games at 144 Hz / 240 Hz ...........................................................................37

Customizing the hot keys....................................................................................................................... 38

Adjusting Dynamic Accuracy (selected models only) ...................................................................... 39

Setting up your own game mode.......................................................................................................... 39

Working with game mode to go by S Switch .................................................................................... 39

Adjusting display mode............................................................................................................................ 40

Using Smart Scaling .................................................................................................................................. 40

Using Instant Mode .................................................................................................................................. 40

Activating VESA standard DisplayPort Adaptive-Sync (XL2540 only)......................................... 41

Navigating the main menu .......................................................................................................42

Game Settings menu ................................................................................................................................ 43

Picture menu .............................................................................................................................................45

Display menu .............................................................................................................................................48

System menu .............................................................................................................................................51

Troubleshooting ........................................................................................................................55

Frequently asked questions (FAQ) ...................................................................................................... 55

Need more help?...................................................................................................................................... 57

7/21/17

Getting started

When unpacking please check you have the following items. If any are missing or damaged, please contact the place of purchase for a replacement.

BenQ ZOWIE LCD Monitor

Monitor Stand

Monitor Base

S Switch (Swift Switch)

Quick Start Guide

CD-ROM

Power Cord (Picture may differ from product supplied for your region.)

7 Getting started

USB Cable

Video Cable: DVI-D Dual Link (Optional accessory)

Video Cable: HDMI (Optional accessory)

Video Cable: DP

Protective cover

Shield (Shading hood)

• Available accessories and the pictures shown here may differ from the actual contents and the product supplied for your region. And the package contents may subject to change without prior notice. For cables that are not supplied with your product, you can purchase them separately.

• Consider keeping the box and packaging in storage for use in the future when you may need to transport the monitor. The fitted foam packing is ideal for protecting the monitor during transport.

Always keep the product and accessories out of reach of small children.

8 Getting started

Getting to know your monitor

Front view

Back view

1. Control buttons

2. Power button

3. Handle

4. Input and output ports (vary by model, see Input and output

ports on page 10)

5. Kensington lock slot

9 Getting to know your monitor

6 7

• Above diagram may vary depending on the model.

1234578

• Picture may differ from the product supplied for your region.

6. VESA mount release button

7. Headphone hook

8. USB port x 2 (downstream; connecting to USB devices)

9. Headphone jack

10. Microphone jack

11. Cable management hole

Input and output ports

Available input and output ports may vary depending on your purchased model. Check the Specification document on the provided CD for details.

1. AC Power Input jack

2. Mic-In jack

3. S Switch socket

4. DVI-D socket (*)

5. HDMI-2 (1.4) socket (*) (for XL2536) HDMI-2 (2.0) socket (*)

6. HDMI-1 (2.0) socket (*)

7. DisplayPort socket (*)

8. USB port (upstream; connecting to the PC)

• *: Refer to Maximum resolution supported by each port on page 10 for more information.

• HDMI-1 (2.0) only works with compatible graphic cards and devices. Compatible issue may occur when the HDMI-1 (2.0) input port conducts with a HDMI 1.4 output port.

Maximum resolution supported by each port

Input port XL2536

HDMI 1.4 N/A 1920x1080@120Hz 2560x 1440 @60 Hz

HDMI 2.0 1920x1080@144Hz 1920x1080@240Hz 2560x 1440 @144Hz

DP 1920x1080@144Hz 1920x1080@240Hz 2560x 1440 @144Hz

DVI 1920x1080@144Hz 1920x1080@144Hz 2560x 1440 @60 Hz

10 Getting to know your monitor

XL2540 / XL2546 /

XL2740

XL2735

Connection

HDMI 2.0HDMI 1.4 /

HDMI 2.0 (XL2536)

The following connection illustrations are for your reference only. For cables that are not supplied with your product, you can purchase them separately.

For detailed connection methods, see page 14 - 16.

11 Getting to know your monitor

How to assemble your monitor hardware

Open

Lock

• If the computer is turned on you must turn it off before continuing. Do not plug-in or turn-on the power to the monitor until instructed to do so.

• The following illustrations are for your reference only. The location and available input and output jacks may vary depending on the purchased model.

1. Attach the monitor base.

Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor around on your desk will scratch or damage the monitor surround and controls.

Protect the monitor and screen by clearing a flat open area on your desk and placing a soft item like the monitor packaging bag on the desk for padding.

Gently lay the screen face down on a flat clean padded surface.

Orient and align the stand arm with the monitor

( ), push them together until they click and lock

into place ( ).

Orient and align the stand base socket with the end of the stand arm. Make sure to align the arrow on the end of the stand to the one on the monitor base.

12 How to assemble your monitor hardware

Turn the base counterclockwise until you cannot

Open

Lock

ock

Open

Lock

Open

Lock

go further.

Raise the thumbscrew lid ( ) and tighten the

thumbscrew as illustrated ( ). Then push the lid back.

Carefully put down the stand and the base.

Gently attempt to pull the stand and the base back apart to check that they have properly engaged.

Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.

To move the monitor, you must hold the handle and the bottom of the stand base at the same time as illustrated. You can protect the monitor using the supplied protective cover.

13 How to assemble your monitor hardware

You might want to adjust the monitor stand height.

See Adjusting the monitor height on page 20 for more information.

You should position the monitor and angle the screen to minimize unwanted reflections from other light sources.

2. Connect the PC video cable.

To Connect the DVI-D Dual Link Cable

Connect the plug of the DVI-D Dual Link cable to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket.

Tighten all finger screws to prevent the plugs from accidently falling out during use.

To Connect the HDMI Cable

Connect the plug of the HDMI cable to the HDMI port on the monitor. Connect the other end of the cable to the HDMI port of a digital output device.

Either

14 How to assemble your monitor hardware

To Connect the DP Cable

Connect the plug of the DP cable to the monitor video socket. Connect the other end of the cable to the computer video socket.

The video cables included in your package and the socket illustrations on the right may vary depending on the product supplied for your region.

3. Connect the S Switch to the monitor.

Connect the S Switch to the S Switch socket found on the back of the monitor. And place the S Switch properly on your monitor base.

4. Connect the headset.

Connect the headphone connector of your headset to the headphone jack found on the left side of the monitor.

Connect the audio cable between the PC and the monitor (via the Mic-In jack at the back). And then connect your microphone connector on the headset to the microphone jack at the left side of the monitor.

The headphone jacks work only when the audio source is HDMI or DisplayPort.

The audio source may not work on headphone jack under certain resolution (2560 x 1440, 144Hz) due to the graphic limitation on some of the graphic cards.

15 How to assemble your monitor hardware

You may connect the headphones to the headphone jack

found on the left side of the monitor.

5. Using the headphone hook.

Push to release the headphone hook found on the

left side of the monitor ( ). And pull out the

headphone hook ( ).

Leave your headset on the headphone hook if needed.

The maximum load capacity of the headphone hook is 400g.

6. Connect USB devices.

Connect the USB cable between the PC and the monitor (via the upstream USB port at the back). This upstream USB port transmits data between the PC and the USB devices connected to the monitor.

Connect USB devices via other USB ports (downstream) on the monitor. These downstream USB ports transmit data between connected USB devices and the upstream port.

See picture on the right.

TV OUT

PDIF-OUT

SD I F-OUT

16 How to assemble your monitor hardware

7. Connect the power cable to the monitor.

Plug one end of the power cord into the socket labelled on the rear of the monitor. Do not connect the other end to a power outlet just yet.

8. Organize the cables.

9. Connect-to and turn-on the power.

Plug the other end of the power cord into a power outlet and turn it on.

Picture may differ from product supplied for your region.

Turn on the monitor by pressing the power button on the monitor.

Turn on the computer too, and follow the instructions in Getting the most from your BenQ

ZOWIE monitor on page 27 to install the monitor

software.

To extend the service life of the product, we recommend that you use your computer's power management function.

When the monitor is powered on, to prevent overheating, do not cover the monitor with the supplied protective cover or obstruct the ventilation holes.

17 How to assemble your monitor hardware

How to detach the stand and the base

Open

Lock

Open

Lock

ock

Open

Lock

1. Prepare the monitor and area.

Turn off the monitor and the power before unplugging the power cable. Turn off the computer before unplugging the monitor signal cable.

Protect the monitor and screen by clearing a flat open area on your desk and placing a soft item like a towel on the desk for padding, before laying the screen face down on a flat clean padded surface.

2. Remove the monitor base.

Raise the thumbscrew lid ( ) and release the

thumbscrew as illustrated ( ).

Turn the base clockwise until you cannot go further.

18 How to assemble your monitor hardware

+ 39 hidden pages