BENDIX BW7245, UHB3044-CVSP User Manual

®
®
SPICER® REPLACE-A-BRAKE
KITS COMBINE CONVENIENCE WITH GENUINE OEM QUALITY
Enjoy the best of both worlds – the quality and performance of Genuine Spicer brakes and the convenience of it all being in one box. Each Replace-A­Brake replacement brake kit includes two application­specific lining shoes and a matching hardware kit. It’s exactly what you need to keep your wheel end in top braking condition.
Spicer Brake Linings
Spicer brake linings are available for both standard and extended service platforms and cover a wide range of needs from typical over-the-road hauling to the most severe service applications. All Spicer brake linings meet or exceed original equipment and FMVSS121* performance standards.
For consistent, reliable braking performance make sure your stopping power begins with Spicer engineered brake linings.
Spicer Brake Hardware Kits
Spicer brake hardware kits are engineered to the highest original equipment standards. Each hardware kit is designed to match the application-specific performance of the Spicer lined shoes included in each Replace-A-Brake kit. For ease of installation and assured quality, you can count on Spicer brake hardware kits.
For unmatched quality and convenience, choose Spicer Replace-A-Brake kits.
*Federal Motor Vehicle Safety Standards
Spicer Linings Typical Application Chart
Typical Application Platform Good Better Best
Refuse T ruck
Mixer (Tandem Axle)
Tandem Dump
Beverage
School Bus
Tri-Axle Dump Trailer
Tanker
Double
Moving Van ­Low Profile
Standard Platform Yellow Gold Orange
Extended Service Platform ES690 ES440 ES1100
Standard Platform Yellow Gold Orange
Extended Service Platform ES690 ES440 ES1100
Standard Platform Yellow Gold Orange
Extended Service Platform ES690 ES440 ES1100
Standard Platform Blue Red Gold
Extended Service Platform ES420 ES600 ES440
Standard Platform Blue Red Gold
Extended Service Platform ES420 ES600 ES440
Standard Platform Red Gold Orange
Extended Service Platform ES600 ES440 ES1100
Standard Platform Blue Red Gold
Extended Service Platform ES420 ES600 ES440
Standard Platform Silver Blue Red
Extended Service Platform ES410 ES420 ES600
Standard Platform N/A N/A Red
Extended Service Platform N/A N/A ES310
Tandem Axle Tractor Trailer
Flatbed
Single Axle Tractor Trailer
Standard Platform Silver Blue Red
Extended Service Platform ES410 ES420 ES600
Standard Platform Silver Blue Red
Extended Service Platform ES410 ES420 ES600
Standard Platform Red Yellow Gold
Extended Service Platform ES600 ES690 ES440
GAWR Standard Platform Extended Service Platform General Application
17,000 Green Light duty friction for mid-range trucks and container chassis 20,000 ES310 High temperature friction formulated specifically for use
with the 15” reduced envelope brake package
Silver ES410 Medium grade friction for line haul and city
pick-up and delivery applications
Blue ES420 Premium grade friction giving long lining life and long drum life
for line haul, city pick-up and delivery and school bus applications
ES450 Cohesive friction for long haul applications
23,000 Red ES600 Long life friction for typical over the road applications
Yellow ES690 Premium grade friction for line haul and vocational applications
Gold ES440 Quiet long life friction for high duty cycle applications such
as school bus and beverage trucks Orange ES1160 Severe service combination friction Bronze ES1100 Severe service full metallic friction
25,000 ES1050 Severe service friction for vocational applications
Standard Platform Friction - Developed for use on all industry standard platform and double anchor pin applications
Extended Service Platform Friction - Developed specifically for use with Spicer single anchor pin extended service brake packages. This increased density friction is 22% thicker than the industry standard platform lining. The combination of increased density and increased thickness allows for a 30% to 35% wearable life expectancy increase when compared to the standard platform lining.
UHB3044-CVSP ©Dana Corporation, 2002
®
Commercial Vehicle Service Parts Dana Corporation
P.O. Box 321 Toledo, OH 43697-0321 www.dana.com
Loading...