BENDIX TCH-013-008 User Manual

Technical Bulletin

Bulletin No: TCH-013-008 Effective Date: 9/24/04 Cancels: N/A Page: 1 of 1

Subject: Bendix

Speed Sensors

90 DEGREE

BENDIX® WS-24

WHEEL SPEED

SENSOR

STRAIGHT

BENDIX® WS-24™ WHEEL

SPEED SENSOR

®

is Replacing WS-20™ with WS-24™ Antilock Wheel

PREVIOUS BENDIX WHEEL SPEED SENSORS

™

The WS-24™ sensor fit and function is compatible with all

previous Bendix wheel speed sensors.

FIGURE 1 - WHEEL SPEED SENSORS

As a product improvement, Bendix® WS-20™ wheel
speed sensors are being replaced by the new WS-24
wheel speed sensors.

Please note that WS-24™ wheel speed sensors must
use clamping sleeve p/n 5012878 instead of p/n

5006849. Always use correct clamping sleeves to avoid
problems associated with reduced retention force, such
as sensor movement and resulting ABS trouble codes.

The fit and function of the WS-24™ wheel speed sensor
is compatible with all previous Bendix sensors.

Reference

Order Service Data sheets (by BW number) or download
them from www.bendix.com. The Service Data sheet
for Bendix® WS-24™ wheel speed sensors is
SD-13-4860 (BW2364), and for Bendix® WS-20™ wheel
speed sensors use SD-13-4754 (BW1662).

© 2004 Bendix Commercial Vehicle Systems LLC 9/2004. All Rights Reserved. Printed in U.S.A.

™

FIGURE 2 - PREVIOUS AND NEW CLAMPING
SLEEVES

P/N 5006849

PREVIOUS
CLAMPING

SLEEVES

HAVE “BW” IN

A DIAMOND

P/N 5012878

CORRECT

CLAMPING

SLEEVES

HAVE “BX” IN

A SWOOSH

SYMBOL