BENDIX PNU-186 User Manual
Part Number Update
Bulletin No: PNU-186 Effective Date: January 13, 2014 Cancels: NA Page: 1 of 2
Subject: Bendix® Slack Adjuster OEM Replacement Part Numbers Announced
Bendix announces that OEM Bendix® ASA-5® slack adjusters are being obsoleted and will remain active and saleable
only while supplies last. Once the inventory is depleted, all orders placed will be lled by the equivalent Bendix®
Versajust® LS™ Slack Adjuster with the WearMax™ Clutch. This Bulletin shows the OEM Bendix Versajust LS slack
adjuster part number replacements, as well some new OEM Bendix Versajust LS slack adjuster units for use with
welded clevis chambers. Please use the new part numbers for future orders.
See Part Number Update PNU-184 for service replacement part numbers.
Long Pin shown
(Short Pin used for
welded clevises)
Thread
Adapter Thread
are NOT INTERCHANGEABLE.
1.3 inches*
Yoke
Spline (Select by
diameter and number
of teeth)
*Note: Pin Centers are 1.3 inches
apart for Versajust LS Slack
Adjusters - for ASA-5 Slack
Adjusters the distance is 1 inch.
Bendix® ASA-5
Automatic Slack
Adjuster Exterior
Part Number Etched Here
®
Bendix® Versajust
Automatic Slack Adjuster
Exterior
®
LS
Bendix Versajust LS
™
Quick-Connect
Style Yoke Kit
Adapter
Bendix Versajust LS
Easy-On
Style Yoke
NOTE: ASA-5 and Versajust LS Slack Adjuster YOKES
Section A — OE Slack Adjusters WITH Yokes:
Bendix® ASA-5® to Bendix® Versajust® LS™ slack adjuster equivalents.
Arm
Length
Camshaft
Spline
(Dia.- Teeth)
Adapter
Thread
Yoke Style Lube Fitting
5.0" 1.25" - 24 None Quick Connect 0° 5016843 K102358
1.50" - 10 5/8" Quick Connect 0° 106195 K043123
5/8"
0°
Easy On
5.5"
1.50" - 28
1.50" - 10
5/8" 90°
5/8"
None 90° 108645 K102361
Quick Connect
0° 106204 K031529
5/8" Easy On 90° 108092 K041874
5/8" Quick Connect 0° 106194 K043085
1.50" - 28 5/8" Easy On 0°
6.0"
1.50" - 28 5/8" Easy On 45° 107278 K047392
1.50" - 28 None Quick Connect 90° 108430 K102364
1.50" - 28 5/8" Quick Connect 0°
1.63" - 37 5/8" Easy On 0° 107102 K102365
Obsolete Bendix® ASA-5®
Slack Adjuster
OE Part No.
107105
K020298
108068
108371
5015679
107101
K020299
106201
106926
Order Bendix® Versajust® LS™
Slack Adjuster
OE Part No.
K047176
K043196
K047391107127
K047390
Arm
Length
Lube Fitting
(0° shown)
Bulletin No: PNU-186 Effective Date: January 13, 2014 Cancels: NA Page: 2 of 2
Section B — New Bendix® Versajust® LS™ Slack Adjusters WITHOUT Yokes
These are for use with welded clevis chambers with 1.3 inch pin-to-pin spacing.
1.3 inches
1.3 inches
Welded Clevis Chamber
Bendix Versajust LS Slack
Adjuster - No Yoke Version
Bendix® Versajust® LS™ Slack
Adjuster - No Yoke Version
Welded Clevis Chamber
New OE Bendix Versajust LS Slack Adjusters WITHOUT Yokes:
Arm
Length
5.0"
5.5"
6.0"
Bendix®
Versajust® LS™
OE Part Number
Camshaft Spline
(Diameter - Teeth)
K096191
K096196 45°
1.25" - 24
K096193 90°
K096194 1.50" - 10 45°
K096192
K096195 45°
K041480
K047163 90°
1.50" - 28
1.25" - 10
K047160
K047161 45°
1.50" - 10
K041479 90°
K046808
K046804 45°
1.50" - 28
K041743 90°
K043149
K047206 45°
1.50" - 10
K041477 90°
K047204
K047205 45°
1.50" - 28
K041478 90°
Lube
Fitting
0°
0°
0°
0°
0°
0°
0°
Reference Document:
The Service Data Sheet for the Bendix® Versajust® LS™ slack adjuster
with the WearMax™ Clutch is SD-05-4630. This document is available
for download from the Bendix Document Library at www.bendix.com,
or may be ordered from the Marketing Center.
For more information contact your Bendix Account Manager or Plant at
1-800-AIR-BRAKE (1-800-247-2725).
Log-on and Learn from the Best
On-line training that's available when you are 24/7/365.
Visit www.brake-school.com.
© 2014 Bendix Commercial Vehicle Systems LLC, a member of the Knorr-Bremse Group • 1/14 • All Rights Reserved.
Loading...