DENTAL CHAIR
OPERATING
INSTRUCTIONS
IMPORTANT
This manual provides operating instructions for the BELMONT CLESTA-II. The instructions contained in this booklet should be thoroughly read and understood before operating the chair.
After the installation is completed, keep this manual in a safe place and referto it for future maintenance.
TABLE OF CONTENTS |
|
|
Page |
1. OVERALL VIEW AND MAJOR COMPONENTS |
--------------------------- 1 |
2. DIMENSIONS AND SPECIFICATIONS--------------------------------------- |
1 |
3. OPERATING INSTRUCTIONS |
|
3-1. MAIN SWITCH--------------------------------------------------------------- |
2 |
3-2. CONTROLS------------------------------------------------------------------- |
2 |
3-3. SAFETY LOCK DEVICE--------------------------------------------------- |
3 |
3-4. HEADREST OPERATIONS------------------------------------------------ |
3 |
4. AUTO MODE POSITION ADJUSTMENT------------------------------------ |
3 |
5. CARE AND MAINTENANCE--------------------------------------------------- |
4 |
6. ELECTROMAGNETIC COMPATIBILITY(EMC)--------------------------- |
5 |
Intended Use of the Product
This product is intended for the exclusive use for diagnoses, treatments and relative procedures of dentistry, and must be operated or handled by the qualified dentists or by dental staffs under the supervision of the dentist.
Such dentists or dental staffs should instruct and/or assist the patients to approach to and leave from the product.
Patients should not be allowed to operate or handle the product unless he/she is so instructed.
Environmental Requirements |
|
- +40 |
|
Storage -10 - +50 |
|
|
Ambient Temperature |
Operating +5 |
|
|
|
||
|
|
|
|
|||
Humidity |
10 % - 80% |
|
|
|
|
|
Atmospherical Pressure |
600 hPa - 1060 hPa |
|
|
|
||
Important Notes
In case of the troubles, please contat Takara Belmont offices or your dealers.
Do not disassemble or attempt to repair.
Disassembly, repair or modifications shoud only be done by a qualified repair technician. Attempts at disassembly, repair or modifications may lead to abnormal operation and accidents.
1. OVERALL VIEW AND MAJOR COMPONENTS
1
2
4
3
6 |
|
|
5 |
|
|
|
|
7 |
|
|
|
|
16 |
8 |
15 |
|
9 |
||
|
|
||
|
|
|
|
|
|
|
10 |
Fig.1-1 Overall View
2. DIMENSIONS AND SPECIFICATIONS
2-1. DIMENSIONS -mm-
170
|
˚ |
8˚ |
|
50 |
|
1105 |
80˚ |
178 |
410 |
|
|
11 |
(5) |
Seat |
|
12 |
(6) |
Flange |
|
(7) |
Lower Flange Cover |
||
|
|||
13 |
(8) |
Flange Hose Cover |
|
(9) |
Base |
||
14 |
|||
|
(10) Pump Cover |
||
|
(1) |
Headrest |
|
|
(2) |
Backrest |
|
|
(3) |
Back Support |
|
|
(4) Armrest (Left) |
||
7 |
(11) Headrest Rear Cover |
|
|
|
(12) Backrest Rear Cover |
16(13) Back Support Cover
(14)Upper Flange Cover
(15)Main Switch Panel
(16)Foot Control
255 60
630
600
510
225
5˚11˚
565 |
1813 |
1188 |
60 |
610 |
|
||||
|
Fig.2-1 |
Dimensions |
|
|
2-2. SPECIFICATIONS |
|
|
|
|
Seat Initial Height ----------------------------------------------------- |
|
|
410mm |
|
Seat Lifting Stroke----------------------------------------------------- |
|
|
380mm |
|
Backrest Movement---------------------------------------------------- |
|
|
0˚ ~ 80˚ above Horizontal |
|
Tilting Mechanism----------------------------------------------------- |
|
|
Backrest Synchronized Tilting (5˚~11˚aboveHorizontal) |
|
Auto Movements ----------------------------------------------------- |
|
|
2-Preset, 1-Last Position Memory and 1-Auto Return |
|
Control Voltage ----------------------------------------------------- |
|
|
DC.12V |
|
Power Consumption---------------------------------------------------- |
|
|
230V, 50Hz, 2.0A |
|
Weight-------------------------------------------------------------------- |
|
|
115Kg |
|
Maximum Load--------------------------------------------------------- |
|
|
135 kg |
|
Service Life------------------------------------------------------------- |
|
|
10 years |
|
-1B-
Loading...