Beko WTL 12 User manual
Washing Machine
User manual
WTL 12
&/
%PDVNFOU/VNCFS= 9 6
Please read this user manual first!
Dear Customer,
Thank you for prefering an %HNR product. We hope that you get the best results from your product which
has been manufactured with high quality and state-of-the-art technology. Therefore, please read this
entire user manual and all other accompanying documents carefully before using the product and keep
it as a reference for future use. If you handover the product to someone else, give the user manual as
well. Follow all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences between
models will be identified in the manual.
Explanation of symbols
Throughout this user manual the following symbols are used:
Important information or useful hints
C
A
about usage.
Warning for hazardous situations with
regard to life and property.
Warning for electric shock.
B
Packaging materials of the product
are manufactured from recyclable
materials in accordance with our
National Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the
packaging material collection points designated by the local authorities.
This product was manufactured using the latest technology in environmentally friendly conditions.
TABLE OF CONTENTS
1 Important instructions for safety and
environment 4
1.1 General safety . . . . . . . . . . . . . . . . . . . . . . .4
1.2 Intended use . . . . . . . . . . . . . . . . . . . . . . . .5
1.3 Children's safety. . . . . . . . . . . . . . . . . . . . . .5
1.4 Package information. . . . . . . . . . . . . . . . . . .6
1.5 Disposing of the waste product. . . . . . . . . . .6
1.6 Compliance with WEEE Directive . . . . . . . . . .6
2 Your washing machine 7
2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.2 Technical specifications . . . . . . . . . . . . . . . .8
3 Installation 9
3.1 Appropriate installation location. . . . . . . . . . .9
3.2 Connecting water supply. . . . . . . . . . . . . . . .9
3.3 Connecting to the drain. . . . . . . . . . . . . . . .10
3.3.1 Connecting to the drain without pump . . . . . 10
3.3.2 Connecting to the drain with pump. . . . . . . . 11
3.4 Adjusting the feet . . . . . . . . . . . . . . . . . . . .11
3.5 Electrical connection. . . . . . . . . . . . . . . . . .12
3.6 Connection of inlet hose connector and tap 12
3.7 Connecting to the water supply. . . . . . . . . .
3.8 Using detergent /softener and bleach nector 13
3.9 Put rat
into the machin 13
. . . . . . . . . .
13
5 Operating the product 18
5.1 Control panel . . . . . . . . . . . . . . . . . . . . . . .18
5.2 Preparing the machine . . . . . . . . . . . . . . . .19
5.3 Main programmes . . . . . . . . . . . . . . . . . . .20
5.4 Auxiliary function selection . . . . . . . . . . . . .22
6 Maintenance and cleaning 23
6.1 Cleaning the detergent drawer . . . . . . . . . .23
6.2 Cleaning the body and control panel . . . . . .23
6.3 Cleaning the water intake filters . . . . . . . . .23
6.4 Cleaning the fuzz collector
. . . . . . . . . . . . . .24
7 Troubleshooting 25
4 Preparation 14
4.1 Sorting the laundry. . . . . . . . . . . . . . . . . . .14
4.2 Preparing laundry for washing. . . . . . . . . . .15
4.3 Things to be done for energy saving . . . . . . 15
4.4 Correct load capacity . . . . . . . . . . . . . . . . .16
4.5 Loading the laundry . . . . . . . . . . . . . . . . . .16
4.6 Using detergent and softener . . . . . . . . . . .16
4.6.1 Advanced detergent drawer. . . . . . . . . . . . . 17
4.6.2 Simple detergent drawer . . . . . . . . . . . . . . . 17
3 / EN
1 Important instructions for safety and environment
This section contains safety instructions that will help protect from risk of
personal injury or property damage. Failure to follow these instructions shall
void any warranty.
1.1 General safety
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of appliance by a person responsible for their safety.Children must not play
with the product. Cleaning and maintenance works should not be performed by
children unless they are supervised by someone.
• Never place the product on a carpet-covered floor. Otherwise, lack of airflow
beneath the machine will cause electrical parts to overheat. This will cause
problems with your product.
• If the product has a failure, it should not be operated unless it is repaired by
the Authorized Service Agent. There is the risk of electric shock!
• This product is designed to resume operating in the event of powering on after
a power interruption. If you wish to cancel the programme, see "Cancelling the
programme" section.
• Connect the product to a grounded outlet protected by a 6 A fuse. Do not
neglect to have the grounding installation made by a qualified electrician. Our
company shall not be liable for any damages that will arise when the product
is used without grounding in accordance with the local regulations.
•Do not use old or used water inlet hoses on the new product. It may cause
stains on your laundry.
• Never remove the filter while there is still water in the drum. Otherwise, risk of
flooding and injury from hot water will occur.
• Unplug the product when not in use.
• Never wash the product by spreading or pouring water onto it! There is the risk
of electric shock!
• Never touch the plug with wet hands! Never unplug by pulling on the cable,
always pull out by grabbing the plug.
• Use detergents, softeners and supplements suitable for automatic washing
machines only.
• Follow the instructions on the textile tags and on the detergent package.
• The product must be unplugged during installation, maintenance, cleaning and
repairing procedures.
4 / EN
Washing Machine /User’s Manual
Important instructions for safety and environment
Always have the installation and repairing procedures carried out by the
Authorized Service Agent. Manufacturer shall not be held liable
for damages that may arise from procedures carried out by unauthorized
persons.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similary qualified persons in order to avoid a hazard.
Place the product on a rigid, flat and level surface.
Do not place it on a long-pile rug or similar surfaces.
Do not place the product on a high platform or near the edge on a cascaded
surface.
Do not place the product on the power cable.
Never use sponge or scrub materials. These will damage the painted, chrome
plated and plastic surfaces.
1.2 Intended use
This product has been designed for domestic use. It is not suitable for
commercial use and it must not be used out of its intended use.
into gap between this cover and lid!
Please do not put your finger
The product must only be used for washing and rinsing of laundry that are
marked accordingly.
The manufacturer waives any responsibility arisen from incorrect usage or
transportation.
The service life of your product is 10 years. During this period, original spare
parts will be available to operate the appliance properly.
1.3 Children's safety
Packaging materials are dangerous to children. Keep packaging materials in a
safe place away from reach of the children.
Electrical products are dangerous for the children. Keep children away from
the product when it is in use. Do not let them to tamper with the product. Use
child lock to prevent children from intervening with the product.
Washing Machine /User’s Manual
5 / EN
Important instructions for safety and environment
Ř Do not forget to close the lid when leaving the room where the product is
located.
ŘŘStore all detergents and additives in a safe place away from the reach of
the children by closing the cover of the detergent container or sealing the
detergent package.
Children of less than 3 years should be kept away unless continuously
supervised.
1.4 Package information
Ř Packaging materials of the product are manufactured from recyclable
materials in accordance with our National Environment Regulations. Do
not dispose of the packaging materials together with the domestic or other
wastes. Take them to the packaging material collection points designated by
the local authorities.
1.5 Disposing of the waste product
Ř This product has been manufactured with high quality parts and materials
which can be reused and are suitable for recycling. Therefore, do not dispose
the product with normal domestic waste at the end of its service life. Take it
to a collection point for the recycling of electrical and electronic equipment.
Please consult your local authorities to learn the nearest collection point. Help
protect the environment and natural resources by recycling used products. For
children's safety, cut the power cable and break the locking mechanism of the
lid so that it will be non-functional before disposing of the product.
1.6 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU).
This product bears a classification symbol for waste electrical
and electronic equipment (WEEE).
This product has been manufactured with high quality parts
and materials which can be reused and are suitable for
recycling. Do not dispose of the waste product with normal
domestic and other wastes at the end of its service life. Take
it to the collection center for the recycling of electrical and
electronic equipment. Please consult your local authorities to
learn about these collection centers.
Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive (2011/65/
EU). It does not contain harmful and prohibited materials specified in the
Directive.
6 / EN
Washing Machine /User’s Manual
2 Your washing machine
2.1 Overview
1
2
3
4
1- Power cable
2- Loading door
3- Detergent drawer
Washing Machine /User’s Manual
5
6
4- Control panel
5- Drain hose
6- Adjustable feet
7 / EN
Your washing machine
2.2 Technical specifications
Models (EN)
Maximum dry laundry capacity (kg)
Height (cm)
Width (cm)
Depth (cm)
Net weight (±4 kg.)
Electrical input (V/Hz)
Total power (W)
Spin speed (rpm/ min., max.)
Main model code
WTL 12
12
99
60
61.5
43
20 V ~/ 50Hz
400
750
99C
8 / EN
Technical specifications may be changed without prior notice to improve the quality of the product.
Figures in this manual are schematic and may not match the product exactly.
Values stated on the product labels or in the documentation accompanying it are obtained in laboratory
conditions in accordance with the relevant standards. Depending on operational and environmental
conditions of the product, these values may vary.
Washing Machine /User’s Manual
3 Installation
Refer to the nearest Authorised Service Agent for
installation of the product. To make the product
ready for use, review the information in the user
manual and make sure that the electricity, tap
water supply and water drainage systems are
appropriate before calling the Authorized Service
Agent. If they are not, call a qualified technician
and plumber to have any necessary arrangements
carried out.
Preparation of the location and electrical,
tap water and waste water installations
C
B
A
C
at the place of installation is under
customer's responsibility.
WARNING: Installation and electrical
connections of the product must be
carried out by the Authorized Service
Agent. Manufacturer shall not be held
liable for damages that may arise from
procedures carried out by unauthorized
persons.
WARNING: Prior to installation, visually
check if the product has any defects on
it. If so, do not have it installed. Damaged
products cause risks for your safety.
Make sure that the water inlet and
discharge hoses as well as the power
cable are not folded, pinched or crushed
while pushing the product into its place
after installation or cleaning procedures.
3.1 Appropriate installation location
• Place the machine on a rigid floor. Do not place
it on a long pile rug or similar surfaces.
• Place the product on a solid and flat floor that
has sufficient load carrying capacity!
• Do not place the product on the power cable.
• Do not install the product at places where
temperature may fall below 0ºC.
• Place the product at least 1 cm away from the
edges of other furniture.
3.2 Connecting water supply
The water supply pressure required to run
the product is between 1 to 10 bars (0.1
C
C
A
A
1. Connect the special hoses supplied with the
product to the water inlets on the product. Red
hose (left) (max. 90 ºC) is for hot water inlet,
blue hose (right) (max. 25 ºC) is for cold water
inlet.
A
2. Tighten all hose nuts by hand. Never use a tool
when tightening the nuts.
3. Open the taps completely after making the
hose connection to check for water leaks at
the connection points. If any leaks occur, turn
off the tap and remove the nut. Retighten the
nut carefully after checking the seal. To prevent
water leakages and damages caused by them,
keep the taps closed when the machine is not
in use.
– 1 MPa). It is necessary to have 10 – 80
liters of water flowing from the fully open
tap in one minute to have your machine
run smoothly. Attach a pressure reducing
valve if water pressure is higher.
If you are going to use the double waterinlet product as a single
unit, you must install the supplied stopper
to the hot water valve before operating the
product. (Applies for the products supplied
with a blind stopper group.)
WARNING: Models with a single water
inlet should not be connected to the hot
water tap. In such a case the laundry will
get damaged or the product will switch to
protection mode and will not operate.
WARNING: Do not use old or used water
inlet hoses on the new product. It may
cause stains on your laundry.
WARNING: Ensure that the cold and
hot water connections are made correctly
when installing the product. Otherwise,
your laundry will come out hot at the end
of the washing process and wear out.
(cold) water-inlet
Washing Machine /User’s Manual
9 / EN
Loading...