Beko WTA 8716 DSW BTR User manual

Washing Machine

User Manual

Waschmaschine

Bedienungsanleitung

WTA 8716 DSW BTR

EN / DE

Document Number :

2820528505_EN/ 16-04-20.(12:40)

1 General safety instructions

This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.

1.1 Life and property safety

Never place the product on a carpet-covered floor. Otherwise, lack of airflow

beneath the machine will cause electrical parts to overheat. This will cause problems with your product.

Unplug the product if it is not in use.

Always have the installation and repairing procedures carried out by the Authorised Service Agent. The manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons.

The water supply and draining hoses must be securely fastened and remain

undamaged. Otherwise, there is the risk of water leakage.

While there is still water inside the product, never open the loading door or

remove the filter. Otherwise, risk of flooding and injury from hot water will occur.

Do not force open the locked loading door. The door will open immediately

after the washing cycle has ended. If the door does not open, apply the solutions provided for "Loading door cannot be opened." error in the Troubleshooting section. In case of forcing the loading door to open, the door and the lock mechanism may get damaged.

Use detergents, softeners and supplements suitable for automatic washing

machines only.

Follow the instructions on the label of textile products and the detergent package.

The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa).

Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.

This product was manufactured using the latest technology in environmentally friendly conditions.

2 / EN

Washing Machine / User’s Manual

1.2 Children's safety

This product can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out. Children should not play with the product. Cleaning and maintenance works should not be performed by children unless they are supervised by someone. Children under the age of 3 should be kept away unless continuously supervised.

Packaging materials are dangerous for the children. Keep packaging

materials in a safe place away from reach of the children.

Electrical products are dangerous for the children. Keep children away from

the product when it is in use. Do not allow them to play with the product. Use child lock to prevent children from intervening with the product.

Do not forget to close the loading door when leaving the room where the

product is located.

Store all detergents and additives in a safe place away from the reach of

the children by closing the cover of the detergent container or sealing the detergent package.

1.3 Electrical safety

If the product has a failure, it should not be operated unless it is repaired by

the Authorised Service Agent! There is the risk of electric shock!

This product is designed to resume operating in the event of powering

on after a power interruption. If you wish to cancel the programme, see "Cancelling the programme" section.

Plug the product into a grounded outlet protected by a 16 A fuse. Do not

neglect to have the grounding installation made by a qualified electrician. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

Do not wash the product by spraying or pouring water onto it! There is the

risk of electric shock!

3 / EN

Washing Machine / User’s Manual

Never touch the power cable plug with wet hands! Never unplug by pulling

on the cable. Always press on the plug with one hand and pull out the plug by grabbing with the other hand.

Product should be unplugged during installation, maintenance, cleaning

and repair procedures.

If the power cable is damaged, it must be replaced by the manufacturer, authorised service or someone designated by the importer in order

or a similarly qualified person (preferably an electrician)

to avoid possible risks.

1.4 Hot surface safety

The glass of the loading door gets too hot while washing at higher temperatures. Therefore, especially do not allow children touch the loading door glass while washing.

4 / EN

Washing Machine / User’s Manual

2 Important instructions for environment

2.1 Compliance with WEEE Directive

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.

Compliance with RoHS Directive:

The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

2.2 Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Intended use

• This product has been designed for domestic use. It is not for commercial purposes or it should not be used out of its intended use.

• The product must only be used for washing and rinsing of laundry that are marked accordingly.

• The manufacturer waives any responsibility arisen from incorrect usage or transportation.

• The service life of your product is 10 years. During this period, original spare parts will be available to operate the appliance properly.

• This appliance is intended to be used in household and similar applications such as:

– staff kitchen areas in shops, offices and other working environments; – farm houses; – by clients in hotels, motels and other residential type environments; – bed and breakfast type environments; – areas for communal use in blocks of flats or in launderettes.

5 / EN

Washing Machine / User’s Manual

4 Technical specifications

Supplier name or trademark Beko

Model name

Rated capacity (kg) 8 Maximum spin speed (rpm) 1400 Built-in No Height (cm) 84 Width (cm) 60 Depth (cm) 59 Single Water inlet / Double Water inlet

• Available Electrical input (V/Hz) 230 V / 50Hz Total current (A) 10 Total power (W) 2200 Main model code 1311

WTA 8716 DSW BTR

7158445600

• / -

6 / EN

The model information as stored in the product database can be reached by entering following website and searching for your model identifier (*) found

SUPPLIER’S NAME MODEL IDENTIFIER

WARNING: Consumption values are applicable for cases where the wireless network connection is off.

(*)

on energy label.

https://eprel.ec.europa.eu/

Washing Machine / User’s Manual

4.1 Installation

• Apply to the nearest authorised service agent for the installation of your product.

• Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility.

• Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.

• Make sure that the installation and electrical connections of the product are performed by authorised service. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons.

• Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.

4.1.1 Appropriate installation location

• Place the product on a hard and level floor. Do not put it onto a carpet with high pile or other similar surfaces.

• When the washing machine and dryer are placed on top of each other, their total weight –when loaded– amounts to 180 kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity!

• Do not place the product on the power cable.

• Do not install the product in the environments where the temperature falls below 0 ºC.

• Leaving a gap at the sides of the machine is suggested to reduce vibration and noise

• On a graduated floor, do not place the product next to the edge or on a platform.

• Do not place heat sources such as Hobs, Irons, Ovens, etc. on the washing machine and do not use them on the product.

4.1.2 Removing packaging reinforcement (If the product has)

Tilt the machine backwards to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Do not make this operation alone by yourself.

4.1.3 Removing the transportation locks

1 Loosen all bolts with an appropriate wrench until they turn freely. 2 Remove the transport safety bolts by turning them slightly. 3 Insert the plastic covers in the bag containing the user manual to the openings on the rear panel.

CAUTION: Remove the transportation safety bolts before operating the washing machine! Otherwise, the product will be

7 / EN

damaged.

Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.

Install the transport safety bolts in reverse order of the disassembly procedure. Never move the product without the transportation safety bolts properly fixed in place!

Washing Machine / User’s Manual

4.1.4 Connecting water supply

40 cm

100 cm

It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run

smoothly. Attach a pressure reducing valve if water pressure is higher.

CAUTION: Models with a single water inlet should not be connected to the hot water tap. In such a case the laundry will

get damaged or the product will switch to protection mode and will not operate.

1 Tighten the nuts of the hose by hand. Never use a tool when

tightening the nuts.

2 When hose connection is completed, check whether there is leak

problems at the connection points by opening the taps fully. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. In order to prevent the water leaks and resultant damages, keep the taps closed when you do not use the product.

4.1.5 Connecting the drain hose to the drain

• Attach the end of the drain hose directly to waste water drain, lavatory or bathtub.

CAUTION: Your drain house will be flooded if the hose comes out of its housing during water discharge. Moreover, there

is risk of scalding due to high washing temperatures! In order to prevent such situations and make sure that the machine performs water intake and discharge processes without any problem, fix the drain hose securely.

• Connect the drain hose to a minimum height of 40 cm and a maximum height of 100 cm.

• In case the drain hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure.

• To prevent the waste water to go back into the machine again and to ensure easy drainage, do not immerse the end of the hose into the waste water or do not insert it into the drain for more than 15 cm. If it is too long, cut it short.

• The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the machine.

• If the length of the hose is too short, use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.

8 / EN

Washing Machine / User’s Manual

4.1.6 Adjusting the feet

CAUTION: In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced

1 Loosen the lock nuts on the feet by hand. 2 Adjust the feet until the product stands in a stable and balanced way.

3. Tighten all lock nuts by hand again.

4.1.7 Electrical connection

Connect the product to a grounded outlet protected by a 16 A fuse. damages that will arise when the product is used without grounding in accordance with the local regulations.

• Connection must comply with national regulations.

• The wiring for the electrical outlet circuit must be sufficient to meet the appliance requirements. Use of a Groud Fault Circuit Interrupter (GFCI) is recommended.

• Power cable plug must be within easy reach after installation.

• If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16 Amp fuse.

• The voltage specified in the "Technical specifications" section must be equal to your mains voltage.

• Do not make connections via extension cables or multi-plugs.

on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing and vibration problems.

CAUTION: Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.

The Manufacturer shall not be liable for any

4.1.8 Initial use

9 / EN

CAUTION: Damaged power cables must be replaced by the Authorised Service Agents.

Before starting to use the product make sure that the preparations are made which are in line with the “Important Safety and Environment Instructions” and the instructions in the “Installation” section. To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If this program is not available in your machine, apply the method which is described in the section 4.4.2.

Use an anti-limescale suitable for the washing machines.

Some water might have remained in the product due to the quality control processes in the production. It is not harmful for the product.

Washing Machine / User’s Manual

4.2 Preparation

4.2.1 Sorting the laundry

• Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature.

• Always observe the instructions given on the garment care labels.

4.2.2 Preparing laundry for washing

• Laundry items with metal attachments such as, underwiring, belt buckles or metal buttons will damage the machine. Remove the metal pieces or wash such clothes by putting them in a laundry bag or pillow case.

• Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets inside out and brush. Such objects may damage the product or cause noise problem.

• Put small size clothes such as infant's socks and nylon stockings in a laundry bag or pillow case.

• Place curtains in without compressing them. Remove curtain attachment items.

• Fasten zippers, sew loose buttons and mend rips and tears.

• Wash “Machine washable” or “Hand washable” labelled products only with an appropriate programme.

• Do not wash colours and whites together. New, dark coloured cottons release a lot of dye. Wash them separately.

• Tough stains must be treated properly before washing.

• Only use the dyes / colour changers and descaling agents which are appropriate for machine wash. Always follow the instructions on the package.

• Wash trousers and delicate laundry turned inside out.

• Keep laundry items made of Angora wool in a plastic bag in the freezer for a few hours before washing. This can reduce piling.

• Laundry that are subjected to materials such as flour, lime dust, milk powder, etc. intensely must be shaken off before placing into the product. Such dusts and powders on the laundry may build up on the inner parts of the product in time and can cause damage.

4.2.3 Tips for energy and water saving

Following information will help you use the product in an ecological and energy/water-efficient manner.

• Operate the product in the highest load capacity allowed for the programme you have selected, but do not overload. See, "Programme and consumption table".

• Observe the temperature instructions on the detergent packaging.

• Wash slightly soiled laundry at low temperatures.

• Use faster programmes for small quantities of lightly soiled laundry.

• Do not use prewash and high temperatures for laundry that is not heavily soiled or stained.

• If you plan to dry your laundry in a dryer, select the highest spin speed recommended during washing process.

• Do not use more detergent than the recommended on the detergent packaging.

4.2.4 Loading the laundry

1. Open the loading door.

2. Put the laundry items into the product in a loose manner.

3 Push the loading door to close until you hear a locking sound. Ensure that no items are caught in the door.

The loading door is locked while a programme is running. The door lock will open immediately after the washing programme has ended. Then you can open the loading door. If the door does not open, apply the solutions provided for "Loading door cannot be opened." error in the Troubleshooting section.

4.2.5 Correct load capacity

The maximum load capacity depends on the type of laundry, the degree of soiling and the desired washing programme. The machine automatically adjusts the water amount according to the weight of the laundry put inside it.

10 / EN

WARNING: Comply with the information in the section "Programme and consumption table". When overloaded,

product's washing performance will drop. Moreover, noise and vibration problems may occur.

Washing Machine / User’s Manual

4.2.6 Using detergent and softener

When using detergent, softener, starch, fabric dye, bleach and descaling agents; read the manufacturer's instructions written

Detergent, softener and other cleaning agents

• Add detergent and softener before starting the washing programme.

• While the washing cycle is in progress, do not leave the detergent drawer open!

• When using a programme without prewash, do not put any detergent into the prewash compartment (compartment no. "1").

• In a programme with prewash, do not put liquid detergent into the prewash compartment (compartment no. "1").

• Do not select a programme with prewash if you are using a detergent bag or dispensing ball. Place the detergent bag or the dispensing ball directly among the laundry in the product.

• If you are using liquid detergent, do not forget to place the liquid detergent container into the main wash compartment (compartment no. “2”).

Choosing the detergent type

Detergent type to be used depends on the washing programme, fabric type and colour.

• Use different detergents for coloured and white laundry.

• Wash your delicate clothes only with special detergents (liquid detergent, wool shampoo, etc.) intended solely for delicate clothes and at suggested programmes.

• When washing dark coloured clothes and quilts, it is recommended to use liquid detergent.

• Wash woollens at suggested programme with special detergent made specifically for woollens

• Please review the programme descriptions part for suggested programme for different textiles.

• All recommendations about detergents are valid for selectable temperature range of programmes.

Adjusting detergent amount

The amount of washing detergent to be used depends on the amount of laundry, the degree of soiling and water hardness.

• Do not use amounts exceeding the dosage quantities recommended on the detergent package to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental protection.

• Use less detergent for small loads, lightly soiled clothes and short duration programmes, especially in soft water areas.

Using softeners

Pour the softener into the softener compartment of the detergent drawer.

• Do not exceed the (>max<) level sign on the softener compartment.

• If the softener has lost its fluidity, dilute it with water before adding it in the detergent compartment.

Using liquid detergents If the product contains a liquid detergent cup:

• Put the liquid detergent container into the compartment no “2”.

• If the liquid detergent lost its fluidity, dilute it with water before putting it into the detergent container.

on the package and follow the dosages specified. Use measuring cup if available.

WARNING: Use only detergents manufactured specifically for washing machines. WARNING: Do not use soap powder.

WARNING: Do not use liquid detergents or other cleaning products other than fabric softeners produced for washing

machines to soften the clothes.

The detergent drawer is composed of three compartments: – (1) for prewash – (2) for main wash – (3) for softener – ( ) in addition, there is a siphon piece in the softener compartment.

11 / EN

Washing Machine / User’s Manual

If the product is equipped with a liquid detergent part:

• When you want to use liquid detergent, pull the apparatus towards yourself. The part that falls down will serve as a barrier for the liquid detergent. If required, clean the apparatus with water when it is in place or by removing it. If you will use powder detergent, the apparatus must be secured at top position.

If the product does not contain a liquid detergent cup:

• Do not use liquid detergent for the prewash in a programme with prewash.

• Liquid detergent stains your clothes when used with "End Time" function that delays start time. If you are going to use the End Time function, do not use liquid detergent.

Using gel and tablet detergent

• If the gel detergent thickness is fluidal and your product does not contain a special liquid detergent container, put the gel detergent into the main wash detergent compartment during first water intake. If your product contains a liquid detergent container, fill the detergent into this container before starting the programme.

• If the gel detergent thickness is not fluidal or in the shape of capsule liquid tablet, put it directly into the drum before washing.

• Put tablet detergents into the main wash compartment (compartment no. "2") or directly into the drum before washing.

Using starch

• Add liquid starch, powder starch or the dyestuff into the softener compartment.

• Do not use softener and starch together in a washing cycle.

• Wipe the inside of the product with a damp and clean cloth after using starch.

Using limescale remover

• When required, use limescale removers manufactured specifically for washing machines only.

Using bleaches

• Select a programme with prewash and add the bleach at the beginning of the prewash. Do not put detergent in the prewash compartment. As an alternative application, select a programme with extra rinse and add the bleach while the product is taking water from the detergent compartment during first rinsing step.

• Do not use bleach and detergent by mixing them.

• Use just a little amount (approx. 50 ml) of bleach and rinse the clothes very well as it causes skin irritation.

• Do not pour the bleach onto the laundry.

• Do not use it with the coloured items.

• When using an oxygen-based bleach, select a programme which washes the laundry at a low temperature.

• Oxygen-based bleach can be used together with the detergent. However, if its thickness is not the same with the detergent, put the detergent first into the compartment no. "2" in the detergent drawer and wait until the detergent flows while the product is taking in water. While the product continues taking in water, add bleach in the same compartment.

12 / EN

Washing Machine / User’s Manual

4.2.7 Tips for efficient washing

Symbols Table

Clothes

Heavily Soiled

(difficult stains such as grass, coffee, fruits and blood.)

Normally Soiled

Soiling Level

(For example, stains caused by body on collars and cuffs)

Lightly Soiled

(No visible stains exist.)

Light Colours and

Whites

(Recommended temperature range based on soiling level: 40-90°C)

It may be necessary to pre-treat the stains or perform prewash. Powder and liquid detergents recommended for whites can be used at dosages recommended for heavily soiled clothes. It is recommended to use powder detergents to clean clay and soil stains and the stains that are sensitive to bleaches.

Powder and liquid detergents recommended for whites can be used at dosages recommended for normally soiled clothes.

Powder and liquid detergents recommended for whites can be used at dosages recommended for lightly soiled clothes.

Colours

(Recommended temperature range based on soiling level: cold -40°C)

Powder and liquid detergents recommended for colours can be used at dosages recommended for heavily soiled clothes. It is recommended to use powder detergents to clean clay and soil stains and the stains that are sensitive to bleaches. Detergents which do not contain bleach should be used.

Powder and liquid detergents recommended for colours can be used at dosages recommended for normally soiled clothes. Detergents which do not contain bleach should be used.

Powder and liquid detergents recommended for colours can be used at dosages recommended for lightly soiled clothes. Detergents which do not contain bleach should be used.

Black/Dark

Colours

(Recommended temperature range based on soiling level: cold -40°C)

Liquid detergents suitable for colours and dark colours can be used at dosages recommended for heavily soiled clothes.

Liquid detergents suitable for colours and dark colours can be used at dosages recommended for normally soiled clothes.

Liquid detergents suitable for colours and dark colours can be used at dosages recommended for lightly soiled clothes.

Delicates/

Woollens/Silks

(Recommended temperature range based on soiling level: cold-30°C)

Prefer liquid detergents produced for delicate clothes. Woollen and silk clothes must be washed with special woollen detergents.

4.2.8 Displayed Programme Time

You can see the programme duration on the display of your machine while selecting a programme. Depending on the amount of laundry you have loaded into your machine, foaming, unbalanced load conditions, fluctuations in power supply, water pressure and programme settings, the programme duration is automatically adjusted while the programme is running. SPECIAL CASE: At programme start of Cottons and Cotton Eco programmes, display shows the duration of half load, which is the most common use case. After programme starts, in 20-25 minutes actual load is detected by the machine. And if the detected load is higher than half load; washing programme will be adjusted accordingly and programme duration increased automatically. You may follow this change on the display.

13 / EN

Prewash Fast Fast+ Extra

Rinse

Spin+Drain

Wash

(End)

Rinse

Drain

Temperature Door

AntiCrease+ Iron

Cancel

Extra

Water

Spin No

Drying

Anti

Crease

Spin

Extra

Dry

Pet Hair Removal

Tap Water (Cold)

Cupboard

Night Modu

Time Delay

Timed Drying

Soaking

Lock

Child Lock

Hold

On/Off Start /

Steeping

Pause

AutoDose

Detergent Selection

Soil Level Add

Liquid

Garment

Softener

Selection

Downloaded

Program

Steam

Water

Dry

Rinse

Washing Machine / User’s Manual

4.3 Operating the product

a b c d e

4.3.1 Control panel

1 2 3 4

79 8101112

6 5

1 - Programme Selection knob 2 - Temperature level lights 3 - Spin level indicator lights 4 - Display 5 - Start / Pause button 6 - Remote Control button.

4.3.2 Display symbols

1200

1000

800

600

a- Temperature indicator b- Spin speed indicator c- Duration information d - Door lock is engaged symbol e- Programme follow-up indicator f- No Water indicator g - Add Garment indicator h- Bluetooth Connection indicator i- Remote Control indicator

7 - End Time Setting button 8 - Auxiliary Function button 3 9 - Auxiliary Function button 2 10 - Auxiliary Function button 1 11 - Spin speed adjustment button 12 - Temperature adjustment button

ikl jno mpr

j - Delayed Start Enabled indicator k - Auxiliary Function indicators 3 l- Child Lock is Engaged symbol m- Auxiliary Function indicators 2 n- Auxiliary Function indicators 1 o- No Spin Indicator p- Rinse Hold Indicator r- Cold Water indicator

14 / EN

The visuals used for machine description in this section are schematic and may not match exactly with the features of your machine.

Washing Machine / User’s Manual

4.3.3 Programme and consumption table

EN Auxiliary functions

Programme

Algodón

Eco 40-60

Sintéticos

Rápido 28’/14’

Rápido 28’/14’ + Fast+ Lana Delicados R. oscura

Sport

Manchas PRO Hygiene+ Plumíferos Camisas Drum Clean

Mix Curtain Lingerie Soft Toys Towel

Max. Load (kg)

Water

Consumption (l)

Energy

Consumption (kWh)

Max. Speed

Fast+

Prewash

Pet Hair Removal

90 8 95 2,40 60 8 95 1,80 40 8 93 0,97

40 *** 8 54,0 1,019

40 **,*** 4 39,5 0,579

40 *** 2 28,0 0,227

60 ** 8 53,0 1,022 60 ** 4 38,4 0,610

60 3 71 1,35 1200 • • • • • 40 3 67 0,85 1200 • • • • • 90 8 66 2,20 1400 • • • 60 8 66 1,20 1400 • • • 30 8 66 0,20 1400 • • • 30 2 40 0,15 1400 • • • 40 1,5 55 0,50 1200 40 3,5 55 0,72 800 40 3,5 83 0,85 1200 • • • • • 40 3,5 55 0,50 1200 • 60 4 80 1,70 90 8 125 2,90 60 2 89 1,30 1000 • 60 3 63 1,23 90 - 73 2,60 600 *

Programa descargado *****

40 3,5 83 0,90 800 • • • • 40 2 86 0,70 800 • 30 1 70 0,30 600 40 1 55 0,50 600 60 1 75 1,20 1000 •

• • • • •

1400

• • • • •

1400

• • • • •

1400 1400 40-60 1400 40-60 1400 40-60 1400 40-60 1400 40-60

• •

1400 1400

• • • • •

800

Steam

Temperature

Anti-Crease+

Cold - 90 Cold - 90 Cold - 90

Cold - 60 Cold - 60 Cold - 90 Cold - 90 Cold - 90 Cold - 90 Cold - 40 Cold - 40 Cold - 40 Cold - 40

30-60

20-90 Cold - 60 Cold - 60

Cold - 40 Cold - 40 Cold - 30 Cold - 40 Cold - 60

• : Selectable. * : Automatically selected, cannot be cancelled. ** : Eco 40-60 ( ) is the test programme in accordance with EN 60456:2016 and energy label with Commission

Delegated Regulation (EU) 1061/2010)

*** : Eco 40-60 with 40 °C temperature selection is the test programme in accordance with EN 60456:2016/prA:2019 and

energy label with Commission Delegated Regulation (EU) 2019/2014

***** : These programmes can be used with the HomeWhiz application. Energy consumption may increase with connection.

- : See the programme description for maximum load.

15 / EN

Washing Machine / User’s Manual

The auxiliary functions in the table may vary according to the model of your machine.

Consumption Values (EN)

Eco 40-60

Algodón 20 1400 8 03:40 0,600 93,00 20 53 Algodón 60 1400 8 03:40 1,800 95,00 60 53 Sintéticos 40 1200 3 02:25 0,850 67,00 40 40 Rápido 28’/14’ 30 1400 8 00:28 0,200 66,00 23 62

Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.

You can see the washing duration on the display of your machine while selecting a programme. Depending on the amount of laundry you have loaded into your machine, there may be a difference of 1-1.5 hours between the duration shown on the display and the actual duration of the wash cycle. Duration will be automatically updated soon after the washing starts.

"Selection patterns for auxiliary functions can be changed by the manufacturer company. New selection patterns can be added or removed." "The spin speed of your machine may vary according to the programme; this spin speed cannot exceed the max. spin speed of your machine."

Always select the lowest appropriate temperature. The most efficient programmes in terms of energy consumption are generally those that perform at lower temperatures and longer duration.

Noise and remaining moisture content are influenced by the spinning speed: the higher the spinning speed in the spinning phase, the higher the noise and the lower the remaining moisture content.

Temperature

Selection (°C)

40 1400 8,0 03:38 40 1400 4 02:47 40 1400 2 02:47

Spin Speed (rpm)

Capacity (kg)

Program Duration

(hh:mm)

1,019 54,00 0,579 39,50 0,227 28,00

Energy Consumption

(kWh/cycle)

Water

Consumption(L/

cycle)

Laundry

40 53 34 53 22 53

Temperature (°C)

Remaining Moisture

Content (%)

4.3.4 Programme selection

1 Determine the programme suitable for the type, quantity and soiling level of the laundry in accordance with

"Programme and consumption table".

Programmes are limited with the highest spin speed appropriate for that particular type of fabric.

When selecting a programme, always consider the type of fabric, colour, degree of soiling and permissible water temperature.

2 Select the desired programme with the Programme Selection knob.

4.3.5 Programmes

• Eco 40-60

The Eco 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle, and that this programme is used to assess the compliance with the EU ecodesign legislation. Although it washes longer than all other programmes, it provides high energy and water savings. Actual water temperature may be different from the stated wash temperature. When you load the machine with less laundry (e.g. ½ capacity or less), periods in programme stages may automatically get shorter. In this case, energy and water consumption will decrease.

16 / EN

Washing Machine / User’s Manual

• Algodón (Cottons)

You can wash your durable cotton laundry (sheets, bedlinen, towels, bathrobes, underwear etc.) in this programme. When the quick wash function button is pressed, programme duration becomes notably shorter but effective washing performance is ensured with intense washing movements. If the quick wash function is not selected, superior washing and rinsing performance is ensured for your heavily soiled laundry.

• Sintéticos (Synthetics)

You can wash your laundry (such as shirts, blouses, synthetic/cotton blended fabrics etc.) in this programme. The programme duration gets notable shorter and washing with high performance is ensured. If the quick wash function is not selected, superior washing and rinsing performance is ensured for your heavily soiled laundry.

• Lana (Woollens / Hand Wash)

Use to wash your woollen/delicate laundry. Select the appropriate temperature complying with the tag of your clothes. Your laundry will be washed with a very gentle washing action in order not to damage the clothes.

• Hygiene+

Applying a steam step at the beginning of the programme allows to soften the dirt easily. Use this programme for your laundry (baby clothes, bed sheets, bedlinen, underwear, etc. cotton items) that requires an anti-allergic and hygienic washing at high temperature with intensive and long washing cycle. The high level of hygiene is ensured thanks to the steam application before the programme, long heating duration and additional rinsing step.

• Programme was tested by „The British Allergy Foundation„ (Allergy UK) with the 60°C temperature option selected and it was certified in terms of its efficacy in eliminating allergens in addition to bacteria and mould.

Allergy UK is the brand of the British Allergy Association. Seal of Approval is created to guide people that require recommendation about a product that the related product restricts / reduces / eliminates the allergens or reduces the allergen content significantly in the ambient where allergy patients exist. It aims to provide assurance that the products are tested scientifically or examined in a way to provide measurable results.

• Plumíferos (Down Wear)

Use this programme to wash your coats, vest, jackets etc. containing feathers with a "machine-washable" label on them. Thanks to special spinning profiles, it is ensured that the water reaches the air gaps amongst the feathers.

• Spin+Drain

You can use this function to remove the water on the garment of drain the water in the machine.

• Aclarado (Rinse)

Use when you want to rinse or starch separately.

•

Curtain

You can use this programme to wash your tulles and curtains. As their meshed texture causes excessive foaming, put little amount of detergent into the main wash compartment. Thanks to the special spin profile of the programme, tulles and curtains crease lesser. Do not load your curtains above the specified capacity in order not to damage them.

It is recommended to use special detergents produced for curtains in the powder detergent compartment in this programme.

• Camisas (Shirts)

This programme is used to wash the shirts made from cotton, synthetic and synthetic blended fabrics altogether. It reduces wrinkles. When the quick wash function is selected, the Pre-treatment algorithm is executed.

• Apply the pre-treatment chemical on your garments directly or add it together with the detergent when the machine starts to take water in the powder detergent compartment. Thus, you can obtain the same performance as you obtain with normal washing in a much shorter period of time. Usage life of your shirts increases.

17 / EN

Washing Machine / User’s Manual

• Rápido 28’/14’

Use this programme to wash your lightly soiled or unspotted cotton clothes in a short time. The programme duration can be reduced down to 14 minutes when the quick wash function is selected. When the quick wash function is selected, maximum 2 (two) kg of laundry must be washed.

• R. oscura (Dark Care / Jeans)

Use this programme to protect the colour of your dark-coloured garments or jeans. It performs high performance washing with special drum movement even if the temperature is low. It is recommended to use liquid detergent or woollen shampoo for dark coloured laundry. Do not wash your delicate clothes containing wool or etc.

• Mix

Use to wash your cotton and synthetic clothes together without sorting them.

• Delicados (Gentle Care)

You can wash your delicate clothes such as cotton/synthetic blended knitwear or hosiery in this programme. It washes with more delicate washing action. Wash your clothes whose colour you want to preserve either at 20 degrees or by selecting the cold wash option.

• Lingerie

You can use this programme to wash delicate garments that are suitable for hand wash and delicate women's underwear. Small amount of garments must be washed in a washing net. Hooks, buttons etc. must be done up and zips must be zipped up.

• Sport (Outdoor / Sport)

You can use this programme to wash sports and outdoors garments that contain cotton/synthetics mix and water repellent covers such as gore-tex etc. It makes sure your garments are washed gently thanks to special rotating movements.

• Manchas PRO (StainExpert)

The machine has a special stain programme which enables the removal of different types of stains in the most effective way. Use this programme only for durable colourfast cotton laundry. Do not wash delicate and pigmenting clothes and laundry in this programme. Before washing, garment tags should be checked (recommended for cotton shirts, trousers, shorts, t-shirts, baby clothes, pyjamas, aprons, table clothes, bed sheets, duvet covers, pillowcases, bath-beach towels, towels, socks, cotton underwear that are suitable for washing at high temperature and long time). You can use automatic stain programme to wash 24 types of stains divided into three different groups that can be selected with the “Quick Wash” setting button. Below you can find the soil groups that can be selected with the “Quick Wash” setting button. Depending on the selected stain group, a special washing programme for which duration of rinse hold, washing action, washing and rinsing duration are modified. Below you can find the soil groups that can be selected with the “Quick Wash” setting button:

When “Quick Wash” is not

selected

Sweat Blood Collar soil Chocolate Meal Pudding Mayonnaise Grass Salad dressing Mud Make-up Egg Machine oil Butter Baby food Curry

When the “Quick Wash” button

is pressed once

When the “Quick Wash” button

is pressed twice

Tea Coffee Fruit juice Ketchup Red wine Starch Jam Coal

• Select the stain programme.

• Select the stain you want to clean by locating it in the groups above and selecting the related group with the quick auxiliary function button.

• Read the garment tag carefully and ensure that correct temperature and spin speed are selected.

18 / EN

Washing Machine / User’s Manual

• Programa descargado (Downloaded Program)

This is a special programme that allows you to download different programmes when you want to. At the start, there is a programme you can see with the HomeWhiz application as default. However, you can use the HomeWhiz application to select a programme from the predetermined programme set, and then change and use it.

If you want to use HomeWhiz feature and Remote Control function, you must select Downloaded Programme. Detailed

• Soft Toys

Soft toys must be washed in a delicate programme due to their delicate fabrics, and the fibre and accessories they contain. Thanks to its delicate washing movements and spinning profile, the soft toys programme protects the toys during washing. It is recommended to use liquid detergent.

• Towel

Use this programme to wash durable cotton laundry such as towels. Load the towels into the machine paying attention to place them in a way that they will not contact the bellow or the glass.

information can be found in 4.3.15 HomeWhiz Feature and Remote Control Function.

Fragile toys with hard surfaces must not be washed under any circumstances.

Toys must not be washed together with your garments since they may harm laundry.

4.3.6 Temperature selection

Whenever a new programme is selected, the recommended temperature for the programme appears on the temperature indicator. It is possible that the recommended temperature value is not the maximum temperature that can be selected for the current programme. Press the Temperature Adjustment button to change the temperature. Temperature decreases gradually.

No change can be made in programmes where temperature adjustment is not allowed.

You can also change the temperature after the washing starts. This change can be made if the washing steps allow it. Changes cannot be made if the steps do not allow it.

If you scroll to cold wash option and press Temperature Adjustment button again, the recommended maximum temperature for the selected programme appears on the display. Press the Temperature Adjustment button again to decrease the

4.3.7 Spin speed selection

Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the Spin Speed indicator.

Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases gradually. Then, depending on the model of the product, "Rinse Hold If you are not going to unload your laundry immediately after the programme completes, you can use Rinse Hold function in order to prevent them from getting wrinkled when there is no water in the machine. This function holds the laundry in the final rinsing water.

19 / EN

temperature.

It is possible that the recommended spin speed value is not the maximum spin speed that can be selected for the current programme.

" and "No Spin " options appear on the display.

Washing Machine / User’s Manual

If you want to spin your laundry after the Rinse Hold function:

- Adjust the Spin Speed.

- Press Start / Pause / Cancel. The programme will resume. Machine drains the water and spins the laundry. If you want to drain the water at the end of the programme without spinning, use No Spin function.

No change can be made in programmes where spin speed adjustment is not allowed.

You can change the spin speed after the washing starts if the washing steps allow it. Changes cannot be made if the steps do not allow it.

Rinse hold

If you are not going to unload your clothes immediately after the programme completes, you can use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine. Press Start / Pause button after this process if you want to drain the water without spinning your laundry. Programme will resume and complete after draining the water. If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button. The programme will resume. Water is drained, laundry is spun and the programme is completed.

4.3.8 Auxiliary function selection

Select the desired auxiliary functions before starting the programme. Whenever a programme is selected, icons of the auxiliary function symbol that is selected together with it illuminates.

When an auxiliary function button that cannot be selected with the current programme is pressed, the washing machine will

Also the frames of the auxiliary function selected for the current programme after the washing has started remains illuminated.

4.3.8.1 Auxiliary functions

• Prewash

A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water, detergent and time.

make a warning sound.

Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before starting the machine, the function selected first will be cancelled and the second auxiliary function selection will remain active. For example, if you want to select Quick Wash after you have selected the Additional Water, Additional Water will be cancelled and Quick Wash will remain active.

An auxiliary function that is not compatible with the programme cannot be selected. (See "Programme and consumption table") Some programmes have auxiliary functions that must be operated simultaneously. Those functions cannot be cancelled. The

frame of the auxiliary function will not be illuminated, only inner area will be illuminated.

• Fast+

After selecting a programme, you can press the Quick Wash setting key to shorten the programme duration. For some programmes, the duration can shorten by over 50%. Despite this, the washing performance is good thanks to the changed algorithm. Although it varies in each programme, when you press the Quick Wash key once, the programme duration decreases to a certain level, and when you press the same key for the second time, it drops to the minimum level. For a better washing performance, do not use the Quick Wash setting key when washing heavily soiled laundry. Shorten the programme duration by using the Quick Wash key for Moderately and Slightly soiled laundry.

20 / EN

Washing Machine / User’s Manual

• Steam

Use this programme to reduce the creases and ironing times of a small amount of unspotted cotton, synthetic or mixed laundry.

When you activate the steam function, do not use liquid detergent if the product does not have a liquid detergent cup or liquid

• Remote Control

You can use this auxiliary function key to connect your product to smart devices. For detailed information, see

4.3.15 HomeWhiz Feature and Remote Control Function.

• Customized Programme

This auxiliary function can only be used for Cotton and Synthetics programmes together with the HomeWhiz application. When this auxiliary function is activated, you can add up to 4 auxiliary rinsing steps to the programme. You can select and use some auxiliary functions even though they are not found on your product. You can increase and decrease the time of the Cottons and Synthetics programmes within a safe range.

4.3.8.2 Functions/Programmes Selected by Pressing the Function Keys for 3 Seconds

• Drum Clean

Press and hold the auxiliary function button 1 for 3 seconds to select the programme. Use regularly (once in every 1-2 months) to clean the drum and provide the required hygiene. Steam is applied before the programme to soften the residues in the drum. Operate the programme while the machine is completely empty. To obtain better results, put powder lime-scale remover for washing machines into the detergent compartment no. „2“. When the programme is over, leave the loading door ajar so that the inside of the machine gets dry.

dosing function. Otherwise, stains might remain on the clothes.

When the Customized Programme auxiliary function is selected, the washing performance and energy consumption will be different than the declared value.

This is not a washing programme. It is a maintenance programme. Do not run the programme when there is something in the machine. If you try to do so, the machine detects that there is

load inside and aborts the programme.

• Anti-Crease+

This function is selected when the spin selection button is pressed and held for 3 seconds and the programme follow-up light for the relevant step turns on. When the function is selected, the drum rotates for up to 8 hours for preventing the laundry from creasing at the end of the programme. You can cancel the programme and take your laundry out at any time during the 8-hour duration. Press the function selection key or the machine on/off key to cancel the function. The programme follow-up light will remain on until the function is cancelled or the step is complete. If the function is not cancelled, it will be active in the subsequent washing cycles as well.

• Pet Hair Removal

This function is selected when the auxiliary function button 2 is pressed and held for 3 seconds. This function helps to remove pet hair that remain on your garments more effectively. When you select this function, Prewash and Extra Rinse steps are added to the normal programme. Thus, washing is performed with more water and the pet hair is removed more effectively.

• Child lock

Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes in a running programme.

You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on the machine

21 / EN

again, programme will resume from where it has stopped.

When the Child Lock is enabled, an audio warning will be given if the buttons are pressed. Audio warning will be cancelled if the buttons are pressed five times consecutively.

Washing Machine / User’s Manual

To activate the Child Lock: Press and hold Auxiliary Function button 3 for 3 seconds. After the countdown as “3-2-1" on the display is over, child lock symbol appears on the display. When this warning is displayed, you can release the Auxiliary Function button 3. To deactivate the Child Lock: Press and hold Auxiliary Function button 3 for 3 seconds. After the countdown as “3-2-1" on the display

is over, child lock symbol disappears.

• Bluetooth 3’’

You can use the bluetooth connection function to pair your machine with your smart device. This way, you can use your smart device to get information about your machine and control it.

To activate bluetooth connection: Press and hold Remote Control function button for 3 seconds. Countdown “3-2-1” will be displayed,

and then Bluetooth icon will appear on the display. Release Remote Control function button. The bluetooth icon will flash while the product is pairing with smart device. If connection is successful, icon will remain on.

To deactivate bluetooth connection: Press and hold Remote Control function button for 3 seconds. Countdown “3-2-1” will be displayed,

and then Bluetooth icon will disappears on the display.

First setup of the HomeWhiz application must be complete for the bluetooth connection to be activated. After setup, pressing the remote control function button while the knob is at Download Programme/Remote Control position will automatically

4.3.9 End Time

Time display

Remaining time for the completion of the programme while it is running is displayed as “01:30” in hours and minutes format.

With the End Time function, the startup of the programme may be delayed up to 24 hours. After pressing End Time button, the programme's estimated ending time is displayed. If the End Time is set, End Time indicator

is illuminated.

activate the bluetooth connection.

Programme time may differ from the values in section "Programme and consumption table" depending on the water pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected and the changes at the mains voltage.

In order for the End Time function is activated and the programme is completed at the end of the specified time, you must press Start/Pause button after adjusting the time.

If you want to cancel End Time function, turn the knob to on and off position. machine.

When you have activated the End Time function, do not add liquid detergent in the powder detergent compartment no 2.

1 Open the loading door, place the laundry and put detergent, etc. 2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions. 3 Set the end time of your choice by pressing the End Time button. End Time indicator illuminates.

22 / EN

There is the risk of staining of the clothes.

Washing Machine / User’s Manual

4 Press Start / Pause button. Time countdown starts. “:” sign in the middle of the end time on the display

starts flashing.

Additional laundry can be added into the machine during the End Time countdown. At the end of the countdown, End Time

4.3.10 Starting the programme

1 Press Start / Pause button to start the programme. 2 The Start / Pause button's light which was off before starts to illuminate steadily now, indicating that the

programme has started.

3 Loading door is locked. The door lock symbol appears on the display after the loading door is locked.

4 Programme follow-up indicator lights on the display will show the current programme step.

4.3.11 Loading door lock

There is a locking system on the loading door of the machine that prevents opening of the loading door in cases when the water level is unsuitable. "Door Locked" symbol appears on the display when the loading door is locked.

indicator turns off, washing cycle starts and the time of the selected programme appears on the display. When the End Time selection is completed, the time appears on the screen consists of end time plus the duration of the

selected programme.

If the Remote Control Function is selected, the door will be locked. In order to open the door you must deactivate Remote

Opening the loading door in case of power failure:

23 / EN

Start Function by either pressing the Remote Start button or changing the programme position.

In case of a power failure, you can use the loading door emergency handle under the pump filter lid to manually open the loading door.

WARNING: Before opening the loading door, make sure that there is no water in the machine to avoid flooding. Water

may be hot and could cause scalding.

• Turn off and unplug the appliance.

• Open the pump filter lid.

Washing Machine / User’s Manual

• Remove the loading door emergency handle behind the filter cover with

a tool.

• Open the loading door by pulling the loading door emergency handle

downwards.

• Try to pull the handle downwards again if the loading door is not opened.

• Bring the loading door emergency handle to its original position after

opening the loading door.

4.3.12 Changing the selections after programme has started

Adding laundry after the programme has started : If the water level in the machine is suitable when you press Start/Pause button, the door lock will be

deactivated and the door will open, allowing you to add garments. The door lock icon on the display goes off when the door lock is deactivated. After adding garments, close the door and press Start/Pause button once again to resume the washing cycle.

If the water level in the machine is not suitable when you press Start/Pause button, the door lock cannot be deactivated and the door lock icon on the display remains on.

If the temperature of the water inside the machine is above 50°C, you cannot deactivate the door lock for safety reasons,

Switching the machine to pause mode: Press the Start/Pause button to switch the machine to pause mode. Pause symbol will flash on the display.

Changing the programme selection after programme has started:

The programme change is allowed when the current programme is running unless the Child Lock is enabled. This action will cancel the current programme.

even if the water level is suitable.

The selected programme starts anew.

24 / EN

Washing Machine / User’s Manual

+ 56 hidden pages