Beko WTA 7612 XSW User manual [EN,DE,FR]

Washing Machine

User’s Manual

Waschmaschine

Bedienungsanleitung

Lave-linge

Manuel d‘utilisation

EN / DE / FR

Document Number=

WTA 7612 XSW

2820527077_EN/ 31-08-18.(14:10)

1 General safety instructions

This section includes security
instructions which may help prevent
the injuries and material damage risks.
All kinds of warranties shall be invalid if
these instructions are not observed.

1.1 Lfe and property safety

CAUTION!

A

• Never place the product on a
carpet-covered floor. Electrical
parts will get overheated since
air cannot circulate from under
the device. This will cause
problems with your product.

• Unplug the product if it is not in
use.

• Always have the installation and
repairing procedures carried
out by the Authorised Service
Agent. The manufacturer shall
not be held liable for damages
that may arise from procedures
carried out by unauthorised
persons.

• The water supply and
draining hoses must be
securely fastened and remain
undamaged. Otherwise, water
leak may occur.

1.2 Hot surface safety

• While there is still water inside
the product, never open the
loading door or remove the filter.
Otherwise, risk of flooding and
injury from hot water will occur.

• Do not force open the locked
loading door. Door can be
opened a few minutes after the
washing cycle ends. In case
of forcing the loading door to
open, the door and the lock
mechanism may get damaged.

• Use detergents, softeners
and supplements suitable for
automatic washing machines
only.

• Follow the instructions on
the label of textiles and the
detergent package.

A

• While washing the laundry
at high temperatures, the
loading door glass will get hot.
Considering this fact, during
washing operation keep the
children away from the loading
door of the product to prevent
them touching it.

CAUTION!

This product was manufactured using the latest technology in environmentally friendly conditions.

1.3 Chldren’s safety

A

• This product can be used by

• Packaging materials may be

• Electrical products are

CAUTION!

the children who are at the
age of 8 and over and the
people whose physical, sensory
or mental skills are not fully
developed or who do not have
necessary required experience
and knowledge as long as they
are supervised or trained about
the safe use of the product and
its risks. Children should not
play with the device. Cleaning
and maintenance works should
not be performed by children
unless they are supervised by
someone. Children of less than
3 years should be kept away
unless continuously supervised.

CAUTION!

A

dangerous for the children.
Keep packaging materials in a
safe place away from reach of
the children.

dangerous for the children.
Keep the children away from
the product when it is in use.
Do not allow them to play
with the product. Use child
lock to prevent children from
intervening with the product.

CAUTION!

A

• Do not forget to close the
loading door when leaving the
room where the product is
located.

• Store all detergents and
additives in a safe place away
from the reach of the children
by closing the cover of the
detergent container or sealing
the detergent package.

1.4 Electrcal safety

B

• If the product has a failure, it

• This product is designed to

DANGER!

should not be operated unless
it is repaired by the Authorised
Service Agent. Risk of electric
shock!

resume operating in the event
of powering on after a power
interruption. If you wish to
cancel the programme, see
“Cancelling the programme”
section.

3 / EN

Washing Machine / User’s Manual

B

DANGER!

• Plug the product into a
grounded outlet protected by
a 16 A fuse. Do not neglect to
have the grounding installation
made by a qualified electrician.
Our company shall not be
liable for any damages that
will arise when the product
is used without grounding
in accordance with the local
regulations.

B

DANGER!

• Do not wash the product by
spraying or pouring water onto
it! Risk of electric shock!

• Never touch the power cable
plug with wet hands! Do not
grab the power cord to unplug
the machine, always unplug it
by holding the socket with one
hand, and pulling the plug with
the other hand.

• Product should be unplugged
during installation, maintenance,
cleaning and repair procedures.

B

DANGER!

• If the power cable is damaged,
it must be replaced by the
manufacturer, after sales service
or a similarly qualified person
(preferably an electrician) or
someone designated by the
importer in order to avoid
possible risks.

2. Important instructions for
environment

2.1 Compliance with WEEE Directive

This product complies with EU
WEEE Directive (2012/19/EU).
This product bears a classification
symbol for waste electrical and
electronic equipment (WEEE).

This product has been manufactured with
high quality parts and materials which can
be reused and are suitable for recycling. Do
not dispose of the waste product with normal
domestic and other wastes at the end of its
service life. Take it to the collection center
for the recycling of electrical and electronic
equipment. Please consult your local
authorities to learn about these collection
centers.

Compliance with RoHS Directive:
The product you have purchased complies

with EU RoHS Directive (2011/65/EU). It
does not contain harmful and prohibited
materials specified in the Directive.

2.2 Package information

Packaging materials of the product are

manufactured from recyclable materials in
accordance with our National Environment
Regulations. Do not dispose of the
packaging materials together with the
domestic or other wastes. Take them to
the packaging material collection points
designated by the local authorities.

3.Intended use

• This product has been designed for domestic

use. It is not for commercial purposes or it
should not be used out of its intended use.

• The product must only be used

for washing and rinsing of laundry
that are marked accordingly.

• The manufacturer waives any responsibility

arisen from incorrect usage or transportation.

• The service life of your product is 10 years.

During this period, original spare parts will be
available to operate the appliance properly.

4 / EN

Washing Machine / User’s Manual

4 Technical specifications

Complying Commission Delegated Regulation (EU) No 1061/2010

Supplier name or trademark Beko
Model name WTA 7612 XSW
Rated capacity (kg) 7
Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A+++
Annual Energy Consumption (kWh)
Energy consumption of the standard 60°C cotton programme at full load (kWh) 0,865
Energy consumption of the standard 60°C cotton programme at partial load (kWh) 0,555
Energy consumption of the standard 40°C cotton programme at partial load (kWh) 0,555
Power consumption in ‘off-mode’ (W) 0,400
Power consumption in ‘left-on mode’ (W) 0,800
Annual Water Consumption (l)
Spin-drying efficiency class / Scale from A (Highest Efficiency) to G (Lowest Efficiency) B
Maximum spin speed (rpm) 1200
Remaining moisture Content (%) 53
Standard cotton programme
Programme time of the standard 60°C cotton programme at full load (min) 215
Programme time of the standard 60°C cotton programme at partial load (min) 190
Programme time of the standard 40°C cotton programme at partial load (min) 190
Duration of the left-on mode (min) N/A
Airborne acoustical noise emissions washing/spinning (dB) 55/75
Built-in No
Height (cm) 84
Width (cm) 60
Depth (cm) 55
Net weight (±4 kg.) 60
Single Water inlet / Double Water inlet

• Available
Electrical input (V/Hz) 230 V / 50Hz
Total current (A) 10
Total power (W) 2200
Main model code 9210

(1)

Energy Consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load, and the consumption

of the low-power modes. Actual energy consumption will depend on how the appliance is used.

(2)

Water consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load. Actual water

consumption will depend on how the appliance is used.

(3)

“Standard 60°C cotton programme” and the “standard 40°C cotton programme” are the standard washing programmes to which the information
in the label and the fiche relates and these programmes are suitable to clean normally soiled cotton laundry and that they are the most efficient
programmes in terms of combined energy and water consumption.

Technical specifications may be changed without prior notice to improve the quality of the product.

(1)

(2)

(3)

Cotton Eco 60°C and 40°C

156

9899

• / -

5 / EN

Washing Machine / User’s Manual

4.1 Installation

• Apply to the nearest authorised service
agent for the installation of your product.

• Preparation of the location and electrical,
tap water and waste water installations at
the place of installation is under customer's
responsibility.

• Make sure that the water inlet and discharge
hoses as well as the power cable are not
folded, pinched or crushed while pushing
the product into its place after installation or
cleaning procedures.

• Make sure that the installation and electrical
connections of the product are performed
by authorised service. Manufacturer shall
not be held liable for damages that may
arise from procedures carried out by
unauthorised persons.

• Prior to installation, visually check if the
product has any defects on it. If so, do not
have it installed. Damaged products cause
risks for your safety.

4.1.1 Appropriate installation location

• Place the product on a hard and level floor.
Do not put it onto a carpet with high pile or
other similar surfaces.

• When the washing machine and dryer are
placed on top of each other, their total
weight –when loaded– amounts to 180 kg.
Place the product on a solid and flat floor
that has sufficient load carrying capacity!

• Do not place the product on the power cable.

• Do not install the product in the
environments where the temperature falls
below 0 ºC.

• Leaving a gap at the sides of the machine is
suggested to reduce vibration and noise

• On a graduated floor, do not place the
product next to the edge or on a platform.

• Do not place heat sources such as Hobs,
Irons, Ovens, etc. on the washing machine
and do not use them on the product.

4.1.2 Removing packaging reinforcement

Tilt the machine
backwards to remove the
packaging reinforcement.
Remove the packaging
reinforcement by pulling
the ribbon. Do not make
this operation alone by
yourself.

4.1.3 Removing the
transportation locks

1 Loosen all bolts with an appropriate wrench

until they turn freely.

2 Remove the transport safety bolts by

turning them slightly.

3 Insert the plastic covers in the bag

containing the user manual to the openings
on the rear panel.

A

• Remove the transportation safety bolts
before operating the washing machine!
Otherwise, the product will be damaged.

C

• Keep the transportation safety
bolts in a safe place to reuse when
the washing machine needs to
be moved again in the future.

• Install the transport safety bolts in reverse
order of the disassembly procedure.

• Never move the product without
the transportation safety bolts
properly fixed in place!

CAUTION!

INFORMATION

4.1.4 Connecting water supply

C

• The water supply pressure required to
run the product is between 1 to 10 bars
(0.1 – 1 MPa). It is necessary to have
10 – 80 liters of water flowing from the
fully open tap in one minute to have your
machine run smoothly. Attach a pressure
reducing valve if water pressure is higher.

A

• Models with a single water inlet should
not be connected to the hot water
tap. In such a case the laundry will get
damaged or the product will switch to
protection mode and will not operate.

• Do not use old or used water inlet
hoses on the new product. It may
cause stains on your laundry.

INFORMATION

CAUTION!

6 / EN

Washing Machine / User’s Manual

1 Tighten the nuts of the hose by hand.

Never use a tool when tightening the nuts.

2 When hose connection is completed,

check whether there is leak problems at the
connection points by opening the taps fully. If
any leaks occur, turn off the tap remove the
nut. Retighten the nut carefully after checking
the seal. In order to prevent the water leaks
and resultant damages, keep the taps closed
when you do not use the product.

4.1.5 Connecting the drain
hose to the drain

• Attach the end of the drain hose directly to
waste water drain, lavatory or bathtub.

A

• Your drain house will be flooded if the
hose comes out of its housing during
water discharge. Moreover, there is risk of
scalding due to high washing temperatures!
In order to prevent such situations and
make sure that the machine performs water
intake and discharge processes without
any problem, fix the drain hose securely.

CAUTION!

• In case the drain hose is elevated after laying
it on the floor level or close to the ground
(less than 40 cm above the ground), water
discharge becomes more difficult and the
laundry may come out excessively wet.
Therefore, follow the heights described in
the figure.

• To prevent the waste water to go back
into the machine again and to ensure easy
drainage, do not immerse the end of the
hose into the waste water or do not insert
it into the drain for more than 15 cm. If it is
too long, cut it short.

• The end of the hose should not be bent,
it should not be stepped on and the hose
must not be pinched between the drain and
the machine.

• If the length of the hose is too short, use
it by adding an original extension hose.
Length of the hose may not be longer than

3.2 m. To avoid water leak failures, the
connection between the extension hose and
the drain hose of the product must be fitted
well with an appropriate clamp as not to
come off and leak.

4.1.6 Adjusting the feet

A

• In order to ensure that the product
operates more silently and vibration­free, it must stand level and balanced
on its feet. Balance the machine by
adjusting the feet. Otherwise, the product
may move from its place and cause
crushing and vibration problems.

• Do not use any tools to loosen the lock
nuts. Otherwise, they will get damaged.

CAUTION!

100 cm

40 cm

• Connect the drain hose to a minimum height
of 40 cm and a maximum height of 100 cm.

7 / EN

1 Loosen the lock nuts on the feet by hand.
2 Adjust the feet until the product stands in a

stable and balanced way.

3. Tighten all lock nuts by hand again.

Washing Machine / User’s Manual

4.1.7 Electrical connection

Connect the product to a grounded outlet
protected by a 16 A fuse. Our company shall
not be liable for any damages that will arise
when the product is used without grounding in
accordance with the local regulations.

• Connection must comply with national regulations.

• The wiring for the electrical outlet circuit
must be sufficient to meet the appliance
requirements. Use of a Groud Fault Circuit
Interrupter (GFCI) is recommended.

• Power cable plug must be within easy reach
after installation.

• If the current value of the fuse or breaker
in the house is less than 16 Amps, have a
qualified electrician install a 16 Amp fuse.

• The voltage specified in the "Technical
specifications" section must be equal to
your mains voltage.

• Do not make connections via extension
cables or multi-plugs.

A

• Damaged power cables must be replaced
by the Authorised Service Agents.

CAUTION!

4.1.8 Initial use

Before starting to
use the product
make sure that
the preparations
are made which
are in line with the
“Important Safety

and Environment Instructions” and the
instructions in the “Installation” section.

To prepare the product for washing laundry,
perform first operation in Drum Cleaning
programme. If this program is not available
in your machine, apply the method which is
described in the section 4.4.2.

C

• Use an anti-limescale suitable
for the washing machines.

• Some water might have remained
in the product due to the quality
control processes in the production.
It is not harmful for the product.

INFORMATION

4.2 Preparation

4.2.1 Sorting the laundry

* Sort laundry according to type of fabric,

color, and degree of soiling and allowable
water temperature.

* Always obey the instructions given on the

garment tags.

4.2.2 Preparing laundry for washing

• Laundry items with metal attachments such
as, underwired bras, belt buckles or metal
buttons will damage the machine. Remove
the metal pieces or wash the clothes by
putting them in a laundry bag or pillow case.

• Take out all substances in the pockets such as
coins, pens and paper clips, and turn pockets
inside out and brush. Such objects may
damage the product or cause noise problem.

• Put small size clothes such as infant's socks
and nylon stockings in a laundry bag or
pillow case.

• Place curtains in without compressing them.
Remove curtain attachment items.

• Fasten zippers, sew loose buttons and
mend rips and tears.

• Wash “machine washable” or “hand
washable” labeled products only with an
appropriate programme.

• Do not wash colours and whites together.
New, dark coloured cottons release a lot of
dye. Wash them separately.

•

Tough stains must be treated properly before
washing. If unsure, check with a dry cleaner.

• Only use the dyes / color changers and
descaling agents which are appropriate
to machine wash. Always follow the
instructions on the package.

• Wash trousers and delicate laundry turned
inside out.

• Keep laundry items made of Angora wool in
the freezer for a few hours before washing.
This will reduce pilling.

•

Laundry that are subjected to materials such
as flour, lime dust, milk powder, etc. intensely
must be shaken off before placing into the
machine. Such dusts and powders on the
laundry may build up on the inner parts of
the machine in time and can cause damage.

8 / EN

Washing Machine / User’s Manual

4.2.3 Things to be done

1

3

2

for energy saving

Following information will help you use the product
in an ecological and energy-efficient manner.

• Operate the product in the highest
capacity allowed by the programme you
have selected, but do not overload; see,
"Programme and consumption table". See,
“Programme and consumption table"

• Always follow the instructions on the
detergent packaging.

• Wash slightly soiled laundry at low temperatures.

• Use faster programmes for small quantities
of lightly soiled laundry.

•

Do not use prewash and high temperatures
for laundry that is not heavily soiled or stained.

• If you plan to dry your laundry in a dryer,
select the highest spin speed recommended
during washing process.

•

Do not use more detergent than the
recommended amount specified on its package.

4.2.4 Loading the laundry

1. Open the laundry cover.

2. Put the laundry items into the machine in a
loose manner.

3.

Push and close the loading cover until you
hear the locking sound. Ensure that no items
are caught in the door. The loading door is
locked while a programme is running. The
door can only be opened a while after the
programme comes to an end.

4.2.5 Correct load capacity

The maximum load capacity depends on the
type of laundry, the degree of soiling and the
washing programme desired.

Machine automatically adjusts the water
amount according to the weight of the laundry
put inside it.

WARNING!

A

• Follow the information in the
“Programme and consumption table”.
When overloaded, machine’s washing
performance will drop. Moreover, noise
and vibration problems may occur.

4.2.6 Using detergent and softener

C

• When using detergent, softener, starch, fabric
dye, bleacher and decolorant, descaling
agents; read the manufacturer’s instructions
written on the package and follow the dosages
specified. Use measuring cup if available.

INFORMATION

The detergent drawer
is composed of three
compartments:

– (1) for prewash
– (2) for main wash
– (3) for softener
– ( ) in addition, there

is a siphon piece in the
softener compartment.

Detergent, softener and other cleaning agents

• Add detergent and softener before starting
the washing programme.

• While the washing cycle is in progress, do
not leave the detergent dispenser open!

• When using a programme without prewash,
do not put any detergent into the prewash
compartment (compartment nr. "1").

• In a programme with prewash, do not
put liquid detergent into the prewash
compartment (compartment nr. "1").

• Do not select a programme with prewash if
you are using a detergent bag or dispensing
ball. Place the detergent bag or the dispensing
ball directly among the laundry in the machine.

• If you are using liquid detergent, do
not forget to place the liquid detergent
container into the main wash compartment
(compartment number “2”).

Choosing the detergent type

Detergent type to be used depends on the
fabric type and color.

• Use different detergents for coloured and
white laundry.

• Wash your delicate clothes only with special
detergents (liquid detergent, wool shampoo,
etc.) used solely for delicate clothes.

• When washing dark coloured clothes and quilts,
it is recommended to use liquid detergent.

9 / EN

Washing Machine / User’s Manual

• Wash woolens with special detergent made

2

specifically for woolens.

A

• Use only detergents manufactured
specifically for washing machines.

• Do not use soap powder.

Adjusting detergent amount

The amount of washing detergent to be used
depends on the amount of laundry, the degree
of soiling and water hardness.

• Do not use amounts exceeding the dosage
quantities recommended on the detergent
package to avoid problems of excessive
foam, poor rinsing, financial savings and
finally, environmental protection.

• Use lesser detergent for small amounts or
lightly soiled clothes.

Using softeners

Pour the softener into the softener
compartment of the detergent drawer.

• Do not exceed the (>max<) level sign on the
softener compartment.

• If the softener has lost its fluidity, dilute it with
water before putting it in the detergent drawer.

Using liquid detergents
If the product contains a liquid detergent cup:

• Put the liquid detergent container into the
compartment no “2”.

• If the liquid detergent lost its fluidity, dilute
it with water before putting it into the
detergent container.

If the product does not contain a liquid
detergent cup:

• Do not use liquid detergent for the prewash
in a programme with prewash.

• Liquid detergent stains your clothes when
used with Delayed Start function. If you are
going to use the Delayed Start function, do
not use liquid detergent.

CAUTION!

Using gel and tablet detergent

•

If the gel detergent thickness is fluidal and
your machine does not contain a special liquid
detergent cup, put the gel detergent into the
main wash detergent compartment during
first water intake. If your machine contains a
liquid detergent cup, fill the detergent into this
cup before starting the programme.

• If the gel detergent thickness is not fluidal or
in the shape of capsule liquid tablet, put it
directly into the drum before washing.

• Put tablet detergents into the main wash
compartment (compartment nr. "2") or
directly into the drum before washing.

Using starch

• Put the liquid soda, powder soda or the
fabric dye into the softener compartment.

Do not use softener and starch together in a

washing cycle.

Wipe the inside of the machine with a damp

and clean cloth after using starch.

Using limescale remover

• When required, use limescale removers
manufactured specifically for washing
machines only.

Using bleaches

Add the bleach at the beginning of the

washing cycle by selecting a prewash
program. Do not put detergent in the
prewash compartment. As an alternative
application, select a programme with extra
rinse and add the bleaching agent while the
machine is taking water from the
compartment during first rinsing step.

• Do not use bleaching agent and detergent
by mixing them. Use just a little amount
(approx. 50 ml) of bleaching agent and
rinse the clothes very well as it causes skin
irritation. Do not pour the bleach onto the
laundry and do not use it with the colored items.

• When using oxygen-based decolorant,
select a program which washes the laundry
at a low temperature.

• Oxygen-based decolorant can be used with
the detergent; however, if it is not at the
same consistence, first put detergent in the
compartment number “2” in the detergent
dispenser and wait for the machine to flush
the detergent when taking in water. While
the machine continues taking in water, add
decolorant in the same compartment.

detergent

10 / EN

Washing Machine / User’s Manual

4.2.7 Tips for efficient washing

Light Colours and
Whites

(Recommended
temperature range based
on soiling level: 40-90 oC)

It may be necessary to
pre-treat the stains or

Heavily
Soiled

(difficult
stains such
as grass,
coffee,
fruits and
blood.)

Normally
Soiled

(For example,
stains caused

Soiling Level

by body on
collars and
cuffs)

Lightly
Soiled

(No visible
stains
exist.)

perform prewash. Powder
and liquid detergents
recommended for whites
can be used at dosages
recommended for
heavily soiled clothes. It
is recommended to use
powder detergents to
clean clay and soil stains
and the stains that are
sensitive to bleaches.

Powder and liquid
detergents recommended
for whites can be used at
dosages recommended
for normally soiled
clothes.

Powder and liquid
detergents recommended
for whites can be used at
dosages recommended
for lightly soiled clothes.

Clothes

Colours

(Recommended
temperature range based
on soiling level: cold-40
oC)

Powder and liquid
detergents recommended
for colors can be used at
dosages recommended
for heavily soiled clothes.
It is recommended to use
powder detergents to
clean clay and soil stains
and the stains that are
sensitive to bleaches. Use
detergents without bleach.

Powder and liquid
detergents recommended
for colors can be used at
dosages recommended
for normally soiled clothes.
Detergents which do not
contain bleach should be
used.

Powder and liquid
detergents recommended
for colors can be used at
dosages recommended
for lightly soiled clothes.
Detergents which do not
contain bleach should be
used.

Black/Dark
Colours

(Recommended
temperature
range based on
soiling level: cold

-40 oC)

Liquid detergents
suitable for
colors and dark
colors can be
used at dosages
recommended
for heavily soiled
clothes.

Liquid detergents
suitable for
colors and dark
colors can be
used at dosages
recommended for
normally soiled
clothes.

Liquid detergents
suitable for
colors and dark
colors can be
used at dosages
recommended
for lightly soiled
clothes.

Delicates/
Woolens/Silks

(Recommended
temperature range
based on soiling
level: cold -30 oC)

Prefer liquid
detergents
produced for
delicate clothes.
Woolen and silk
clothes must
be washed with
special woolen
detergents.

Prefer liquid
detergents
produced for
delicate clothes.
Woolen and silk
clothes must
be washed with
special woolen
detergents.
Prefer liquid
detergents
produced for
delicate clothes.
Woolen and silk
clothes must
be washed with
special woolen
detergents.

Indicative values for Synthetics programmes

Remaining Moisture

Content (%) **

≤ 1000 rpm > 1000 rpm

Load (kg)

Water

Consumption (l)

Energy

Consumption

(kWh)

Programme

Duration (min) *
Synthetics 60 3 65 1,20 115/140 45 40
Synthetics 40 3 63 0,75 115/140 45 40

* You can see the washing time of the programme you have selected on the display of the machine. It is normal that small

differences may occur between the time shown on the display and the real washing time.

** Remaining moisture content values may differ according to the selected spin speed.

11 / EN

Washing Machine / User’s Manual

Remaining Moisture

Content (%) **

4.3 Operating the product

4.3.1 Control panel

1 2 3 4

Camisas

Plumíferos/Penas

Manchas PRO

Sport

R. oscura/R. escura

Algodón/Algodão

Algodón/Algodão

Sintéticos

Rápido 28'/14'

Delicados

1200

90°

1000

60°

800

40°

600

30°

20°

Mix

WTA 7612 XSW

1 - Programme Selection knob (Uppermost
position On / Off)

2 - Display
3 - Delayed Start Button
4 - Programme Follow-up indicator
5 - Start / Pause button
6 - Auxiliary function button 3
7 - Auxiliary function button 2
8 - Auxiliary function button 1

57 68910

9 - Spin Speed Adjustment button
10 - Temperature Adjustment button

4.3.2 Preparing the machine

1.Make sure that the hoses are connected tightly.

2.Plug in your machine.

3.Turn the tap on completely.

4.Place the laundry in the machine.

5.Add detergent and fabric softener.

4.3.3 Programme selection and
tips for efficient washing

1.Select the programme suitable for the type,
quantity and soiling degree of the laundry
in accordance with the "Programme and
consumption table" and the temperature
table below.

2.Select the desired programme with the
Programme Selection knob.

4.3.4 Programme and consumption table

EN 2 Auxiliary functions

Programme

Max. Load (kg)

Water Consumption

(l)

Energy

Consumption (kWh)

Max. Speed***

Prewash

90 7 92 2,25 1200 • • • Cold - 90

Algodón

60 7 92 1,70 1200 • • • Cold - 90
40 7 89 1,05 1200 • • • Cold - 90

60** 7 49 0,865 1200 Cold - 60

Algodón Eco

60** 3,5 42 0,555 1200 Cold - 60
40** 3,5 42 0,555 1200 Cold - 60

Sintéticos

60 3 65 1,20 1200 • • • Cold - 60
40 3 63 0,75 1200 • • • Cold - 60

Rápido 28‘/14‘ + Fast+ 30 2 41 0,15 1200 • Cold - 90

90 7 62 2,00 1200 • Cold - 90

Rápido 28‘/14‘

60 7 62 1,10 1200 • Cold - 90

30 7 60 0,20 1200 • Cold - 90
Mix 40 3,5 65 0,75 800 • • Cold - 40
Lana 40 1,5 55 0,55 1200 Cold - 40
Delicados 40 3,5 51 0,65 1200 Cold - 40
Sport 40 3,5 44 0,45 1200 • Cold - 40
R. oscura 40 3 82 0,85 1200 • • Cold - 40
Manchas PRO 60 3,5 70 1,50 1200 • • 30 - 60
Plumíferos 60 1,5 75 1,75 1000 40-60
Camisas 60 3 65 1,70 800 • • 40-60
hygiene+ 90 7 132 3,00 1200 40-90
Drum Cleaning 90 - 77 2,50 600 90

Selectable temperature

Fast+

Pet Hair Removal

range °C

12 / EN

Washing Machine / User’s Manual

• : Selectable
* : Automatically selected, no canceling.
** : Energy Label programme (EN 60456 Ed.3)
***: If maximum spin speed of the machine is

lower then this value, you can only select up
to the maximum spin speed.

- : See the programme description for
maximum load.

** "Cotton Economic 40°C and
Cotton Economic 60°C are
standard programmes." These
programmes are known as '40°C
cotton standard programme' and
'60°C cotton standard programme'
and indicated with the
symbols on the panel.

C

• Water and power consumption may vary
subject to the changes in water pressure,
water hardness and temperature, ambient
temperature, type and amount of laundry,
selection of auxiliary functions and spin
speed, and changes in electric voltage.

• You can see the washing duration
on the display of your machine while
selecting a programme. Depending
on the amount of laundry you have
loaded into your machine, there may
be a difference of 1-1.5 hours between
the duration shown on the display and
the actual duration of the wash cycle.
Duration will be automatically updated
soon after the washing starts.

• The auxiliary functions in the table may vary
according to the model of your machine.

• Auxiliary function selection modes can be
changed by the manufacturing company.
Existing selection modes can be removed
or new selection modes can be added.

INFORMATION

4.3.5 Main programmes

Depending on the type of fabric, use the
following main programmes.

• Algodón (Cottons)

You can wash your durable cotton laundry
(sheets, bedlinen, towels, bathrobes,
underwear etc.) in this programme. When
the quick wash function button is pressed,
programme duration becomes notably shorter
but effective washing performance is ensured
with intense washing movements. If the
quick wash function is not selected, superior
washing and rinsing performance is ensured
for your heavily soiled laundry.

• Sintéticos (Synthetics)

You can wash your laundry (such as shirts,
blouses, synthetic/cotton blended fabrics etc.)
in this programme. The programme duration
gets notable shorter and washing with high
performance is ensured. If the quick wash
function is not selected, superior washing and
rinsing performance is ensured for your heavily
soiled laundry.

• Lana (Woollens)

Use to wash your woolen/delicate laundry.
Select the appropriate temperature complying
with the tag of your clothes. Your laundry will
be washed with a very gentle washing action in
order not to damage the clothes.

“The wool wash cycle of this
machine has been approved
by The Woolmark Company
for the washing of machine
washable wool products

provided that the products are
washed according to the instructions on the
garment label and those issued by the
manufacturer of this washing machine.

“In UK, Eire, Hong Kong and India the Woolmark
trade mark is a Certification trade mark.”

M1367”

4.3.6 Additional programmes

For special cases, additional programmes are
available in the machine.

13 / EN

C

• Additional programmes may differ
according to the model of the machine.

INFORMATION

Washing Machine / User’s Manual

• Algodón Eco (Cottons Eco)

Use to wash your normally soiled, durable
cotton and linen laundry. Although it washes
longer than all other programmes, it provides
high energy and water savings. Actual water
temperature may be different from the stated
wash temperature. When you load the
machine with less laundry (e.g. ½ capacity
or less), periods in programme stages may
automatically get shorter. In this case, energy
and water consumption will decrease more,
providing a more economic wash.

• hygiene+

Applying a steam step at the beginning of the
programme allows to soften the dirt easily.

Use this programme for your laundry (baby
clothes, bed sheets, bedlinen, underwear,
etc. cotton items) that requires an anti-allergic
and hygienic washing at high temperature
with intensive and long washing cycle. The
high level of hygiene is ensured thanks to the
steam application before the programme, long
heating duration and additional rinsing step.

• Programme was tested by “The British
Allergy Foundation“ (Allergy UK) with the
60°C temperature option selected and
it was certified in terms of its efficacy in
eliminating allergens in addition to bacteria
and mould.

Allergy UK is the brand of the
British Allergy Association. Seal
of Approval is created to guide
people that require
recommendation about a

product that the related product
restricts / reduces / eliminates the allergens
or reduces the allergen content significantly in
the ambient where allergy patients exist. It
aims to provide assurance that the products
are tested scientifically or examined in a way
to provide measurable results.

• Delicados (Delicates)

You can wash your delicate clothes such as
cotton/synthetic blended knitwear or hosiery in
this programme. It washes with more delicate
washing action. Wash your clothes whose
colour you want to preserve either at 20degrees
or by selecting the cold wash option.

• Rápido 28’/14’ (Daily Quick / Super Short)

Use this programme to wash your lightly soiled
or unspotted cotton clothes in a short time.
The programme duration can be reduced up
to 14 minutes when the quick wash function
is selected. When the quick wash function is
selected, maximum 2 (two) kg of laundry must
be washed.

• R. oscura (Dark Care)

Use this programme to protect the colour
of your dark-coloured garments or jeans.
It performs high performance washing
with special drum movement even if the
temperature is low. It is recommended to use
liquid detergent or woolen shampoo for dark
coloured laundry. Do not wash your delicate
clothes containing wool or etc.

• Mix

Use to wash your cotton and synthetic clothes
together without sorting them.

• Camisas (Shirts)

This programme is used to wash the shirts
made from cotton, synthetic and synthetic
blended fabrics altogether. It reduces wrinkles.
Steam is applied at the end of the programme
to help the wrinkle reducing function. The
special spin profile and steam applied at the
end of the programme reduce the wrinkles
on your shirts. When the quick wash function
is selected, the Pre-treatment algorithm is
executed.

• Apply the pre-treatment chemical on your
garments directly or add it together with
detergent when the machine starts to take
water from the main washing compartment.
Thus, you can obtain the same performance
as you obtain with normal washing in a
much shorter period of time. Usage life of
your shirts increases.

• Sport

You can use this programme to wash sports and
outdoors garments that contain cotton/synthetics
mix and water repellent covers such as gore-tex
etc. It makes sure your garments are washed
gently thanks to special rotating movements.

14 / EN

Washing Machine / User’s Manual

• Manchas PRO (StainExpert)

The machine has a special stain programme
which enables the removal of different types
of stains in the most effective way. Use this
programme only for durable colourfast cotton
laundry. Do not wash delicate and pigmenting
clothes and laundry in this programme. Before
washing, garment tags should be checked
(recommended for cotton shirts, trousers,
shorts, t-shirts, baby clothes, pyjamas, aprons,
table clothes, beddings, duvet cover, bed
sheet, pillowcase, bath-beach towel, towel,
socks, cotton underwear that are suitable for
washing at high temperature and long time). In
the automatic stain programme, you can wash
24 types of stains divided into two different
groups according to quick function selection.
You can see stain groups based on the
selection of the quick function.

You can find stain groups based on quick
function below:

When quick function is selected:
Blood Fruit juice
Chocolate Ketchup
Pudding Red Wine
Egg Curry
Tea Jam
Coffee Coal

When quick function is not selected:
Butter Food
Grass Mayonnaise
Mud Salad Dressing
Coke Make-up
Sweat Machine Oil
Collar Soil Baby Food

• Select the stain programme.

• Select the stain you want to clean by locating
it in the groups above and selecting the related
group with the quick auxiliary function button.

• Read the garment tag carefully and ensure
that correct temperature and spin speed are
selected.

• Plumíferos (Down Wear)

Use this programme to wash your coats, vest,
jackets etc. containing feathers with a “machine­washable” label on them. Thanks to special
spinning profiles, it is ensured that the water
reaches the air gaps amongst the feathers.

Steam is applied at the end of the programme
to soften bulky laundry such as towels.

4.3.7 Special programmes

For specific applications, select any of the
following programmes.

• Rinse

Use when you want to rinse or starch separately.

• Spin+Drain

You can use this function to remove the water on
the garment of drain the water in the machine.

Before selecting this programme, select the
desired spin speed and press Start / Pause
button. First, the machine will drain the water
inside of it. Then, it will spin the laundry with
the set spin speed and drain the water coming
out of them.

If you wish to drain only the water without
spinning your laundry, select the Pump+Spin
programme and then select the No Spin
function with the help of Spin Speed
Adjustment button. Press Start / Pause button.

C

• Use a lower spin speed for delicate laundries.

INFORMATION

4.3.8 Temperature selection

Whenever a new programme is selected,
the recommended temperature value for
the selected programme appears on the
temperature indicator.

To decrease the temperature, press
the Temperature Adjustment button.
Temperature will decrease gradually.
Temperature level lights will not turn on
when the cold level is selected.

15 / EN

C

• If the programme has not reached
the heating step, you can change
the temperature without switching
the machine to Pause mode.

INFORMATION

Washing Machine / User’s Manual

4.3.9 Spin speed selection

Whenever a new programme is selected, the
recommended spin speed of the selected
programme is displayed on the spin speed
indicator.

To decrease the spin speed, press the Spin
Speed Adjustment button. Spin speed
decreases gradually. Then, depending on the
model of the product, "Rinse Hold" and "No
Spin" options appear on the display. When "No
Spin" is selected, the rinse level indicator lights
will not turn on.

Rinse hold

If you are not going to unload your clothes
immediately after the programme completes, you
can use rinse hold function to keep your laundry
in the final rinsing water in order to prevent them
from getting wrinkled when there is no water in
the machine. Press Start / Pause button after this
process if you want to drain the water without
spinning your laundry. Programme will resume
and complete after draining the water.

If you want to spin the laundry held in water,
adjust the Spin Speed and press Start / Pause
button. The programme will resume. Water is
drained, laundry is spun and the programme is
completed.

C

• If the programme has not reached
the spinning step, you can change
the speed without switching the
machine to Pause mode.

INFORMATION

4.3.10 Auxiliary function selection

Select the desired auxiliary functions before
starting the programme. Furthermore, you may
also select or cancel auxiliary functions that
are suitable to the running programme without
pressing the Start / Pause button when the
machine is operating. For this, the machine
must be in a step before the auxiliary function
you are going to select or cancel. If the auxiliary
function cannot be selected or canceled, light
of the relevant auxiliary function will blink 3
times to warn the user.

C

• If a second auxiliary function conflicting
with the first one is selected before starting
the machine, the function selected first
will be canceled and the second auxiliary
function selection will remain active.

• An auxiliary function that is not compatible
with the programme cannot be selected.
(See, "Programme and consumption table")

• Auxiliary Function buttons may vary
according to the model of the machine.

INFORMATION

4.3.10.1 Auxiliary functions

• Prewash

A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save
energy, water, detergent and time.

C

• Prewash without detergent is
recommended for tulle and curtains.

• Fast+

When this function is selected, the durations of
the relevant programmes get shorter by 50%.

Thanks to the optimised washing steps,
high mechanic activity and optimum water
consumption, high washing performance is
achieved in spite of the reduced duration.

• Pet Hair Removal

This function helps to remove pet hair that
remain on your garments more effectively.

When you select this function, Prewash and
Extra Rinse steps are added to the normal
programme. Thus, washing is performed with
more water and the pet hair is removed more
effectively.

INFORMATION

16 / EN

Washing Machine / User’s Manual

4.3.10.2 Functions/Programmes
Selected by Pressing the Function
Buttons for 3 Seconds

• Drum Cleaning

Press and hold the auxiliary function button 1
for 3 seconds to select the programme. Use
regularly (once in every 1-2 months) to clean
the drum and provide the required hygiene.
Steam is applied before the programme to
soften the residues in the drum. Operate the
programme while the machine is completely
empty. To obtain better results, put powder
lime-scale remover for washing machines into
the detergent compartment no. “2”. When the
programme is over, leave the loading door ajar
so that the inside of the machine gets dry.

C

• This is not a washing programme.
It is a maintenance programme.

• Do not run the programme when there
is something in the machine. If you try to
do so, the machine detects that there is
load inside and aborts the programme.

• Child lock 3’’

Use Child Lock function to prevent children
from tampering with the machine. Thus you can
avoid any changes in a running programme.

C

• If the Programme Selection knob is
turned when the Child Lock is active,
"Con" appears on the display. The
Child Lock does not allow any change
in the programmes and the selected
temperature, speed and auxiliary functions.

• Even if another programme is selected
with the Programme Selection knob
while the Child Lock is active, previously
selected programme will continue running.

INFORMATION

INFORMATION

To activate the Child Lock:

2. Pres and hold the Auxiliary Function button
for 3 seconds. C03, C02, C01 will appear on
the display respectively while you keep the
button pressed for 3 seconds. Then, while
the light of the Auxiliary Function button 2
is flashing, "Con" will appear on the display
indicating that the child lock has been activated.
If you press any button or turn the Programme
Selection knob when the Child Lock is active,
same phrase will appear on the display.

To deactivate the Child Lock:

Press and hold the Auxiliary Function button 2
for 3 seconds while a programme is running.
C03, C02, C01 will appear on the display
respectively while you keep the button pressed
for 3 seconds. Then, while the light of the
auxiliary function button 2 is flashing, "COF" will
appear on the display indicating that the child
lock has been deactivated.

C

• In addition to the method above, to
deactivate the Child Lock, switch the
Programme Selection knob to On / Off
position when no programme is running,
and select another programme.

• Child Lock is not deactivated after power
failures or when the machine is unplugged.

INFORMATION

4.3.11 Delayed Start

With the Delayed Start function the startup
of the programme may be delayed up to 19
hours. Delayed start time can be increased by
increments of 1 hour.

C

• Do not use liquid detergents when
you set Delayed Start! There is the
risk of staining of the clothes.

1. Open the loading door, place the laundry
and put detergent, etc.

2. Select the washing programme,
temperature, spin speed and, if required,
the auxiliary functions.

3. Set the desired time by pressing the
Delayed Start button.

INFORMATION

17 / EN

Washing Machine / User’s Manual

4. Press Start / Pause button. The delayed start
time you have set is displayed. Delayed start
countdown starts. “_” symbol next to the delayed
start time moves up and down on the display.

C

• Additional laundry may be loaded
during the delayed start period.

5. At the end of the countdown, duration of
the selected programme will be displayed.
“_” will disappear and the selected
programme will start.

Changing the delayed start period

If you want to change the time during countdown:

1. Press the Delayed Start button. Time will
increase by 1 hour each time you press the
button.

2. If you want to decrease the delayed start
time, press Delayed Start button repeatedly
until the desired delayed start time appears
on the display.

Canceling the Delayed Start function

If you want to cancel the delayed start countdown
and start the programme immediately:

1. Set the Delayed Start period to zero or turn the
Programme Selection knob to any programme.
Thus, Delayed Start function will be canceled.
The End/Cancel light flashes continuously.

2. Then, select the programme you want to
run again.

3. Press Start/Pause button to start the
programme.

INFORMATION

4.3.12 Starting the programme

1. Press Start/Pause button to start the
programme.

2. Programme follow-up light showing the
startup of the programme will turn on.

C

• If no programme is started or no button is
pressed within 1 minute during programme
selection process, the machine will switch
to Pause mode and the illumination level
of the temperature, speed and loading
door indicator lights will decrease. Other
indicator lights and indicators will turn off.
Once the Programme Selection knob is
rotated or any button is pressed, indicator
lights and indicators will turn on again.

INFORMATION

4.3.13 Progress of programme

Progress of a running programme can be
followed from the Programme Follow-up
indicator. At the beginning of every programme
step, the relevant indicator light will turn on and
light of the completed step will turn off.

You can change the auxiliary functions, speed
and temperature settings without stopping
the programme flow while the programme
is running. To do this, the change you are
going to make must be in a step after the
running programme step. If the change is
compatible, relevant lights will flash for 3 times.

C

• If the machine does not pass to the spinning
step, Rinse Hold function might be active or the
automatic unbalanced load detection system
might be activated due to the unbalanced
distribution of the laundry in the machine.

INFORMATION

not

4.3.14 Loading door lock

There is a locking system on the loading door of
the machine that prevents opening of the loading
door in cases when the water level is unsuitable.

Loading door light will start flashing when the
machine is switched to Pause mode. Machine
checks the level of the water inside. If the level is
suitable, Loading Door light illuminates steadily within
1-2 minutes and the loading door can be opened.

If the level is unsuitable, Loading Door light
turns off and the loading door cannot be
opened. If you are obliged to open the Loading
Door while the Loading Door light is off, you
must cancel the current programme. See.
"Cancelling the programme"

4.3.15 Changing the selections
after programme has started

Switching the machine to pause mode

Press the Start / Pause button to switch the
machine to pause mode while a programme
is running. The light of the step which the
machine is in starts flashing in the Programme
Follow-up indicator to show that the machine
has been switched to the pause mode.

Also, when the loading door is ready to be
opened, Loading Door light will also illuminate
continuously in addition to the programme step light.

18 / EN

Washing Machine / User’s Manual

Changing the auxiliary function, speed and
temperature

Depending on the step the programme has
reached, you can cancel or select the auxiliary
functions. See, "Auxiliary function selection".

You can also change the speed and
temperature settings. See, "Spin speed
selection" and "Temperature selection".

C

• If no change is allowed, the
relevant light will flash 3 times.

Adding or taking out laundry

1. Press Start / Pause button to switch the
machine to pause mode. The programme
follow-up light of the relevant step during
which the machine was switched into the
pause mode will flash.

2. Wait until the Loading Door can be opened.

3. Open the Loading Door and add or take out
the laundry.

4. Close the Loading Door.

5. Make changes in auxiliary functions,
temperature and speed settings if necessary.

6. Press Start / Pause button to start the machine.

INFORMATION

4.3.16 Cancelling the programme

To cancel the programme, turn the Programme
Selection knob to select another programme.
Previous programme will be cancelled. End /
Cancel light will flash continuously to notify that
the programme has been canceled.

Your machine will end the programme when you
turn the Programme Selection knob; however,
it does not drain the water inside. When you
select and start a new programme, the newly
selected programme will start depending on the
step the previous programme was canceled in.
For example, it may take in additional water or
continue to wash with the water inside.

4.3.17 End of programme

“End” appears on the display at the end of the
programme.

1. Wait until the loading door light illuminates
steadily.

2. Press On/Off button to switch off the machine.

3. Take out your laundry and close the loading door.
Your machine is ready for the next washing cycle.

4.3.18 Your machine features

"Standby Mode".

After you switch on your machine with On-Off
button, if no programme is started or no other
procedure is performed at the selection step or
no action is taken within approx. 2 minutes after
the selected programme ends, your machine will
switch to energy saving mode automatically. The
brightness of the indicator lights will decrease.
Also, if your product has a display that shows
programme time, this display will be completely
turned off. If you turn the Programme Selection
knob or touch any button, lights and display
will switch back to previous condition. The
selections which you make when exiting from
the energy efficiency may change. Please check
the correctness of your selections before starting
the programme. If necessary, please make your
settings again.This is not an error.

C

• Depending on the step where the
programme was canceled in, you may have
to put detergent and softener again for
the programme you have selected anew.

19 / EN

INFORMATION

Washing Machine / User’s Manual

4.4 Maintenance and cleaning

Service life of product extends and frequently
experienced problems will be reduced if it is
cleaned at regular intervals.

4.4.1 Cleaning the detergent drawer

Clean the detergent
drawer at regular intervals
(every 4-5 washing cycles)
as shown below in order
to prevent accumulation of
powder detergent in time.

Lift the rear part of the siphon to remove it as
illustrated.

If more than normal amount of water and
softener mixture starts to gather in the softener
compartment, the siphon must be cleaned.

1 Press the dotted point on the siphon in the

softener compartment and pull towards you
until the compartment is removed from the
machine.

2. Wash the detergent drawer and the
siphon with plenty of lukewarm water in a
washbasin. In order to prevent the residues to
contact your skin, clean it with an appropriate
brush by wearing a pair of gloves.

3 Insert the drawer back into its place after

cleaning and make sure that it is seated well.

4.4.2 Cleaning the loading

door and the drum

For products with drum cleaning programme,
please see Operating the product ­Programmes.

C

• Repeat Drum Cleaning process
in every 2 months.

• Use an detergent / anti-limescale
suitable for the washing machines.

INFORMATION

If the holes on the bellow shown in the figure is
blocked, open the holes using a toothpick.

C

• Foreign metal substances will cause
rust stains in the drum. Clean the
stains on the drum surface by using
cleaning agents for stainless steel.

A

• Never use steel wool or wire wool.
These will damage the painted,
chromated and plastic surfaces.

INFORMATION

WARNING

4.4.3 Cleaning the body
and control panel

Wipe the body of the machine with soapy
water or non-corrosive mild gel detergents as
necessary, and dry with a soft cloth.

Use only a soft and damp cloth to clean the
control panel.

4.4.4 Cleaning the water intake filters

There is a filter at the end of each water intake
valve at the rear of the machine and also at
the end of each water intake hose where they
are connected to the tap. These filters prevent
foreign substances and dirt in the water to
enter the washing machine. Filters should be
cleaned as they do get dirty.

1. Close the
taps.

2. Remove the
nuts of the
water intake
hoses to
access the
filters on the
water intake
valves.

20 / EN

After every washing
make sure that no foreign
substance is left in the
drum.

Clean them with an appropriate brush. If the

filters are too dirty, remove them from their
places with a pliers and clean in this way.

3.

Take out the filters on the flat ends of the
water intake hoses together with the gaskets
and clean thoroughly under running water.

4. Replace the seals and filters carefully and
tighten their nuts by hand.

Washing Machine / User’s Manual

4.4.5 Draining remaining water
and cleaning the pump filter

The filter system in your machine prevents
solid items such as buttons, coins and fabric
fibers clogging the pump impeller during
discharge of washing water. Thus, the water
will be discharged without any problem and the
service life of the pump will extend.

If the machine fails to drain water, the pump filter
is clogged. Filter must be cleaned whenever it
is clogged or in every 3 months. Water must be
drained off first to clean the pump filter.

In addition, prior to transporting the machine
(e.g., when moving to another house) and in
case of freezing of the water, water may have
to be drained completely.

3 Follow the below procedures in order to

drain water.

The product does not have an emergency
water drain hose, in order to drain the water:

A

• Foreign substances left in the pump
filter may damage your machine
or may cause noise problem.

• If the product is not being used,
shut the tap shut, remove mains
pipe and drain the water inside the
machine against any likely freezing.

• After each use, turn off the water tap to
which the mains hose is connected.

In order to clean the dirty filter and discharge
the water:

1 Unplug the machine to cut off the supply

power.

A

• Temperature of the water inside the
machine may rise up to 90 ºC. To avoid
the burning risk, clean the filter after the
water inside the machine is cooled down.

2. Open the filter cover.

CAUTION!

CAUTION!

a. In order to collect the water to flow out of

the filter, place a large vessel in front of the
filter.

b. Turn and loosen the pump filter until water

starts to flow (counterclockwise). Fill the
flowing water into the container you have
placed in front of the filter. Always keep a
piece of cloth handy to absorb any spilled
water.

c When the water inside the machine is

finished, take out the filter completely by
turning it.

4. Clean any residues inside the filter as well
as fibers, if any, around the pump impeller
region.

5. Replace the filter.

6. If the filter cap is composed of two pieces,
close the filter cap by pressing on the tab.
If it is one piece, seat the tabs in the lower
part into their places first, and then press
the upper part to close.

21 / EN

Washing Machine / User’s Manual

5 Troubleshooting

Program does not start after closing the door.

• Start / Pause / Cancel button was not pressed. >>>*Press
the Start / Pause / Cancel button.

• It may be difficult to close the loading door in case of
excessive loading. >>>Reduce the amount of laundry and
make sure that the loading door is closed properly.

Programme cannot be started or selected.

• Washing machine has switched to self protection mode
due to a supply problem (line voltage, water pressure,
etc.). >>>To cancel the programme, turn the Programme
Selection knob to select another programme. Previous
programme will be canceled. (see. “Cancellation of
program”)

Water in the machine.

• Some water might have remained in the product due to the
quality control processes in the production. >>>This is not
a failure; water is not harmful to the machine.

The machine enters standby mode after the
programme starts or it does not take in water.

• Tap is turned off. >>>Turn on the taps.

• Water inlet hose is bent. >>>Flatten the hose.

• Water inlet filter is clogged. >>>Clean the filter.

• Loading door may be open. >>>Close the door.

• The water connection may be wrong or water may be cut
off (When the water is cut off, washing or rinsing LEDs
flash). >>>Check the water connection. If the water is cut
off, press the Start/Pause key after the water has been
supplied again to resume the operation from standby
mode.

Machine does not drain water.

• Water drain hose might be clogged or twisted. >>>Clean
or flatten the hose.

• Pump filter is clogged. >>> Clean the pump filter.

Machine vibrates or makes noise.

• Machine might be standing unbalanced. >>>Adjust the
feet to level the machine.

• A hard substance might have entered into the pump filter.
>>>Clean the pump filter.

• Transportation safety bolts are not removed. >>>Remove
the transportation safety bolts.

• Laundry quantity in the machine might be too little. >>>Add
more laundry to the machine.

• Machine might be overloaded with laundry. >>>Take out
some of the laundry from the machine or distribute the
load by hand to balance it homogenously in the machine.

• Machine might be leaning on a rigid item. >>>Make sure
that the machine is not leaning on anything.

There is water leaking from the bottom of the
washing machine.

• Water drain hose might be clogged or twisted. >>>Clean
or flatten the hose.

• Pump filter is clogged. >>>Clean the pump filter.

Machine stopped shortly after the programme
started.

• Machine might have stopped temporarily due to low voltage.
>>>It will resume running when the voltage restores to
the normal level.

Machine directly discharges the water it takes in.

• Draining hose might not be at adequate height.
>>>Connect the water draining hose as described in the
operation manual.

No water can be seen in the machine during
washing.

• The water level is not visible from outside of the washing
machine. >>>This is not a failure.

Loading door cannot be opened.

• Door lock is activated because of the water level in the
machine. >>>Drain the water by running the Pump or
Spin programme.

• Machine is heating up the water or it is at the spinning
cycle. >>>Wait until the programme completes.

• Child lock is engaged. Door lock will be deactivated a
couple of minutes after the programme has come to an
end. >>>Wait for a couple of minutes for deactivation of
the door lock.

• Loading door may be stuck because of the pressure it is
subjected to. >>>Grab the handle and push and pull the
loading door to release and open it.

Washing takes longer time than specified in the
manual.(*)

• Water pressure is low. >>>Machine waits until taking in
adequate amount of water to prevent poor washing quality
due to the decreased amount of water. Therefore, the
washing time extends.

• Voltage might be low. >>>Washing time is prolonged to
avoid poor washing results when the supply voltage is low.

• Input temperature of water might be low. >>>Required
time to heat up the water extends in cold seasons. Also,
washing time can be lengthened to avoid poor washing
results.

• Number of rinses and/or amount of rinse water might have
increased. >>>Machine increases the amount of rinse
water when good rinsing is needed and adds an extra
rinsing step if necessary.

• Excessive foam might have occurred and automatic foam
absorption system might have been activated due to too
much detergent usage. >>>Use recommended amount
of detergent.

Programme time does not countdown. (On models
with display) (*)

• Timer may stop during water intake. >>>Timer indicator
will not countdown until the machine takes in adequate
amount of water. The machine will wait until there is
sufficient amount of water to avoid poor washing results
due to lack of water. Timer indicator will resume countdown
after this.

• Timer may stop during heating step. >>>Timer indicator
will not countdown until the machine reaches the selected
temperature.

• Timer may stop during spinning step. >>>Automatic
unbalanced load detection system might be activated due
to the unbalanced distribution of the laundry in the drum.

Programme time does not countdown. (*)

• There might be unbalanced load in the machine.
>>>Automatic unbalanced load detection system might
be activated due to the unbalanced distribution of the
laundry in the drum.

22 / EN

Washing Machine / User’s Manual

Machine does not switch to spinning step. (*)

• There might be unbalanced load in the machine.
>>>Automatic unbalanced load detection system might
be activated due to the unbalanced distribution of the
laundry in the drum.

• The machine will not spin if water is not drained completely.
>>>Check the filter and the draining hose.

• Excessive foam might have occurred and automatic foam
absorption system might have been activated due to too
much detergent usage.>>>Use recommended amount of
detergent.

Washing performance is poor: Laundry turns gray.
(**)

• Insufficient amount of detergent has been used over a long
period of time. >>>Use the recommended amount of
detergent appropriate for water hardness and the laundry.

• Washing was made at low temperatures for a long time.
>>>Select the proper temperature for the laundry to be
washed.

• Insufficient amount of detergent is used with hard water.
>>>Using insufficient amount of detergent with hard
water causes the soil to stick on the cloth and this turns
the cloth into gray in time. It is difficult to eliminate graying
once it happens. Use the recommended amount of
detergent appropriate for water hardness and the laundry.

• Too much detergent is used. >>>Use the recommended
amount of detergent appropriate for water hardness and
the laundry.

Washing performance is poor: Stains persist or the
laundry is not whitened. (**)

• Insufficient amount of detergent is used. >>>Use the
recommended amount of detergent appropriate for water
hardness and the laundry.

• Excessive laundry was loaded in. >>>Do not load the
machine in excess. Load with amounts recommended in
the "Programme and consumption table".

• Wrong programme and temperature were selected.
>>>Select the proper programme and temperature for
the laundry to be washed.

• Wrong type of detergent is used. >>>Use original detergent
appropriate for the machine.

• Too much detergent is used. >>>Put the detergent in the
correct compartment. Do not mix the bleaching agent and
the detergent with each other.

Washing performance is poor: Oily stains appeared
on the laundry. (**)

• Regular drum cleaning is not applied. >>>Clean the drum
regularly. For this, please see 4.4.2.

Washing performance is poor: Clothes smell
unpleasantly. (**)

• Odours and bacteria layers are formed on the drum as a
result of continuous washing at lower temperatures and/
or in short programmes. >>>Leave the detergent drawer
as well as the loading door of the machine ajar after each
washing. Thus, a humid environment favorable for bacteria
cannot occur in the machine.

Colour of the clothes faded. (**)

• Excessive laundry was loaded in. >>>Do not load the
machine in excess.

• Detergent in use is damp. >>> Keep detergents closed in
an environment free of humidity and do not expose them
to excessive temperatures.

• A higher temperature is selected. >>>Select the proper
programme and temperature according to the type and
soiling degree of the laundry.

It does not rinse well.

• The amount, brand and storage conditions of the detergent
used are inappropriate. >>>Use a detergent appropriate
for the washing machine and your laundry. Keep
detergents closed in an environment free of humidity and
do not expose them to excessive temperatures.

• Detergent is put in the wrong compartment. >>>If
detergent is put in the prewash compartment although
prewash cycle is not selected, machine can take this
detergent during rinsing or softener step. Put the detergent
in the correct compartment.

• Pump filter is clogged. >>>Check the filter.

• Drain hose is folded. >>>Check the drain hose.

Laundry became stiff after washing. (**)

• Insufficient amount of detergent is used. >>>Using
insufficient amount of detergent for the water hardness
can cause the laundry to become stiff in time. Use
appropriate amount of detergent according to the water
hardness.

• Detergent is put in the wrong compartment. >>>If
detergent is put in the prewash compartment although
prewash cycle is not selected, machine can take this
detergent during rinsing or softener step. Put the detergent
in the correct compartment.

• Detergent might be mixed with the softener. >>>Do not
mix the softener with detergent. Wash and clean the
dispenser with hot water.

Laundry does not smell like the softener. (**)

• Detergent is put in the wrong compartment. >>>If
detergent is put in the prewash compartment although
prewash cycle is not selected, machine can take this
detergent during rinsing or softener step. Wash and clean
the dispenser with hot water. Put the detergent in the
correct compartment.

• Detergent might be mixed with the softener. >>>Do not
mix the softener with detergent. Wash and clean the
dispenser with hot water.

Detergent residue in the detergent drawer. (**)

• Detergent is put in wet drawer. >>>Dry the detergent
drawer before putting in detergent.

• Detergent has gotten damp. >>>Keep detergents closed in
an environment free of humidity and do not expose them to
excessive temperatures.

• Water pressure is low. >>>Check the water pressure.

• The detergent in the main wash compartment got wet
while taking in the prewash water. Holes of the detergent
compartment are blocked. >>>Check the holes and clean
if they are clogged.

23 / EN

Washing Machine / User’s Manual

• There is a problem with the detergent drawer valves.
>>>Call the Authorised Service Agent.

• Detergent might be mixed with the softener. >>>Do not
mix the softener with detergent. Wash and clean the
dispenser with hot water.

• Regular drum cleaning is not applied. >>>Clean the drum
regularly. For this, please see 4.4.2.

Too much foam forms in the machine. (**)

• Improper detergents for the washing machine are being
used. >>>Use detergents appropriate for the washing
machine.

• Excessive amount of detergent is used. >>>Use only
sufficient amount of detergent.

• Detergent was stored under improper conditions. >>>Store
detergent in a closed and dry location. Do not store in
excessively hot places.

• Some meshed laundry such as tulle may foam too much
because of their texture. >>>Use smaller amounts of
detergent for this type of item.

• Detergent is put in the wrong compartment. >>>Put the
detergent in the correct compartment.

• Softener is being taken early. >>>There may be problem in
the valves or in the detergent dispenser. Call the Authorised
Service Agent.

Foam is overflowing from the detergent drawer.

• Too much detergent is used. >>>Mix 1 tablespoonful
softener and ½ l water and pour into the main wash
compartment of the detergent drawer. >>>Put detergent
into the machine suitable for the programmes and
maximum loads indicated in the “Programme and
consumption table”. When you use additional chemicals
(stain removers, bleachs and etc), reduce the amount of
detergent.

Laundry remains wet at the end of the programme.
(*)

• Excessive foam might have occurred and automatic foam
absorption system might have been activated due to too
much detergent usage. >>>Use recommended amount
of detergent.

(*) Machine does not switch to spinning step
when the laundry is not evenly distributed
in the drum to prevent any damage to the
machine and to its surrounding environment.
Laundry should be rearranged and re-spun.

(**) Regular drum cleaning is not applied. Clean
the drum regularly. See 4.4.2

A

CAUTION!

• If you cannot eliminate the problem
although you follow the instructions in
this section, consult your dealer or the
Authorised Service Agent. Never try to
repair a nonfunctional product yourself.

Cottons Cottons

Drain

(Pump)

24 / EN

Plus

Wool /

Hand Wash

Pet hair
removal

Expert

Synthetics

Eco

Fast+ Rinse

On/Off Rinse Stain

Wool /

Hand Wash

Shirts Down

Daily Xpress /

Xpress Super

creasing

Hygiene+

Short

mode

Automatic

Programme

Wear

Drum

Cleaning

TemperatureAnti

Cool

Clean

Mix Delicate Sports /

SpinPre-wash Night

Duvet /

Down Wear

No

spin

Auto

Dosing

Outdoor

Cold Rinse

Hygiene

DarkCare /

Jeans

hold

Steam

Lingerie

Time
delay

Air Refresh

(Clean&Wear)

Washing Machine / User’s Manual