Beko WMY 9048 LB1 User Manual

Washing Machine

User’s Manual

WMY 9048 LB1

2820523825/ 07-01-14.(22:22)Document Number

Please read this user manual first!

Dear Customer, Thank you for prefering an Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. If you handover the product to someone else, give the user manual as well. Follow all warnings and information in the user manual. Remember that this user manual is also applicable for several other models. Differences between models will be identified in the manual.

Explanation of symbols

Throughout this user manual the following symbols are used:

Important information or useful hints

about usage.

Warning for hazardous situations with regard to life and property.

Warning for electric shock.

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations.

Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

This product was manufactured using the latest technology in environmentally friendly conditions.

TABLE OF CONTENTS

1 Important instructions for safety and

environment 4

1.1 General safety . . . . . . . . . . . . . . . . . . . . . . .4

1.2 Intended use . . . . . . . . . . . . . . . . . . . . . . . .5

1.3 Children's safety. . . . . . . . . . . . . . . . . . . . . .6

1.4 Package information. . . . . . . . . . . . . . . . . . . 6

1.5 Disposing of the waste product . . . . . . . . . . .6

1.6 Compliance with WEEE Directive. . . . . . . . . . 7

2 Your washing machine 8

2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .8

2.2 Package Contents . . . . . . . . . . . . . . . . . . . .9

2.3 Technical specifications . . . . . . . . . . . . . . . 10

3 Installation 11

3.1 Appropriate installation location. . . . . . . . . . 11

3.2 Removing packaging reinforcement . . . . . .11

3.3 Removing the transportation locks. . . . . . . .11

3.4 Connecting water supply. . . . . . . . . . . . . . .12

3.5 Connecting to the drain. . . . . . . . . . . . . . . .13

3.6 Adjusting the feet . . . . . . . . . . . . . . . . . . . .13

3.7 Electrical connection. . . . . . . . . . . . . . . . . . 14

4 Preparation 15

4.1 Sorting the laundry . . . . . . . . . . . . . . . . . . .15

4.2 Preparing laundry for washing. . . . . . . . . . . 16

4.3 Things to be done for energy saving . . . . . .16

4.4 First use. . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.5 Correct load capacity . . . . . . . . . . . . . . . . .17

4.6 Loading the laundry . . . . . . . . . . . . . . . . . .17

4.7 Using detergent and softener . . . . . . . . . . .18

5 Operating the product 20

5.1 Control panel . . . . . . . . . . . . . . . . . . . . . . .20

5.2 Display symbols . . . . . . . . . . . . . 21

5.3 Preparing the machine . . . . . . . . . . . . . . . .22

5.4 Programme selection . . . . . . . . . . . . . . . . .22

5.5 Programmes . . . . . . . . . . . . . . . . . . . . . . .22

5.8 Temperature selection. . . . . . . . . . . . . . . . . 26

5.9 Spin speed selection. . . . . . . . . . . . . . . . . .26

5.10 Programme and consumption table. . . . . . 28

5.11 Auxiliary function selection . . . . . . . . . . . . 29

5.12 End Time . . . . . . . . . . . . . . . . . . . . . . . . .30

5.13 Starting the programme . . . . . . . . . . . . . .30

5.14 Loading door lock. . . . . . . . . . . . . . . . . . .31

5.15 Changing the selections after the

programme has started . . . . . . . . . . . . . . 31

5.16 Child Lock . . . . . . . . . . . . . . . . . . . . . . . . 31

5.17 Canceling the programme. . . . . . . . . . . . .32

5.18 End of programme . . . . . . . . . . . . . . . . . .32

5.19 Adjusting the VOLUME level . . . . . . . . . . .32

6 Maintenance and cleaning 33

6.1 Cleaning the detergent drawer . . . . . . . . . .33

6.2 Cleaning the loading door and the drum . . .33

6.3 Cleaning the body and control panel . . . . . .34

6.4 Cleaning the water intake filters . . . . . . . . .34

6.5 Draining remaining water and cleaning the

pump filter. . . . . . . . . . . . . . . . . . . . . . . . 34

7 Troubleshooting 36

3 / EN

1 Important instructions for safety and environment

This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.

1.1 General safety

• This product can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out. Children must not play with the product. Cleaning and maintenance works should not be performed by children unless they are supervised by someone.

• Never place the product on a carpet-covered floor. Otherwise, lack of airflow beneath the machine will cause electrical parts to overheat. This will cause problems with your product.

• If the product has a failure, it should not be operated unless it is repaired by the Authorized Service Agent. There is the risk of electric shock!

• This product is designed to resume operating in the event of powering on after a power interruption. If you wish to cancel the programme, see "Cancelling the programme" section.

• Connect the product to a grounded outlet protected by a 16 A fuse. Do not neglect to have the grounding installation made by a qualified electrician. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

• The water supply and draining hoses must be securely fastened and remain undamaged. Otherwise, there is the risk of water leakage.

• Never open the loading door or remove the filter while there is still water in the drum. Otherwise, risk of flooding and injury from hot water will occur.

• Do not force open the locked loading door. The loading door will be ready to open just a few minutes after the washing cycle comes to an end. In case of forcing the loading door to open, the door and the lock mechanism may get damaged.

• Unplug the product when not in use.

• Never wash the product by spreading or pouring water onto it! There is the risk of electric shock!

• Never touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug.

4 / EN

Washing Machine /User’s Manual

Important instructions for safety and environment

• Use detergents, softeners and supplements suitable for automatic washing

machines only.

• Follow the instructions on the textile tags and on the detergent package.

• The product must be unplugged during installation, maintenance, cleaning

and repairing procedures.

• Always have the installation and repairing procedures carried out by the

Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.

• If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similary qualified persons in order to avoid a hazard.

• If the power cable is damaged, it must be replaced by the manufacturer,

after sales service or a similarly qualified person (preferably an electrician) or someone designated by the importer in order to avoid possible risks.

• Place the product on a rigid, flat and level surface.

• Do not place it on a long-pile rug or similar surfaces.

• Do not place the product on a high platform or near the edge on a cascaded

surface.

• Do not place the product on the power cable.

• Never use sponge or scrub materials. These will damage the painted, chrome

plated and plastic surfaces.

1.2 Intended use

• This product has been designed for domestic use. It is not suitable for

commercial use and it must not be used out of its intended use.

• The product must only be used for washing and rinsing of laundry that are

marked accordingly.

• The manufacturer waives any responsibility arisen from incorrect usage or

transportation.

• The service life of your product is 10 years. During this period, original spare

parts will be available to operate the appliance properly.

Washing Machine /User’s Manual

5 / EN

Important instructions for safety and environment

1.3 Children's safety

• Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children.

• Electrical products are dangerous for the children. Keep children away from the product when it is in use. Do not let them to tamper with the product. Use child lock to prevent children from intervening with the product.

• Do not forget to close the loading door when leaving the room where the product is located.

• Store all detergents and additives in a safe place away from the reach of the children by closing the cover of the detergent container or sealing the detergent package.

While washing the laundry at high temperatures, the loading door glass becomes hot. Therefore, keep especially the children away from the loading door of the machine while the washing operation is in progress.

1.4 Package information

• Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

1.5 Disposing of the waste product

• This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Therefore, do not dispose the product with normal domestic waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment. Please consult your local authorities to learn the nearest collection point. Help protect the environment and natural resources by recycling used products. For children's safety, cut the power cable and break the locking mechanism of the loading door so that it will be non-functional before disposing of the product.

6 / EN

Washing Machine /User’s Manual

Important instructions for safety and environment

1.6 Compliance with WEEE Directive

This product complies with EU WEEE Directive (2012/19/EU).

This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.

Compliance with RoHS Directive:

The product you have purchased complies with EU RoHS Directive (2011/65/ EU). It does not contain harmful and prohibited materials specified in the Directive.

Washing Machine /User’s Manual

7 / EN

2 Your washing machine

2.1 Overview

1- Power cable 2- Top panel 3- Control panel 4- Drain hose

5- Loading door 6- Filter cap 7- Adjustable feet 8- Detergent drawer

8 / EN

Washing Machine /User’s Manual

Your washing machine

2.2 Package Contents

3 4

b c

1- Power cable 2- Drain hose 3- Transportation safety bolts * 4- Mains water inlet hose (One of the following filter types is used for the mains hose connection.) a- Electronic water shut-off b- Mechanical water shut-off c- Standard 5- Liquid detergent container** 6- User Manual 7- Blind plug*** 8- Plastic plug assembly * Number of transportation safety bolts may change depending on the model of your machine.

** This may be supplied with the machine depending on the model of your machine. *** This is supplied if your machine is equipped with double water inlet.

Washing Machine /User’s Manual

9 / EN

Your washing machine

2.3 Technical specifications

Models (EN) Maximum dry laundry capacity (kg) Height (cm) Width (cm)

Depth (cm) Net weight (±4 kg.) Electrical input (V/Hz) Total current (A)

Total power (W) Spin speed (rpm/ min., max.) Stand-by mode power (W) Off-mode power (W) Main model code Single Water inlet / Double Water inlet

Woolmark No:

• Available

WMY 9048 LB1

9 84 60 60 74

220-240 V / 50Hz

2000-2350

1400

0.64

0.44

958

- / •

M0000

C C C

10 / EN

“The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of machine washable wool products provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine. M0000.” “In UK, Eire, Hong Kong and India the Woolmark trade mark is a Certification trade mark.”

Technical specifications may be changed without prior notice to improve the quality of the product.

Figures in this manual are schematic and may not match the product exactly.

Values stated on the product labels or in the documentation accompanying it are obtained in laboratory conditions in accordance with the relevant standards. Depending on operational and environmental conditions of the product, these values may vary.

Washing Machine /User’s Manual

3 Installation

Refer to the nearest Authorised Service Agent for installation of the product. To make the product ready for use, review the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorized Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.

Preparation of the location and electrical, tap water and waste water installations

at the place of installation is under customer's responsibility.

WARNING: Installation and electrical

connections of the product must be carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.

WARNING: Prior to installation, visually

check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.

Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.

3.1 Appropriate installation location

• Place the machine on a rigid floor. Do not place it on a long pile rug or similar surfaces.

• Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity!

• Do not place the product on the power cable.

• Do not install the product at places where temperature may fall below 0ºC.

• Place the product at least 1 cm away from the edges of other furniture.

3.2 Removing packaging reinforcement

Tilt the machine backwards to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.

3.3 Removing the transportation locks

WARNING: Do not remove the

A A

1. Loosen all the bolts with a suitable spanner until they rotate freely (C).

2. Remove transportation safety bolts by turning them gently.

transportation locks before taking out the packaging reinforcement.

WARNING: Remove the transportation

safety bolts before operating the washing machine! Otherwise, the product will be damaged.

Washing Machine /User’s Manual

11 / EN

Installation

3. Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel. (P)

Keep the transportation safety bolts in a safe place to reuse when the washing

C C

3.4 Connecting water supply

machine needs to be moved again in the future.

Never move the product without the transportation safety bolts properly fixed in place!

The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa). It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher.

If you are going to use the double waterinlet product as a single (cold) water-inlet

unit, you must install the supplied stopper to the hot water valve before operating the product. (Applies for the products supplied with a blind stopper group.)

WARNING: Models with a single water

inlet should not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate.

WARNING: Do not use old or used water

inlet hoses on the new product. It may cause stains on your laundry.

hose (left) (max. 90 ºC) is for hot water inlet, blue hose (right) (max. 25 ºC) is for cold water inlet.

WARNING: Ensure that the cold and

2. Tighten all hose nuts by hand. Never use a tool when tightening the nuts.

3. Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use.

hot water connections are made correctly when installing the product. Otherwise, your laundry will come out hot at the end of the washing process and wear out.

1. Connect the special hoses supplied with the product to the water inlets on the product. Red

12 / EN

Washing Machine /User’s Manual

+ 28 hidden pages