Beko WMB 651441 L User Manual

Washing Machine
User’s Manual
WMB 651441 L
Document Number
2820522802_EN/161012.1544
Please read this user manual first!
The user manual will help you use your machine in a fast and safe way.
• Read the user manual before installing and starting your product.
• Always follow the safety instructions.
• Keep this user manual within easy reach for future reference.
• Read also the other documents supplied with the product. Remember that this user manual is also applicable for several other models. Differences
between models will be identified in the manual.
Explanation of symbols
Throughout this user manual the following symbols are used:
C Important information or useful hints about usage. A Warning for hazardous situations with regard to life and property. B Warning for electric shock.
WARNING! There is silikagel package inside the drum.Granules in this
A
package do not contain poisonous or harmful materials. It is not a detergent and it is not edible.Do not swallow.Do not use for any purpose. Throw into therecycle bintogether with its package before the first usage of the washing maschine.
Allergy UK is the operational name of The British Allergy Foundation. The Seal of Approval endorsement, which indicates that the product bearing
it specifically restricts / reduces / removes allergens from the environment of the allergy sufferer or has significantly reduced allergen content, was created in order to provide guidance for people seeking advice in this issue. It is aimed to assure poeple that products had been scientifically tested or reviewed with measurable results.
This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose. Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment.
2
EN
TABLE OF CONTENTS
1 Your washing machine 4
Overview . . . . . . . . . . . . . . . . . . . . . . . . 4
Technical specifications . . . . . . . . . . . . . 5
2 Important safety instructions 6
General safety . . . . . . . . . . . . . . . . . . . . 6
Intended use . . . . . . . . . . . . . . . . . . . . . 6
Children's safety . . . . . . . . . . . . . . . . . . 7
3 Installation 8
Appropriate installation location . . . . . . . 8
Removing packaging reinforcement. . . . 8
Removing the transportation locks. . . . . 8
Connecting water supply . . . . . . . . . . . . 9
Connecting to the drain . . . . . . . . . . . . . 9
Adjusting the feet. . . . . . . . . . . . . . . . . 10
Electrical connection . . . . . . . . . . . . . . 10
First use . . . . . . . . . . . . . . . . . . . . . . . 11
Disposing of packaging material . . . . . 11
Transportation of the product. . . . . . . . 11
Disposing of the old product . . . . . . . . 11
4 Preparation 12
Things to be done for energy saving . . 12
Sorting the laundry . . . . . . . . . . . . . . . 12
Preparing laundry for washing . . . . . . . 12
Correct load capacity . . . . . . . . . . . . . 13
Loading the laundry. . . . . . . . . . . . . . . 13
Using detergent and softener . . . . . . . 14
Tips for efficient washing . . . . . . . . . . . 16
Main programmes . . . . . . . . . . . . . . . 18
Additional programmes . . . . . . . . . . . . 19
Temperature selection . . . . . . . . . . . . . 20
Spin speed selection . . . . . . . . . . . . . . 20
Programme and consumption table. . . 21
Auxiliary function selection . . . . . . . . . . 23
Time display . . . . . . . . . . . . . . . . . . . . 24
Starting the programme. . . . . . . . . . . . 24
Progress of programme. . . . . . . . . . . . 24
Loading door lock . . . . . . . . . . . . . . . . 25
Changing the selections after programme
has started . . . . . . . . . . . . . . . . . . . . . 25
Child Lock . . . . . . . . . . . . . . . . . . . . . . 25
Cancelling the programme. . . . . . . . . . 26
Machine is in Rinse Hold mode . . . . . . 26
End of programme . . . . . . . . . . . . . . . 26
6 Maintenance and cleaning 27
Cleaning the detergent drawer. . . . . . . 27
Cleaning the loading door and the
drum . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Cleaning the body and control panel . . 27
Cleaning the water intake filters . . . . . . 28
Draining remaining water and cleaning the
pump filter . . . . . . . . . . . . . . . . . . . . . . 28
7 Troubleshooting 30
5 Operating the product 17
Control panel. . . . . . . . . . . . . . . . . . . . 17
Display symbols. . . . . . . . . . . . . . . . . . 18
Preparing the machine. . . . . . . . . . . . . 18
Programme selection. . . . . . . . . . . . . . 18
3
EN
1 Your washing machine
7
3
4
6
5
2
1
Overview
8
1- Power cable 2- Top panel 3- Control panel
4- Filter cap
5- Adjustable feet
6- Loading door 7- Detergent drawer 8- Drain hose
4
EN
Technical specifications
Models (EN) Maximum dry laundry capacity (kg) Height (cm) Width (cm)
Depth (cm) Net weight (±4 kg.) Electrical input (V/Hz)
Total current (A)
Total power (W) Spin speed (rpm max.) Main model code Single Water inlet / Double Water inlet
Woolmark No:
• Available
WMB 651441 L
6.5
84
60
59
72
220-240 V / 50Hz
10
2000-2300
1400
918
• / -
M1228
“The Wool wash cycle of this machine has been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” provided that the garments are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine.”
“In UK, Eire, Hong Kong and India the Woolmark trade mark is a Certification
trade mark.”
Technical specifications may be changed without prior notice to improve the quality of
C
the product.
Figures in this manual are schematic and may not match the product exactly.
C
Values stated on the product labels or in the documentation accompanying it
C
are obtained in laboratory conditions in accordance with the relevant standards. Depending on operational and environmental conditions of the product, these values may vary.
5
EN
2 Important safety instructions
This section contains safety instructions that will help protect from risk of personal
injury or property damage. Failure to follow
these instructions shall void any warranty.
General safety
• This product should not be used
by persons with physical, sensory or mental disorders or unlearned or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product.
• 8 years and older children and people
with reduced physical, sensory, and mental abilities as well as unskilled or inexperienced persons can use this appliance provided that they are supervised and instructed on safe use of the appliance as well as to the related dangers. Children should not play or tamper with the appliance. Cleaning and user maintenance should never be performed by children unless supervised by a responsible adult.
• Never place the product on a carpet-
covered floor; otherwise, lack of airflow beneath the machine will cause electrical parts to overheat. This will cause problems with your product.
• Do not operate the product if the
power cable / plug is damaged. Call a qualified electrician.
• Have a qualified electrician connect a 16-Ampere fuse to the installation
location of the product.
• If the product has a failure, it should not
be operated unless it is repaired by the
Authorized Service Agent. There is the
risk of electric shock!
• This product is designed to resume
operating in the event of powering on after a power interruption. If you wish to cancel the programme, see "Cancelling the programme" section.
• Connect the product to a grounded
outlet protected by a fuse complying with the values in the "Technical specifications" table. Do not neglect to have the grounding installation made
by a qualified electrician. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.
• The water supply and draining hoses
must be securely fastened and remain undamaged. Otherwise, there is the risk of water leakage.
• Never open the loading door or remove
the filter while there is still water in the drum. Otherwise, risk of flooding and
injury from hot water will occur.
• Do not force open the locked loading
door. The loading door will be ready
to open just a few minutes after the
washing cycle comes to an end. In case of forcing the loading door to open, the door and the lock mechanism may get damaged.
• Unplug the product when not in use.
• Never wash the product by spreading
or pouring water onto it! There is the risk of electric shock!
• Never touch the plug with wet hands!
Never unplug by pulling on the cable, always pull out by grabbing the plug.
• Use detergents, softeners and
supplements suitable for automatic washing machines only.
• Follow the instructions on the textile
tags and on the detergent package.
• The product must be unplugged during
installation, maintenance, cleaning and repairing procedures.
• Always have the installation and
repairing procedures carried out
by the Authorized Service Agent.
Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
Intended use
• This product has been designed for
domestic use. It is not suitable for commercial use and it must not be used out of its intended use.
• The product must only be used for
washing and rinsing of laundry that are marked accordingly.
6
EN
• The manufacturer waives any
responsibility arisen from incorrect usage or transportation.
Children's safety
• Electrical products are dangerous for the children. Keep children away from
the product when it is in use. Do not let them to tamper with the product.
Use child lock to prevent children from
intervening with the product.
• Do not forget to close the loading
door when leaving the room where the product is located.
• Store all detergents and additives in a
safe place away from the reach of the children.
7
EN
3 Installation
It is the customers responsibility to arrange a suitably qualified installer to correctly install this product. To make the product ready for use, review the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the qualified Installer. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.
Preparation of the location and
C
electrical, tap water and waste water installations at the place of installation is under customer's responsibility.
Installation and electrical connections
B
of the product must be carried out by a qualified installer. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
Prior to installation, visually check if
A
the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.
Make sure that the water inlet and
C
discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.
Appropriate installation location
• Place the machine on a rigid floor. Do
not place it on a long pile rug or similar surfaces.
• Total weight of the washing machine
and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity!
• Do not place the product on the power
cable.
• Do not install the product at places
where temperature may fall below 0ºC.
• Place the product at least 1 cm away
from the edges of other furniture.
Removing packaging reinforcement
Tilt the machine backwards to remove
the packaging reinforcement. Remove the
packaging reinforcement by pulling the ribbon.
Removing the transportation locks
Do not remove the transportation
A
locks before taking out the packaging reinforcement.
Remove the transportation safety
A
bolts before operating the washing machine, otherwise, the product will be damaged.
1. Loosen all the bolts with a spanner until they rotate freely (C).
2. Remove transportation safety bolts by
turning them gently.
8
EN
3. Attach the plastic covers supplied in the User Manual bag into the holes on
the rear panel. (P)
Keep the transportation safety bolts in
C
a safe place to reuse when the washing machine needs to be moved again in the future.
Never move the product without the
C
transportation safety bolts properly fixed in place!
Connecting water supply
The water supply pressure required
C
to run the product is between 1 to 10 bars (0.1 – 1 MPa). It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly.
Attach a pressure reducing valve if
water pressure is higher.
If you are going to use the double
C
water-inlet product as a single (cold) water-inlet unit, you must install the supplied stopper to the hot water valve
before operating the product. (Applies
for the products supplied with a blind stopper group.)
If you want to use both water inlets
C
of the product, connect the hot water hose after removing the stopper and gasket group from the hot water valve.
(Applies for the products supplied with
a blind stopper group.)
Models with a single water inlet should
A
not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate.
Do not use old or used water inlet
A
hoses on the new product. It may cause stains on your laundry.
1. Connect the special hoses supplied with the product to the water inlets
on the product. Red hose (left) (max.
90 ºC) is for hot water inlet, blue hose (right) (max. 25 ºC) is for cold water inlet.
Ensure that the cold and hot water
A
connections are made correctly when installing the product. Otherwise, your laundry will come out hot at the end of the washing process and wear out.
2. Tighten all hose nuts by hand. Never use a wrench when tightening the nuts.
3. Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leaks occur, turn off the tap and
remove the nut. Retighten the nut
carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use.
Connecting to the drain
• The end of the drain hose must be
directly connected to the wastewater drain or to the washbasin.
Your house will be flooded if the
A
hose comes out of its housing during water discharge. Moreover, there is risk of scalding due to high washing temperatures! To prevent such situations and to ensure smooth water intake and discharge of the machine, fix the end of the discharge hose tightly so that it cannot come out.
• The hose should be attached to a
height of at least 60 cm, and 90 cm at most.
9
EN
• In case the hose is elevated after
laying it on the floor level or close to the ground (less than 60 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure.
the hose must not be pinched between the drain and the machine.
• If the length of the hose is too short,
use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.
Adjusting the feet
In order to ensure that the product
A
operates more silent and vibration-free, it must stand level and balanced on its
feet. Balance the machine by adjusting
the feet. Otherwise, the product may move from its place and cause crushing and vibration problems.
• To prevent flowing of dirty water back
into the machine and to allow for easy discharge, do not immerse the hose end into the dirty water or drive it in the drain more than 15 cm. If it is too long, cut it short.
• The end of the hose should not be
bent, it should not be stepped on and
10
1. Loosen the lock nuts on the feet by hand.
2. Adjust the feet until the product stands
level and balanced.
3. Tighten all lock nuts again by hand.
Do not use any tools to loosen the lock
A
nuts. Otherwise, they will get damaged.
Electrical connection
Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical specifications" table. Our company shall not be liable for any damages that will arise when the
EN
product is used without grounding in accordance with the local regulations.
• Connection must comply with national
regulations.
• Power cable plug must be within easy
reach after installation.
• The voltage and allowed fuse or
breaker protection are specified in the “Technical specifications” section. If the current value of the fuse or breaker in
the house is less than 16 Amps, have a qualified electrician install a 16 Amp
fuse.
• The specified voltage must be equal to
your mains voltage.
• Do not make connections via extension
cables or multi-plugs.
Damaged power cables must be
B
replaced by the Authorized Service Agents.
First use
Before starting to use the product, make
sure that all preparations are made in accordance with the instructions in sections "Important safety instructions" and "Installation". To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If your machine is not featured with Drum Cleaning programme, use Cottons-90 programme and select
Additional Water or Extra Rinse auxiliary functions as well. Before starting the
programme, put max. 100 g of powder anti-limescale into the main wash detergent compartment (compartment nr. II). If the anti-limescale is in tablet form, put only one tablet into compartment nr. II. Dry the inside of the bellow with a clean piece of cloth after the programme has come to an end.
Some water might have remained in
C
the product due to the quality control processes in the production. It is not harmful for the product.
Disposing of packaging material
Packaging materials are dangerous to
children. Keep packaging materials in a
safe place away from reach of the children. Packaging materials of the product are manufactured from recyclable materials. Dispose of them properly and sort in accordance with recycled waste instructions. Do not dispose of them with normal domestic waste.
Transportation of the product
1. Unplug the product before transporting
it.
2. Remove water drain and water supply
connections.
3. Drain the remaining water in the product completely; see, "Draining remaining water and cleaning the pump filter".
4. Install transportation safety bolts in the reverse order of removal procedure;
see, "Removing the transportation
locks".
Never move the product without the
C
transportation safety bolts properly fixed in place!
Disposing of the old product
Dispose of the old product in an environmentally friendly manner.
Refer to your local dealer or solid waste
collection centre in your area to learn how to dispose of your product.
For children's safety, cut the power cable
and break the locking mechanism of the loading door so that it will be nonfunctional before disposing of the product.
Use an anti-limescale suitable for the
C
washing machines.
11
EN
Loading...
+ 25 hidden pages