Beko WMB 61221 PTM, WMB 60821 M User manual [EN,BG]

0 (0)
Beko WMB 61221 PTM, WMB 60821 M User manual

Washing Machine

User’s Manual

WMB 61221 PTM

WMB 60821 M

EN BG

Document Number= 2820522664_EN/080915.1719

This product was manufactured using the latest technology in environmentally friendly conditions.

Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility.
Installation and electrical connections of the product must be carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.
Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.

1 Important safety instructions

This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.

General safety

8 years and older children and people with reduced physical, sensory, and mental abilities as well as unskilled or inexperienced persons can use this appliance provided that they are supervised and instructed on safe use of the appliance as well as to the related dangers. Children should not play or tamper with the appliance. Cleaning and user maintenance should never be performed by children unless supervised by a responsible adult.

Never place the product on a carpet-covered floor; otherwise, lack of airflow beneath the machine will cause electrical parts to overheat. This will cause problems with your product.

Do not operate the product if the power cable / plug is damaged. Call the Authorized Service Agent.

Have a qualified electrician connect a 16-Ampere fuse to the installation location of the product.

If the product has a failure, it should not be operated unless it is repaired by the Authorized Service Agent.

There is the risk of electric shock!

This product is designed to resume operating in the event of powering on after a power interruption. If you wish to cancel the programme, see "Cancelling the programme" section.

Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical specifications" table. Do not neglect to have the grounding installation made by a qualified electrician. Our company shall not be liable for any damages that

will arise when the product is used without grounding in accordance with the local regulations.

The water supply and draining hoses must be securely fastened and remain undamaged. Otherwise, there is the risk of water leakage.

Never open the loading door or remove the filter while there is still water in the drum. Otherwise, risk of flooding and injury from hot water will occur.

Do not force open the locked loading door. The loading door will be ready to open just a few minutes after the washing cycle comes to an end. In case of forcing the loading door to open, the door and the lock mechanism may get damaged.

Unplug the product when not in use.

Never wash the product by spreading or pouring water onto it! There is the risk of electric shock!

Never touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug.

Use detergents, softeners and supplements suitable for automatic washing machines only.

Follow the instructions on the textile tags and on the detergent package.

The product must be unplugged during installation, maintenance, cleaning and repairing procedures.

3

Always have the installation and repairing procedures carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.

Intended use

This product has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use.

The product must only be used for washing and rinsing of laundry that are marked accordingly.

The manufacturer waives any responsibility arisen from incorrect usage or transportation.

Children's safety

Electrical products are dangerous for the children. Keep children away from the product when it is in use. Do not let them to tamper with the product. Use child lock to prevent children from intervening with the product.

Do not forget to close the loading door when leaving the room where the product is located.

Store all detergents and additives in a safe place away from the reach of the children.

2 Installation

Refer to the nearest Authorised Service Agent for installation of the product. To make the product ready for use, review the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are

appropriate before calling the Authorized Service Agent. If they are not, call a qualified technician and plumber to have any

necessary arrangements carried out.

C

B

A

C

Appropriate installation location

Place the machine on a rigid floor. Do not place it on a long pile rug or similar surfaces.

Total weight of the washing machine and the dryer -with full loadwhen they are placed on top of each other reaches to approx. 180 kilograms. Place the product

on a solid and flat floor that has sufficient load carrying capacity!

Do not place the product on the power cable.

Do not install the product at places where temperature may fall below 0ºC.

Place the product at least 1 cm away from the edges of other furniture.

EN

Removing packaging reinforcement

Tilt the machine backwards to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.

Removing the transportation locks

A Do not remove the transportation locks before taking out the packaging reinforcement.

A Remove the transportation safety bolts before operating the washing machine, otherwise, the product will be damaged.

1.Loosen all the bolts with a spanner until they rotate freely (C).

2.Remove transportation safety bolts by turning them gently.

3.Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel. (P)

C

Keep the transportation safety bolts in a safe place to

 

reuse when the washing machine needs to be moved

C

again in the future.

Never move the product without the transportation

 

safety bolts properly fixed in place!

Connecting water supply

C

The water supply pressure required to run the product

 

is between 1 to 10 bars (0.1 – 1 MPa). It is necessary

 

to have 10 – 80 liters of water flowing from the fully

 

open tap in one minute to have your machine run

 

smoothly. Attach a pressure reducing valve if water

C

pressure is higher.

If you are going to use the double water-inlet product

 

as a single (cold) water-inlet unit, you must install the

 

supplied stopper to the hot water valve before operating

 

the product. (Applies for the products supplied with a

C

blind stopper group.)

If you want to use both water inlets of the product,

 

connect the hot water hose after removing the stopper

and gasket group from the hot water valve. (Applies for the products supplied with a blind stopper group.)

A Models with a single water inlet should not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate.

A Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.

1.Connect the special hoses supplied with the product to the water inlets on the product. Red hose (left) (max. 90 ºC) is for hot water inlet, blue hose (right) (max. 25 ºC) is for cold water inlet.

A Ensure that the cold and hot water connections are made correctly when installing the product. Otherwise, your laundry will come out hot at the end of the washing process and wear out.

2.Tighten all hose nuts by hand. Never use a wrench when tightening the nuts.

3.Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use.

Connecting to the drain

• The end of the drain hose must be directly connected to the wastewater drain or to the washbasin.

A Your house will be flooded if the hose comes out of its housing during water discharge. Moreover, there is risk of scalding due to high washing temperatures! To prevent such situations and to ensure smooth water

intake and discharge of the machine, fix the end of the discharge hose tightly so that it cannot come out.

The hose should be attached to a height of at least 40 cm, and 100 cm at most.

In case the hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure.

<![if ! IE]>

<![endif]>100cm 40cm

4 EN

To prevent flowing of dirty water back into the machine and to allow for easy discharge, do not immerse the hose end into the dirty water or drive it in the drain more than 15 cm. If it is too long, cut it short.

The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the machine.

If the length of the hose is too short, use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.

Adjusting the feet

A In order to ensure that the product operates more silent and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet.

Otherwise, the product may move from its place and cause crushing and vibration problems.

1.Loosen the lock nuts on the feet by hand.

2.Adjust the feet until the product stands level and balanced.

3.Tighten all lock nuts again by hand.

A Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.

Electrical connection

Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical specifications" table. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

Connection must comply with national regulations.

5

• Power cable plug must be within easy reach after installation.

• The voltage and allowed fuse or breaker protection are specified in the “Technical specifications” section. If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16 Amp fuse.

• The specified voltage must be equal to your mains voltage.

• Do not make connections via extension cables or multiplugs.

B Damaged power cables must be replaced by the Authorized Service Agents.

First use

Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections "Important safety instructions" and "Installation". To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If your machine is

not featured with Drum Cleaning programme, use Cottons-90 programme and select Additional Water or Extra Rinse auxiliary functions as well. Before starting the programme, put max. 100 g of powder anti-limescale into the main

wash detergent compartment (compartment nr. II). If the anti-limescale is in tablet form, put only one tablet into compartment nr. II. Dry the inside of the bellow with a clean piece of cloth after the programme has come to an end.

C

Use an anti-limescale suitable for the washing

C

machines.

Some water might have remained in the product due to

 

the quality control processes in the production. It is not

 

harmful for the product.

Disposing of packaging material

Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children.

Packaging materials of the product are manufactured from recyclable materials. Dispose of them properly and sort in accordance with recycled waste instructions. Do not dispose of them with normal domestic waste.

Transportation of the product

Unplug the product before transporting it. Remove water drain and water supply connections. Drain the remaining water in the product completely; see, "Draining remaining water and cleaning the pump filter". Install transportation safety bolts in the reverse order of removal procedure; see, "Removing the transportation locks".

EN

C

Never move the product without the transportation

 

safety bolts properly fixed in place!

Disposing of the old product

Dispose of the old product in an environmentally friendly manner.

Refer to your local dealer or solid waste collection centre in your area to learn how to dispose of your product.

For children's safety, cut the power cable and break the locking mechanism of the loading door so that it will be nonfunctional before disposing of the product.

3 Preparation

Things to be done for energy saving

Following information will help you use the product in an ecological and energy-efficient manner.

Operate the product in the highest capacity allowed by the programme you have selected, but do not overload; see, "Programme and consumption table".

Always follow the instructions on the detergent packaging.

Wash slightly soiled laundry at low temperatures.

Use faster programmes for small quantities of lightly soiled laundry.

Do not use prewash and high temperatures for laundry that is not heavily soiled or stained.

If you plan to dry your laundry in a dryer, select the highest spin speed recommended during washing process.

Do not use detergent in excess of the amount recommended on the detergent package.

Sorting the laundry

Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature.

Always obey the instructions given on the garment tags.

Preparing laundry for washing

Laundry items with metal attachments such as, underwired bras, belt buckles or metal buttons will damage the machine. Remove the metal pieces or wash the clothes by putting them in a laundry bag or pillow case.

Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets inside out and brush. Such objects may damage the product or cause noise problem.

Put small size clothes such as infant's socks and nylon stockings in a laundry bag or pillow case.

Place curtains in without compressing them. Remove curtain attachment items.

Fasten zippers, sew loose buttons and mend rips and tears.

Wash “machine washable” or “hand washable” labeled products only with an appropriate programme.

Do not wash colours and whites together. New, dark coloured cottons release a lot of dye. Wash them separately.

Tough stains must be treated properly before washing. If unsure, check with a dry cleaner.

Use only dyes/colour changers and limescale removers suitable for machine wash. Always follow the

6

instructions on the package.

Wash trousers and delicate laundry turned inside out.

Keep laundry items made of Angora wool in the freezer for a few hours before washing. This will reduce pilling.

Laundry that are subjected to materials such as flour, lime dust, milk powder, etc. intensely must be shaken off before placing into the machine. Such dusts and powders on the laundry may build up on the inner parts of the machine in time and can cause damage.

Correct load capacity

The maximum load capacity depends on the type of laundry, the degree of soiling and the washing programme desired. The machine automatically adjusts the amount of water according to the weight of the loaded laundry.

A Follow the information in the “Programme and consumption table”. When overloaded, machine's washing performance will drop. Moreover, noise and vibration problems may occur.

Loading the laundry

Open the loading door.

Place laundry items loosely into the machine.

Push the loading door to close until you hear a locking

C

sound. Ensure that no items are caught in the door.

The loading door is locked while a programme is

 

running. The door can only be opened a while after the

 

programme comes to an end.

A In case of misplacing the laundry, noise and vibration problems may occur in the machine.

Using detergent and softener

Detergent Drawer

The detergent drawer is composed of three compartments:

-(1) for prewash

-(2) for main wash

– (3) for softener

– (*) in addition, there is siphon piece in the softener compartment.

2 3 1

Detergent, softener and other cleaning agents

Add detergent and softener before starting the washing programme.

Never open the detergent drawer while the washing programme is running!

When using a programme without prewash, do not put any detergent into the prewash compartment (compartment nr. I).

In a programme with prewash, do not put liquid detergent into the prewash compartment (compartment nr. I).

Do not select a programme with prewash if you are using a detergent bag or dispensing ball. Place the detergent bag or the dispensing ball directly among the

EN

Use only detergents manufactured specifically for washing machines.

laundry in the machine.

If you are using liquid detergent, do not forget to place the liquid detergent cup into the main wash

compartment (compartment nr. II).

Choosing the detergent type

The type of detergent to be used depends on the type and colour of the fabric.

• Use different detergents for coloured and white laundry.

• Wash your delicate clothes only with special detergents (liquid detergent, wool shampoo, etc.) used solely for delicate clothes.

• When washing dark coloured clothes and quilts, it is recommended to use liquid detergent.

• Wash woolens with special detergent made specifically A for woolens.

A Do not use soap powder.

Adjusting detergent amount

The amount of washing detergent to be used depends on the amount of laundry, the degree of soiling and water hardness. Read the manufacturer's instructions on the detergent package carefully and follow the dosage values.

Do not use amounts exceeding the dosage quantities recommended on the detergent package to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental protection.

Use lesser detergent for small amounts or lightly soiled clothes.

Use concentrated detergents in the recommended

dosage.

Using softeners

Pour the softener into the softener compartment of the detergent drawer.

Use the dosages recommended on the package.

Do not exceed the (>max<) level marking in the softener compartment.

If the softener has lost its fluidity, dilute it with water before putting it in the detergent drawer.

Using liquid detergents

If the product contains a liquid detergent cup:

Make sure that you have placed the liquid detergent cup in compartment nr. “2”.

Use the detergent manufacturer's measuring cup and follow the instructions on the package.

Use the dosages recommended on the package.

If the liquid detergent has lost its fluidity, dilute it with water before putting in the detergent cup.

If the product does not contain a liquid detergent cup:

Do not use liquid detergent for the prewash in a programme with prewash.

Use the detergent manufacturer's measuring cup and follow the instructions on the package.

Liquid detergent stains your clothes when used with

Delayed Start function. If you are going to use the Delayed Start function, do not use liquid detergent.

Using gel and tablet detergent

When using tablet, gel, etc. detergents, read the manufacturer's instructions on the detergent package carefully and follow the dosage values. If there is not any instruction on the package, apply the following.

If the gel detergent thickness is fluidal and your

 

machine does not contain a special liquid detergent

 

cup, put the gel detergent into the main wash detergent

 

compartment during first water intake. If your machine

 

contains a liquid detergent cup, fill the detergent into

 

this cup before starting the programme.

If the gel detergent thickness is not fluidal or in the

 

shape of capsule liquid tablet, put it directly into the

 

drum before washing.

Put tablet detergents into the main wash compartment

 

(compartment nr. II) or directly into the drum before

C

washing.

Tablet detergents may leave residues in the detergent

 

compartment. If you encounter such a case, place the

 

tablet detergent between the laundry, close to the lower

C

part of the drum in future washings.

Use the tablet or gel detergent without selecting the

 

prewash function.

Using starch

Add liquid starch, powder starch or the dyestuff into the softener compartment as instructed on the package.

Do not use softener and starch together in a washing cycle.

Wipe the inside of the machine with a damp and clean cloth after using starch.

Using bleaches

Select a programme with prewash and add the bleaching agent at the beginning of the prewash. Do not put detergent in the prewash compartment. As an alternative application, select a programme with extra rinse and add the bleaching agent while the machine is taking water from the detergent compartment during first rinsing step.

Do not use bleaching agent and detergent by mixing them.

Use just a little amount (approx. 50 ml) of bleaching agent and rinse the clothes very well as it causes skin irritation. Do not pour the bleaching agent onto the clothes and do not use it for coloured clothes.

When using oxygen based bleaches, follow the instructions on the package and select a programme that washes at a lower temperature.

Oxygen based bleaches can be used together with detergents; however, if its thickness is not the same with the detergent, put the detergent first into the compartment nr. “2” in the detergent drawer and wait

7 EN

until the detergent flows while the machine is taking in water. Add the bleaching agent from the same compartment while the machine is still taking in water.

Using limescale remover

When required, use limescale removers manufactured specifically for washing machines only.

Always follow instructions on the package.

Tips for efficient washing

 

 

 

Clothes

 

 

 

 

Light colours and whites

Colors

Dark colors

Delicates/Woolens/

 

 

Silks

 

 

 

 

 

 

 

 

 

 

 

 

 

(Recommended temperature

(Recommended temperature

(Recommended

(Recommended

 

 

temperature range

temperature range

 

 

range based on soiling level:

range based on soiling level:

 

 

based on soiling level:

based on soiling level:

 

 

40-90C)

cold-40C)

 

 

cold-40C)

cold-30C)

 

 

 

 

 

 

 

 

 

 

 

 

It may be necessary to pre-

Powder and liquid detergents

 

 

 

 

treat the stains of perform

 

 

 

 

recommended for colours

 

 

 

 

prewash. Powder and liquid

 

 

 

 

can be used at dosages

Liquid detergents

Prefer liquid detergents

 

Heavily Soiled

detergents recommended

 

recommended for heavily soiled

suitable for colours

produced for delicate

 

 

for whites can be used at

 

 

clothes. It is recommended

and dark colours can

clothes. Woollen and

 

(difficult stains such

dosages recommended for

 

to use powder detergents to

be used at dosages

silk clothes must be

 

as grass, coffee, fruits

heavily soiled clothes. It is

 

clean clay and soil stains and

recommended for

washed with special

 

and blood.)

recommended to use powder

 

 

detergents to clean clay and

the stains that are sensitive

heavily soiled clothes.

woollen detergents.

 

 

to bleaches. Use detergents

 

 

 

 

soil stains and the stains that

 

 

 

 

without bleach.

 

 

 

 

are sensitive to bleaches.

 

 

 

 

 

 

 

<![if ! IE]>

<![endif]>Level

 

 

 

 

 

 

 

 

 

 

<![if ! IE]>

<![endif]>Soiling

Normally Soiled

Powder and liquid detergents

Powder and liquid detergents

Liquid detergents

Prefer liquid detergents

recommended for colours

suitable for colours

produced for delicate

 

 

recommended for whites

can be used at dosages

and dark colours can

clothes. Woollen and

 

(For example, stains

can be used at dosages

 

recommended for normally

be used at dosages

silk clothes must be

 

caused by body on

recommended for normally

 

soiled clothes. Use detergents

recommended for

washed with special

 

collars and cuffs)

soiled clothes.

 

without bleach.

normally soiled clothes.

woollen detergents.

 

 

 

 

 

 

 

 

 

 

 

Powder and liquid detergents

Powder and liquid detergents

Liquid detergents

Prefer liquid detergents

 

Lightly Soiled

recommended for colours

suitable for colours

produced for delicate

 

 

recommended for whites

can be used at dosages

and dark colours can

clothes. Woollen and

 

 

can be used at dosages

 

(No visible stains

recommended for lightly soiled

be used at dosages

silk clothes must be

 

recommended for lightly

 

exist.)

clothes. Use detergents without

recommended for lightly

washed with special

 

soiled clothes.

 

 

bleach.

soiled clothes.

woollen detergents.

 

 

 

 

 

 

 

 

 

8 EN

4 Operating the product

Control panel

1

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

4

5

6

7

1

- Programme Selection knob (Uppermost position On/Off)

5

- Auxiliary Function buttons

 

2

- Programme Follow-up indicator

6

- Delayed Start button (in some models)

3

- Temperature Adjustment button

7

- Start / Pause button

 

 

4

- Spin Speed adjustment button

 

 

 

 

 

Preparing the machine

Make sure that the hoses are connected tightly. Plug in your machine. Turn the tap on completely. Place the laundry in the machine. Add detergent and fabric softener.

Programme selection

1.Select the programme suitable for the type, quantity and soiling degree of the laundry in accordance with the "Programme and consumption table" and the temperature table below.

90˚C

Heavily soiled white cottons and linens.

(coffee table covers, tableclothes, towels, bed

 

 

sheets, etc.)

 

Normally soiled, coloured, fade proof cottons

60˚C

or synthetic clothes (shirt, nightgown,

 

pajamas, etc.) and lightly soiled white linens

 

(underwear, etc.)

40˚C-

Blended laundry including delicate textile (veil

30˚C- Cold

curtains, etc.), synthetics and woolens.

2.

Select the desired programme with the Programme

C

Selection button.

Programmes are limited with the highest spin speed

C

appropriate for that particular type of fabric.

When selecting a programme, always consider the type

 

of fabric, colour, degree of soiling and permissible water

C

temperature.

Always select the lowest required temperature. Higher

C

temperature means higher power consumption.

For further programme details, see "Programme and

 

consumption table".

 

9

Main programmes

Depending on the type of fabric, use the following main programmes.

• Cottons

Use this programme for your cotton laundry (such as bed sheets, duvet and pillowcase sets, towels, bathrobes, underwear, etc.). Your laundry will be washed with vigorous washing action for a longer washing cycle.

• Synthetics

Use this programme to wash your synthetic clothes (shirts, blouses, synthetic/cotton blends, etc.). It washes with a gentle action and has a shorter washing cycle compared to the Cottons programme.

For curtains and tulle, use the Synthetic 40˚C programme with prewash and anti-creasing functions selected. As their meshed texture causes excessive foaming, wash the veils/ tulle by putting little amount of detergent into the main wash compartment. Do not put detergent in the prewash compartment.

• Woollens

Use this programme to wash your woolen clothes. Select the appropriate temperature complying with the tags of your clothes. Use appropriate detergents for woolens.

Additional programmes

For special cases, additional programmes are available in the machine.

C Additional programmes may differ according to the model of the machine.

• Cotton Economic

You may wash your normally soiled durable cotton and linen laundry in this programme with the highest energy

EN

and water saving compared to all other wash programmes suitable for cottons. Actual water temperature may differ from the declared cycle temperature. Programme duration may automatically be shortened during later stages of the programme if you wash less amount (e.g. ½ capacity or less) of laundry. In this case energy and water consumption will be further decreased giving you the opportunity for a more economical wash. This feature is available for certain models

having remaining time display.

• BabyProtect

Use this programme for baby clothes and clothes worn by allergic people. Increased hygiene is provided by a longer heating period and an additional rinse cycle.

• Hand wash

Use this programme to wash your woolen/delicate clothes that bear “not machinewashable” tags and for which hand wash is recommended. It washes laundry with a very gentle washing action to not to damage clothes.

• Daily express

Use this programme to quickly wash your lightly soiled cotton clothes.

• Darkwash

Use this programme to wash your dark coloured laundry, or the coloured laundry that you do not want them get faded. Washing is performed with less mechanical movements at low temperature. It is recommended to use liquid detergent or wool shampoo for dark coloured laundry.

• Mixed 40 (Mix 40)

Use this programme to wash your cotton and synthetic clothes together without sorting them.

Special programmes

For specific applications, select any of the following programmes.

• Rinse

Use this programme when you want to rinse or starch separately.

• Spin + Drain

Use this programme to apply an additional spin cycle for your laundry or to drain the water in the machine.

Before selecting this programme, select the desired spin speed and press Start / Pause button. First, the machine will drain the water inside of it. Then, it will spin the laundry with the set spin speed and drain the water coming out of them. If you wish to drain only the water without spinning your laundry, select the Pump+Spin programme and then select

the No Spin function with the help of Spin Speed Adjustment

button. Press Start / Pause button.

C

Use a lower spin speed for delicate laundries.

Temperature selection

Whenever a new programme is selected, the recommended temperature for the selected programme appears on the temperature indicator.

To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease gradually.

C If the programme has not reached the heating step, you can change the temperature without switching the machine to Pause mode.

Spin speed selection

Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the spin speed indicator.

To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases gradually. Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display. See "Auxiliary function selection" section for explanations of these options.

C If the programme has not reached the spinning step, you can change the speed without switching the machine to Pause mode.

10 EN

Programme and consumption table

EN

 

 

 

 

 

 

 

Auxiliary functions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Programme

 

<![if ! IE]>

<![endif]>(kg)LoadMax.

<![if ! IE]>

<![endif]>DurationProgramme(~min)

<![if ! IE]>

<![endif]>ConsumptionWater(l)

<![if ! IE]>

<![endif]>ConsumptionEnergy(kWh)

<![if ! IE]>

<![endif]>Speed***Max.

<![if ! IE]>

<![endif]>Prewash

<![if ! IE]>

<![endif]>WashQuick

<![if ! IE]>

<![endif]>PlusRinse

<![if ! IE]>

<![endif]>Creasing-Anti

<![if ! IE]>

<![endif]>HoldRinse

<![if ! IE]>

<![endif]>removalhairPet

Selectable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

temperature range °C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cottons

90

6

150

65

2.00

1600

Cold-90

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cottons

60

6

122

65

1.35

1600

Cold-90

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cottons

40

6

102

65

0.70

1600

Cold-90

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cotton Economic

60**

6

160

44

1.01

1600

 

 

 

 

 

40-60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cotton Economic

60**

3

130

37

0.82

1600

 

 

 

 

 

40-60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cotton Economic

40**

3

130

37

0.64

1600

 

 

 

 

 

40-60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Daily express

90

6

88

47

1.70

1400

 

 

 

 

Cold-90

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Daily express

60

6

58

60

1.00

1400

 

 

 

 

Cold-90

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Daily express

30

6

28

55

0.20

1400

 

 

 

 

Cold-90

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Darkwash

40

2.5

107

58

0.45

800

 

 

*

 

 

Cold-40

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mixed 40 (Mix 40)

40

3

115

45

0.50

800

Cold-40

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hand wash

30

1

43

30

0.15

600

 

 

 

 

 

 

Cold-30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Woollens

40

1.5

60

40

0.30

600

 

 

 

 

Cold-40

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BabyProtect

90

6

165

82

2.00

1600

 

*

 

 

30-90

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Synthetics

60

2.5

116

45

0.90

800

Cold-60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Synthetics

40

2.5

106

45

0.42

800

Cold-60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

** “Cotton eco 40°C and Cotton eco 60°C are the standard programmes.” These programmes are referred to as ‘standard 40°C cotton programme’ and ‘standard 60°C cotton programme’

Selectable

*

Automatically selected, no canceling.

**

Energy Label programme (EN 60456 Ed.3)

***

If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed.

C

Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature,

 

ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric

C

voltage.

You can see the washing time of the programme you have selected on the display of the machine. It is normal that small

C

differences may occur between the time shown on the display and the real washing time.

The auxiliary functions in the table may vary according to the model of your machine.

11 EN

Loading...
+ 25 hidden pages