Beko DCU 8430 X User manual [EN,EL]

Dryer

Στεγνωτήριο

Szárító

DCU 8430 X

Read this manual prior to initial operation of the product!

Dear Customer, We hope that your product, which has been manufactured in modern facilities and passed through a strict quality control procedure, will give you very good results. We advise you to read through this manual carefully before using your product and keep it for future reference.

This User Manual will

• Help you use your machine in a fast and safe way.

• Read the User Manual before installing and starting your product.

• In particular, follow the instructions related to safety.

• Keep this User Manual within easy reach for future reference.

• Please read all additional documents supplied with your product. Remember that this User Manual is also applicable for several other models.

Explanation of symbols

Throughout this User Manual the following symbols are used:

A Important safety information. Warning for hazardous situations with regard to life and

property.

B Caution; Warning for supply voltage.

Caution; Warning for fire hazard.

Caution; Warning for hot surfaces.

Read the instructions.

C Useful information. Important information or useful hints about usage.

This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose. Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under

the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment.

2960310747_EN/230113.1401

Important safety information

This section includes safety information that will help protection from risks of personal injuries or materialistic damages. Failure to follow these instructions shall cause any warranty and reliability commitment to become void.

General safety

• Never place the machine on a carpet-

covered floor, otherwise, lack of airflow beneath the machine may cause electrical parts to overheat. This will cause problems with your machine.

• If the power cable or mains plug is

damaged, you must call Authorised Service Agent for repair.

• The product should not be plugged in

during installation, maintenance and repair works. Such works should always be made

by the technical service. Manufacturer shall

not be held responsible for damages arising from processes carried out by unauthorised persons.

• Connect the product to a grounded outlet

protected by a fuse of suitable capacity as stated in the technical specifications table.

• Operate your product at temperatures

between +5°C and +35°C.

• Do not use electrical devices in the product.

• Do not connect the air exit of the product

to the chimney holes which are used for the

exhaust fumes of the devices operating with

gas or other types of fuel.

• You must provide enough ventilation in order to prevent gases exiting from devices

operating with other types of fuels including the naked flame from accumulating in the room due to the back fire effect.

• Always clean the lint filter before or after

each loading.

• Never operate your dryer without the lint

filter installed.

• Do not allow fibre, dust and dirt accumulation around the exhaust exit and

at adjacent areas.

• Power cable plug must be within easy reach

after installation.

• Do not use extension cords, multi-plugs

or adaptors to connect the dryer to power

supply in order to decrease the risk of electric shock.

• Do not make any changes on the plug supplied with the product. If it is not

compatible with the socket, have a qualified electrician change the socket with a suitable one.

• Items cleaned or washed with gasoil/fuel oil, dry-laundry solvents and other combustible or explosive materials as well as the items

that are contaminated or spotted with such materials should not be dried in the product

since they emit flammable or explosive

vapor.

• Do not dry items cleaned with industrial

chemicals in the dryer.

• Do not dry unwashed items in the dryer.

• Items soiled with cooking oils, acetone,

alcohol, fuel oil, kerosene, stain remover, turpentine, paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer.

• Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber

reinforcement and rubber foam pads should not be dried in the dryer.

• Do not use fabric softeners and anti-static

products unless they are recommended by the manufacturers of the fabric softener or the product.

• This product must be grounded. Grounding

installation decreases the risk of electric shock by opening a path with low resistance for the electricity flow in case of

a malfunction or failure. Power cable of this

product is equipped with a conductor and a grounding plug that allows for grounding the product. This plug must be installed appropriately and inserted into a socket which is grounded in accordance with the local laws and regulations.

• Do not install the product behind a door

with a lock, sliding door or a door that has a hinge against the hinge of the dryer.

• Do not install or leave this product in places where it will be exposed to outdoor

conditions.

• Do not tamper with the controls.

• Do not perform any repair or part replacing

procedures on the product even if you know or have the ability to perform unless it is clearly suggested in the operating instructions or the published service manual.

• Inside and exhaust duct of the product

must be cleaned by the qualified service personnel periodically.

• Wrong connection of grounding conductor of the product can cause electric shock. If

you have any suspect about the grounding connection, have it checked by a qualified electrician, service representative or service personnel.

• Do not reach into the machine when the

drum is spinning.

• Unplug the machine when it is not in use.

• Never wash down the appliance with water! There is the risk of electric shock! Always

disconnect by unplugging from the mains before cleaning.

• Never touch the plug with wet hands. Never

unplug by pulling on the cable, always pull out by grabbing the plug only. Do not operate the machine if the power cable or

plug is damaged!

• Never attempt to repair the machine

yourself, otherwise, you will be putting your life and others’ lives in danger.

• For malfunctions that cannot be solved by

following the information given in the safety

instructions:

Turn off the machine, turn off and contact

an authorised service agent.

• Do not stop the dryer before the drying

cycle comes to an end unless you will remove all laundry from the dryer fast in order to lay them and dissipate the heat.

• Remove the door of the drying

compartment before decommissioning or disposing of the product.

• The final step of the drying cycle (cooldown cycle) occurs without applying

heat to ensure that the items are left at a temperature that will not damage them.

• Fabric softeners or similar products should

be used as specified by the fabric softener instructions.

• Underwear that contains metal

reinforcements should not be placed in a dryer. Damage to the dryer can result if metal reinforcements come loose during drying.

• Check all garments for forgotten lighters,

coins, metal pieces, needles, etc. before loading.

C At times when your machine is not in use

or after the laundry is taken out following the completion of drying process, keep the door of your machine closed.

B Your machine is always energized as long

as it is plugged in.

Intended use

• This product has been designed for domestic use. It should not be used for

other purposes.

• Use the product only for drying laundry that

are marked accordingly.

• Dry only those articles in your product that

are stated in this manual.

• This product is not intended to be used by

persons with physical, sensory or mental

disorders or unlearned or inexperienced people (including children) unless they

are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product.

Children’s safety

• Electrical appliances are dangerous for the children. Keep children away from the

machine when it is operating. Do not let them tamper with the machine.

• Packaging materials are dangerous to children. Keep the packaging materials out

of reach of children or dispose them by classifying according to waste directives.

• Do not allow children sit/climb on or enter in

the product.

• Children should be supervised to ensure

that they do not play with the product.

• Close the loading door when you leave the

area where the product is located.

2 Installation

Refer to the nearest Authorised Service Agent

for installation of your product.

C Preparation of location and electrical

installation for the product is under customer’s responsibility.

BInstallation and electrical connections must

be carried out by a qualified personnel.

A Prior to installation, visually check if the

product has any defects on it. If so, do not

have it installed. Damaged products will cause risks for your safety.

Appropriate installation location

• Install the product in an environment which has no risk of freezing and is in a stable and

level position.

• Operate your product in a well ventilated, dust-free environment.

• Do not block the air ducts in front of and

under the product with materials such as long pile rugs and wooden bands.

• Do not place your product on a long pile rug

or on similar surfaces.

• Do not install the product behind a door

with a lock, sliding door or a hinged door which can strike the product.

• Once the product is installed, it should stay

at the same place where its connections have been made. When installing the product, make sure that the rear wall of it

does not touch anywhere (tap, socket, etc.)

and also pay attention to install the product at a place where it will stay permanently.

BDo not place the product on top of the

power cable.

• Keep at least 1.5 cm distance to walls of

other furniture.

Removing the transportation safety assembly

ARemove the transportation safety assembly

before using the product for the first time.

1. Open the loading door.

2. There is a nylon bag inside the drum that

contains a piece of styrofoam. Hold it from

its section marked with XX.

3. Pull the nylon towards yourself and remove

the transportation safety assembly.

A Make sure that you have removed

the transportation safety assembly

(nylon+styrofoam pieces) before using the

product for the first time. Do not leave any items inside the drum.

Under counter installation

• A special part (Part no. 297 360 0100)

replacing the top trim must be provided and installed by the Authorised Service Agent in order to use the machine under a counter or

in a cupboard. It should never be operated

without the top trim.

• Leave at least 3 cm of space between

the side and rear walls of the product and the walls of the counter/cupboard when installing your product under a counter or in a cupboard.

Mounting over a washing machine

• A fitting device should be used between

the two machines when installing above a

washing machine. The bracket (Part no. 297 720 0100 white/297 720 0400 grey) must be

installed by the Authorised Service Agent.

• Place the product on a firm floor. If it will be

placed on top of a washing machine, the

approximate weight of both machines may

reach 180 kg when they are full. Therefore, the floor must be capable of carrying the load

on it!

Connection to water drain;

In products equipped with a condenser unit the

water accumulated during the drying cycle is

collected in the water tank. You should drain the

accumulated water after each drying cycle.

You can directly send the accumulated water

out through the water drain hose supplied with the machine instead of periodically draining the

water collected in the water tank. Connecting the water drain hose;

1. Remove the hose on the machine by pulling

it out from its end. Do not use any tools to take out the hose.

2. Connect the special drain hose supplied with the machine to the pipe fitting.

3. The other end of the drain hose can be directly connected to the wastewater drain or to the washbasin. The fitting must always

be secured in all types of connections. Your

house may be flooded if the hose gets out of its housing during water discharge.

Important:

• The hose should be attached to a height of maximum 80 cm.

• You must be careful not the pinch or bend

the hose.

• The end of the hose should not be bent, it

should not be stepped on and it must not be folded between the drain and the machine.

Adjusting the feet

In order to ensure that your machine operates more silently and vibration-free, it must stand

level and balanced on its feet. Balance the machine by adjusting the feet.

Rotate the feet to adjust until the machine

stands level and firmly.

CNever unscrew the adjustable feet from their

housings.

Electrical connection

Connect the machine to a grounded outlet protected by a fuse of suitable capacity as

stated in the technical specifications table. Our

company shall not be liable for any damages that will arise when the machine is used on a circuit without grounding.

• Connection must comply with national

regulations.

• If the current value of the fuse or breaker

in the house is less than 16 Amps, have a qualified electrician install a 16 Amp fuse.

• Power cable plug must be within easy

reach after installation.

• The voltage and allowed fuse or breaker

protection are specified in the “Technical Specifications” section.

• The specified voltage must be equal to your

mains voltage.

• Do not make connections via extension cables or multi-plugs.

• The main fuse and switches must have a

contact distance of minimum 3 mm.

BDamaged power cable must only be

replaced by a qualified electrician.

BIf the product is faulty, it must not be

operated unless it is repaired! There is the risk of electric shock!

First use

• To have the product ready for operation

before calling the authorised service agent, make sure that its location and power

supply installations are appropriate. If they

are not, call a qualified electrician to have any necessary arrangements carried out.

• Make sure that the power connections of

the product are in accordance with the instructions given in relevant chapters of this manual.

Disposing of packaging material

Packaging materials are dangerous to children. Keep packaging materials in a safe place out of reach of children. Packaging materials of

your product are manufactured from recyclable materials. Sort and dispose of them in accordance with recycled waste instructions. Do not dispose of them with normal domestic waste.

Transportation of the machine

1. Unplug the machine from the mains.

2. Remove the water drain (if any) and

chimney connections.

3. Drain water remained in the machine completely before transportation.

Disposing of the old machine

Dispose of your old machine in an environmentally friendly manner.

Refer to your local dealer or solid waste

collection centre in your area to learn how to dispose of your machine. Before disposing of your old machine, cut off the power cable plug and make the loading door lock unusable to avoid dangerous conditions to children.

Technical specification

EN 2

Height (adjustable) 84,6 cm

Width 59,5 cm

Depth 59,8 cm

Capacity (max.) 8 kg

Weight (net) 38kg

Voltage

See type labelRated power input

Model code

Type label is located behind the loading door.

3 Initial preparations for drying

Things to be done for energy saving:

• Make sure that you operate the product

at its full capacity but pay attention to not

exceeding it.

• Spin your laundry at the highest speed

possible when washing them. Thus, the drying time is shortened and energy consumption is decreased.

• Pay attention to dry same types of laundry

together.

• Follow the instructions in the user manual

for programme selection.

• Make sure that sufficient clearance is

provided at the front and rear side of the dryer for air circulation. Do not block the grill at the front side of the product.

• Do not open the door of the machine during drying unless necessary. If you must

certainly open the door, pay attention not to keep it open for a long time.

• Do not add new (wet) laundry during drying.

• Lint and fibres released from the laundry to

the air during the drying cycle are collected

in the “Lint Filter”. Make sure that you clean

the filters before or after each drying.

• In models with condenser, make sure that

you clean the condenser regularly at least once every month or after every 30 drying cycles.

• In vented models, follow the chimney

connection rules in the user manual and pay attention to the chimney cleaning.

• Ventilate the room, where the dryer is

located, well during drying.

Laundry suitable for drying in the machine

C Always follow the suggestions on the

laundry labels. Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme.

A B C

Low

l mn

o p q

Laundry unsuitable for drying in the machine

• Laundry items with metal attachments such

as belt buckles and metal buttons can damage your dryer.

• Do not dry items such as woollens, silk

garments and nylon stockings, delicate embroidered fabrics, laundry with metal accessories and items such as sleeping bags in the dryer.

• Laundry made of delicate and valuable

fabrics as well as lace curtains can be

creased. Do not dry them in the dryer!

• Do not dry items made of hermetic fibres

such as pillows and quilts in the dryer.

• Laundry made of foam or rubber will be

deformed.

• Do not dry laundry containing rubber in the

dryer.

• Do not dry laundry exposed to petroleum, oil, combustible or explosive agents in the

dryer even if they are washed beforehand.

• Overly wet laundry or laundry with dripping

water must not be put into the dryer.

• Items cleaned or washed with gasoil/fuel oil, dry-laundry solvents and other combustible or explosive materials as well as the items

that are contaminated or spotted with such materials should not be dried in the product

since they emit flammable or explosive

vapor.

• Do not dry items cleaned with industrial

chemicals in the dryer.

• Do not dry your unwashed laundry in the

dryer.

• Items soiled with cooking oils, acetone,

alcohol, fuel oil, kerosene, stain remover, turpentine, paraffin and paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer.

• Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber

reinforcement and rubber foam pads should not be dried in the dryer.

• Do not use fabric softeners and anti-static

products unless they are recommended by the manufacturers of the fabric softener or the product.

• Do not dry the underwear reinforced with metal parts in the dryer. If these metal

reinforcements loosen and break during drying, they will damage your dryer.

Preparing laundry for drying

• Check all laundry items before loading them

into the product to make sure that there are no lighters, coins, metal items, needles and etc. in their pockets or on any part of them.

• Fabric softeners and similar products must be

used in accordance with the instructions of the manufacturer of the relevant products.

• All laundry must be spun at the highest spin

speed that your washing machine allows for the laundry type.

• Laundry may be tangled after washing.

Separate your laundry before placing them into your dryer.

• Sort your laundry according to their types and

thicknesses. Dry the same type of laundry

together. E.g.: fine kitchen towels and table

cloths dry faster than the thick bath towels.

Correct load capacity

A Consider the information in the "Programme

Selection Table". Always start the programme in accordance with the

maximum load capacity.

C Adding laundry to the machine more

than the level shown in the figure is not recommended. Drying performance will degrade when the machine is overloaded. Furthermore, your dryer and your laundry can be damaged.

C Place your laundry into the drum loosely so

that they will not get tangled.

CLarge pieces (E.g.: bed sheets, quilt covers,

large tablecloths) may bunch-up. Stop the dryer 1-2 times during drying process to separate bunched-up laundry.

Following weights are given as examples.

Home articles

Cotton quit covers (double) 1500 Cotton quit covers (single) 1000 Bed sheets (double) 500 Bed sheets (single) 350 Large tablecloths 700

Small tablecloths 250 Tea napkins 100 Bath towels 700

Hand towels 350

Garments

Blouses 150 Cotton shirts 300 Shirts 200 Cotton dresses 500 Dresses 350 Jeans 700

Handkerchiefs (10 pieces) 100 T-Shirts 125

Approximate weights (g)

Loading the laundry

• Open the loading door.

• Place laundry items loosely into the dryer.

• Push the loading door to close. Ensure that

no items are caught in the door.

4 Selecting a Programme and Operating Your Machine

Control panel

1. On/Off button

2. Programme selection button

3. Display

4. End time setting button

5. Start/Pause/Cancel button

Start and pause symbol

Water tank full warning symbol

Filter cleaning warning symbol

Symbol for specifying the end time

(Time Delay)

On/Off

Programme

Child-proof

lock

Ending In

Start

pause

Cottons

Synthetics

Ventilation

Jeans

Shirt

Express

15’

Iron dry

Preparing the machine

1. Plug in your machine.

2. Place the laundry in the machine.

3. Press the On/Off button for 1 second.

CPressing the “On/Off” button does not

necessarily mean the programme has

started. Press “Start/Pause/Cancel” button

to allow the machine start the programme.

Programme selection

Decide the appropriate programme from the table below which includes drying levels. Select the desired programme with the

Programme Selection button.

Drying at high temperature only for cotton laundry. Thick and multi layered laundry

Extra dry

Cupboard dry

(E.g.: towels, linens, jeans) are dried in a way

that they do not require ironing before placing in the wardrobe.

Normal laundry (E.g.: tablecloths, underwear)

are dried in a way that they do not require ironing before placing in the wardrobe.

Extra

dry

Cupboard

dry

Cupboard

dry plus

Delicates

Normal laundry (E.g.: tablecloths, underwear)

are dried in a way that they do not require

Cupboard

dry Plus

ironing before placing in

the wardrobe. However,

they are dried more when compared to the Wardrobe Dry option.

Normal laundry (E.g.,

Shirts, dresses) are dried

Iron dry

ready to be ironed.

C For further programme details, see,

“Programme Selection Table”

•Main programmes

Depending on the type of laundry, the following

main programmes are available:

• Cottons

You can dry your durable laundry with this programme. Dries at high temperature. It is

recommended to use for your cotton items (such as bed sheets, quilt cover, underclothing,

etc.).

• Synthetics

You can dry your less durable laundry with this programme. It dries at a lower temperature compared to the cottons programme. It is

recommended for your synthetic laundry (such as shirts, blouses, synthetic/cotton blended

laundry, etc.).

C Do not dry curtains and lace in your

machine.

•Anti-creasing

A 2-hour anti creasing programme to prevent

laundry from creasing will be activated if

you do not take the laundry out after the programme is over. This programme rotates

the laundry in 10-minute intervals to prevent

creasing.

•Special programmes

For special cases, there are also extra programmes available:

C Additional programmes may differ according

to the model of your machine.

•Express 15’

Use this function to make 2 shirts ready for iron

in 15 minutes.

C To obtain better results from your dryer,

your laundry must be washed at suitable programmes and spun at the recommended spin speeds in the washing machine.

• Shirts

This programme dries the shirts more sensitively and creases them less and thus, helps to iron them more easily.

C There may be a little humidity on your

shirts at the end of the programme. We recommend you not to leave the shirts in the dryer.

• Jeans

You can use this programme to dry your jeans

that you have spun at high speeds in your washing machine.

C Review the relevant section in the

programme table.

• Delicates

You can dry at a lower temperature your very

delicate laundry (silk blouses, fine underwear,

etc.) that are suitable for drying or laundry which is advised to be hand-washed.

CTo obtain better results from your dryer,

your laundry must be washed at suitable programmes and spun at the recommended spin speeds in the washing machine.

•Refresh

Only ventilation is performed for 10 minutes without blowing hot air. You can air your clothes

that have been kept at closed environments for a long time and deodourise unpleasant odours thanks to this programme.

•Timer programmes

You can select one of the 10 min., 20 min.,

40 min. and 60 min. timer programmes to achieve the desired final drying level at low

temperatures. Programme dries at the selected

time regardless of the drying temperature.

Programme selection and consumption table

EN 2

Programs Capacity (kg)

Cottons / Coloreds

Spin speed in washing

machine (rpm)

Approximate

amount of

remaining

humidity

Drying time

(minutes)

Cupboard dry

Cupboard dry plus

Iron dry

Xpress 15'

Shirt

Jeans

Delicates

Synthetics

Cupboard dry

Energy consumption values

Programs Capacity (kg)

Cottons cupboard dry*

Cottons iron dry

Synthetics cupboard dry

8 1000 % 60 130

8 1000 % 60 134

8 1000 % 60 105

0.5 1200 % 50 15

1.5 1200 % 50 40

4 1200 % 50 80

1.75 600 % 40 40

4 800 % 40 53

8 1000 % 60 4.73

8 1000 % 60 3.80

4 800 % 40 1.80

Spin speed in washing

machine (rpm)

Approximate

amount of

remaining

humidity

Energy

consumption

value kWh

* : Energy Label standard programme (EN 61121:2012) All values given in the table have been fixed according to EN 61121:2012 Standard. These values

may deviate from the table according to the laundry type, laundry spin speed, environmental conditions and voltage fluctuations.

Auxiliary function Cancel audio warning

Your dryer will give an audio warning when

the programme comes to an end or each time

you press the buttons. If you want to disable the audio warning, press the Programme "-"

and End Time "+" buttons simultaneously for 3

seconds. "off-bzr-off" appears on the display. Machine does not give an audio warning at

the end of the programme or when a button

is pressed. You can enable the audio warning

by pressing the same buttons simultaneously

again for 3 seconds. If you do so, "on-bzr-on"

appears on the display and audio warning is enabled.

C You can select this function either before or

after the programme starts.

Warning indicators

C Warning indicators may differ according to

the model of your machine.

Lint filter cleaning

A warning light will turn on to remind filter cleaning after the programme finishes.

C If the filter cleaning warning lights up

continuously, please refer to, “Suggested solutions for problems”.

Water tank

A warning symbol will turn on at the end of the programme or when the tank is full with water. The machine stops operating when this warning symbol lights up while a programme

is running. To restart the machine, please

drain the water in the water tank. Press "Start/ Pause" button to start the program after you

have emptied the water tank. The warning symbol turns off and the programme resumes operating.

Specifying the end time ( Ending In)

With the “Time delay” function you can delay the ending time of the programme up to 24 hours.

1. Open the loading door and put the laundry

in.

2. Once the programme is selected, set the end time with end time ‘‘+’’ , ‘‘-’’ buttons.

End time symbol flashes.

Press "Start/Pause" button to start the time

delay function. Delay time appears on the

display and End Time symbol and Start/Pause

symbol illuminates. The time on the display is the total of normal drying time and delay time.

Changing the delay time

If you want to change the time during the countdown:

1. Press Start/Pause button. End Time symbol illuminates and Start/Pause symbol flashes.

2. Press End Time ‘‘+’’ , ‘‘-’’ buttons to set the

new end time. End Time symbol and Start/

Pause symbol flash while making the new

settings.

3. Press Start/Pause button to complete

setting the new end time. End Time symbol

and Start/Pause symbol flash.

C When setting the end time again, End Time

symbol turns off and Start/Pause symbol

flashes once the actual programme duration

appears on the display. Programme starts

immediately without any delay if you press

Start/Pause button.

Canceling the time delay

If you want to cancel the time delay countdown and start the programme immediately:

1. Press “Start/Pause” button for 3 seconds to

cancel the programme.

2.Then, press "Start/Pause" button to select

the desired programme.

Changing the programme after it has started

You can use this feature to dry your clothes

under higher or lower temperatures after your dryer has started.

For example;

1. Press and hold the “Start/Pause/Cancel”

button for about 3 seconds to “Cancel”

the programme in order to select “Extra Dry” programme instead of “Iron Dry”

programme.

2. Select the programme with the Programme

Selection button.

3. Press "Start/Pause/Cancel" button to start

the programme.

C Child-proof lock of the machine should not

be active in order to perform this operation.

If the child-proof lock is active, deactivate it

before performing these operations.

Adding/removing laundry in standby mode

In order to add or remove laundry after the programme starts:

1. Press the “Start/Pause/Cancel” button to switch the dryer to “Pause” mode. Drying

process will stop.

2. Open the door at “Pause” position and

close it again after adding or taking out laundry.

3. Press "Start/Pause/Cancel" button to start

the programme.

C Any laundry added after the drying process

has started may cause the dried clothes in the machine intermingle with wet clothes and the result will be wet laundry after the drying process is over.

CLaundry may be added or taken out as

much as desired during a drying process, but as this process will interrupt drying

continuously, it will extend the programme

duration and increase energy consumption. Therefore, it is recommended to add laundry before the drying programme has started.

Child-proof lock

There is a child-proof lock to prevent any

programme interruption due to the pressing of button while the programme is running. The

loading door and all buttons except the "On/ Off" button on the control panel are deactivated when the child-proof lock is active. In order to activate the childproof lock, press End Time "-" and Programme "+" buttons simultaneously for 3 seconds. "CL3-CL2-CL1" and "on-CL-on" appears on the display and the

function is activated. To start a new programme after the programme

is over or to interrupt the programme, the childproof lock should be deactivated. Press the

same buttons for 3 sec. again to deactivate the

child-proof lock. "CL3-CL2-CL1" and "oFF-CL-

oFF" appears on the display and the function is deactivated.

C Child-proof lock is deactivated when the

machine is restarted by pressing the On/Off

button.

C Press the relevant buttons for 3 seconds to

activate the child-proof lock. A long beep will be heard and the child-proof lock will be

activated. A double beep will be heard if you

press any button when the child-proof lock is active. Press the buttons for 3 seconds to deactivate the child-proof lock. Single beep will be heard and child-proof lock will be

deactivated.

Ending the programme through canceling

In order to cancel the selected program; press "Start/Pause/Cancel" button for about 3

seconds.

AAs the inside of the machine will be

excessively hot when you cancel the

programme while the machine is running, activate the ventilation programme to cool it down.

End of programme

"End" appears on the display and “Filter cleaning” and "Water tank" warning lights turn on when the programme is over. The door can be opened and the machine becomes ready for

a second cycle.

Press “On/Off” button to turn off the dryer.

C Final step of the drying cycle (cooling step)

is performed without heat application in order to keep the items at a temperature that would not harm them.

C A 2-hour anti creasing programme to

prevent laundry from creasing will be activated if you do not take the laundry out after the programme has come to an end.

C If you will not take the laundry out

immediately, do not stop the dryer before the drying process is complete.

C Clean the filter after each drying (please see,

Lint filter cleaning)

C Drain the water tank after each drying

(please see, Water tank)

5 Maintenance and cleaning

Filter Cartridge / Door Inner Surface

Lint and fibres released from the laundry to the

air during the drying cycle are collected in the “Filter Cartridge”.

C Such fibre and lint are generally formed

during wearing and washing.

C Always clean the filter and the inner surfaces

of the cover after each drying process.

C You can clean the filter and filter area by

vacuum cleaner.

To clean the filter:

1. Open the loading door.

2. Remove the cover filter by pulling it up and

open the filter.

3. Clean lint, fibre, and cotton raveling by hand or with a soft piece of cloth.

4. Close the filter and place it back into its

seat.

C Clogging may arise on the filter surface

after using your machine for some time; if this occurs, wash the filter with water and dry it before using again.

Sensor

There are humidity sensors in your dryer that detect whether the laundry is dry or not.

To clean the sensor:

1. Open the loading door of the dryer.

2. Allow the machine to cool down if drying has been carried out.

3. Wipe the metal sensors with a soft cloth, dampened with vinegar and dry them.

C Clean metal sensors 4 times a year. A Never use solvents, cleaning agents

or similar substances when cleaning since these materials can cause fire and

explosion!

C Clean the entire inner surface of the cover

and door gasket.

+ 42 hidden pages