Beko CFP3691DVG, CFP3691DVW Instruction manual

Refrigerator

User manual

CFP1691DX - CFP1691DS - CFP1691DB - CFP1691DW CFE1691DB - CFP1691DG - CFP1691DA - CFP3691DVW CFP3691DVS - CFP3691DVB - CFP3691DVG

EN /

57 6210 0000/AV

Please read these instructions first before using your appliance

Thank you for choosing a Beko appliance.

Please take some time to read this user manual before using your appliance, to

ensure you know how to safely operate the controls and functions.

Carefully follow all unpacking and installation instructions to ensure the

appliance is correctly connected and fitted prior to use.

Please write your product model and serial number on the last page of this user manual, and store in a safe location close to the appliance for easy future reference.

This user manual may also be applicable for several other models. Differences between models will be listed.

If you have any questions or concerns, please call our contact centre or find help and information online at www.beko.co.uk

Symbols and their descriptions

This instruction manual contains the following symbols:

C Important information or useful usage tips. A War ning ag ain st d ang erou s co ndit ion s for li fe an d p rope rty. B War ning ag ain st e lec tric vo ltag e.

INFORMATION

SUPPLIER’S NAME

MODEL IDENTIFIER

The model information as stored in the product data base can be reached by entering following website and searching for your model identiﬁer (*) found on energy label.

(*)

https://eprel.ec.europa.eu/

1 Your refrigerator 3

2 Warnings 4

Electrical requirements ........................... 5

Warning! This appliance must be

earthed ..........................................................5

Energy saving tips .....................................6

Compliance with WEEE Directive and

Disposing of the Waste Product: ....... 7

Compliance with rohs directive: .........7

Package information ................................ 7

3 Installation 8

Points to be considered when re-

transporting your refrigerator .............8

Before operating your refrigerator ....8

Electric connection ................................... 8

Disposing of the packaging ...................9

Disposing of your old refrigerator ...... 9

Placing and Installation...........................9

Transportation Instructions ................10

Installation Instructions .......................11

Changing the illumination lamp .......11

4 Before operating 13

Final Check .................................................13

5 Using your refrigerator 14

Temperature Control And

Adjustment ................................................14

Thermostat setting button .................14

Storing Frozen Food ...............................15

Freezing Fresh Food ...............................15

Making Ice Cubes .....................................15

Defrosting ..................................................15

Chiller Compartment .............................. 17

Using the water dispenser .................. 17

Filling the water dispenser's tank ....17

Cleaning the water tank .....................18

Drip tray ......................................................19

6 Maintenance and cleaning 20

7 Do's and Don'ts 21

Problem Solvıng ...................................... 22

1 Your refrigerator

Congratulations on your choice of a Beko designed to give you service for many years.

*11

quality Appliance which has been

1. Adjustable door shelves

2. Water dispenser filling tank

3. Egg section

4. Water dispenser reservoir

5. Adjustable Front Feet

7. Vegetable compartment

8. Chiller compartment

9. Adjustable shelves

10. Wine rack

11. Thermostat Control

6. Freezing and Storage (store

fresh food to be frozen lower down)

C Figures that take place in this instruction manual are schematic and

may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.

2 Warnings

 Do not connect your

appliance to the electricity supply until all packing and transit protectors have been removed.

 If transported horizontally

leave to stand upright for at least 4 hours before switching on to allow compressor oil to settle

 If you are discarding an old

refrigerator with a lock or latch fitted to the door, disable the lock/latch, ensure that it is left in a safe condition to prevent the entrapment of young children.

 This fridge/freezer must

only be used for its intended purpose i.e the storing and freezing of edible foodstuff.

 Do not dispose of the

appliance on a fire. At Beko, the care and protection of our environment is an ongoing commitment. This appliance which is among the latest range introduced is particularly environment friendly. Your appliance contains non CFC / HFC natural substances in the cooling system (Called R600a) and in the insulation (Called cyclopentane) which are potentially flammable if exposed to fire. Therefore, take care not to damage, the cooling circuit / pipes of the

appliance in transportation and in use. In case of damage do not expose the appliance to fire or potential ignition source and immediately ventilate the room where the appliance is situated.

 We suggest you contact your

local authority for disposal information and facilities available.

 To obtain the best possible

performance and trouble free operation from your appliance it is very important to carefully read these instructions.

 On delivery, check to make

sure that the product is not damaged and that all the parts and accessories are in perfect condition.

 Ensure that the plug remains

readily accessible. Do not use multiple adapter or extension cable.

 Failure to observe these

instructions may invalidate your right to free service during the guarantee period.

 Keep ventilation openings, in

the appliance enclosure or in the built-in structure, clear of obstruction.

 Do not damage the refrigerant

circuit.

 Do not use electrical

appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

 We su gge st you keep these

instructions in a safe place for easy reference.

 This appliance can be used

by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

 Children should be supervised

to ensure that they do not play with the appliance.

Electrical requirements

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown on the rating plate inside the appliance corresponds to your electricity supply.

Rating label is on the left hand side of fridge inner liner.

We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket. The appliance must be positioned so that the plug is accessible.

WARNING:

When positioning the appliance ensure the supply cord is not trapped or damaged.

Should the mains lead of the appliance become damaged or should it need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Beko authorised service agent.

Warning! This appliance must be earthed

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.

The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTABEAB approved BS 1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted.

Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

Important! Fitting A Different Plug

1. As the colours of the wires

in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: (See diagram).

2. Connect the green-yellow

or green (Earth) wire to the terminal in the plug marked ‘E’ or with the symbol or coloured green and yellow or green.

3. Connect the blue (Neutral)

wire to the terminal in the plug marked ‘N’ or coloured black.

4. Connect the brown (Live) wire

to the terminal in the plug marked ‘L’ or coloured red.

5. With alternative plugs a 13

A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

6mm.

32mm.

BROWN

RED

22mm.

6mm.

CORD GRIP

12mm.

6mm.

FUSE

FITTED WITH

CARTRIDGE FUSE

FIT BS 1362 REPLACEMENT

BS 1362 13A FUSE ALWAYS

GREEN & YELLOW

GREEN

BLUE

BLACK

Energy saving tips

1. Ensure your appliance is

installed in a well ventilated area.

2. Ensure the time between

buying chilled/frozen food and placing them in your appliance is kept at minimum, particularly in summer. We recommend you use a cool bag or a special carrier bag to carry perishable food.

3. Do not leave the door (s) of

your appliance open longer than necessary and ensure they are closed properly after each opening.

4. Defrost frozen food in the

fridge compartment, so that frozen food acts as an ice pack to assist cooling in the fridge.

5. Energy consumption of this

appliance is measured while freezer compartment is loaded without use of top shelf lid and the drawers except the bottom drawer. It is advised that freezer compartment is loaded without use of drawers except the bottom drawer in order to achieve maximum loading capacity.

Compliance with WEEE Directive and Disposing of the Waste Product:

This product complies with EU WEEE Directive (2012/19/ EU). This product bears a classification

symbol for waste electrical and electronic equipment (WEEE).This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.

Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Compliance with rohs directive:

The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

3 Installation

BPlease remember that the

manufacturer shall not be held liable if the information given in the instruction manual is not observed.

Points to be considered

when re-transporting your

refrigerator

1. Your refrigerator must be emptied and cleaned prior to any transportation.

2. Shelves, accessories, crisper and etc. in your refrigerator must be fastened securely by adhesive tape against any jolt before repackaging.

3. Packaging must be must be adequate and the rules of transportation printed on the package must be followed.

Please do not forget…

Every recycled material is an

indispensable source for the nature and for our national resources.

If you wish to contribute to recycling

the packaging materials, you can get further information from the environmental bodies or local authorities.

Before operating your refrigerator

Before starting to use your refrigerator

check the following:

1. Is the interior of the refrigerator dry and can the air circulate freely in the rear of it?

2. Please install the 2 plastic wedges as illustrated in the figure. Plastic wedges will provide the required distance between your

refrigerator and the wall in order to allow the air circulation. (The illustrated figure is only an example and does not match exactly with your product.)

3. Clean the interior of the refrigerator as recommended in the “Maintenance and cleaning” section.

4. Plug the refrigerator into the wall outlet. When the fridge door is open, the fridge compartment interior light will come on.

5. You will hear a noise as the compressor starts up. The liquid and gases sealed within the refrigeration system may also give rise to noise, even if the compressor is not running and this is quite normal.

6. Front edges of the refrigerator may feel warm. This is normal. These areas are designed to be warm to avoid condensation

Electric connection

Connect your product to a grounded socket which is being protected by a fuse with the appropriate capacity.

Important:  The connection must be in

compliance with national regu lations.

 The power cable plug must be easily

accessible after installation.

 The specified voltage must be equal

to your mains voltage.

 Extension cables and multiway

plugs must not be used for connection.

+ 20 hidden pages