Beko BWD7541IG User Manual

Download

Page 1

Washer-Dryer

User’s Manual

Document Number=

BWD7541IG

2820526496_EN/ 19-04-18.(10:39)

Page 2

Please read this user manual first!

Dear Customer, Thank you for choosing a Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. If you handover the product to someone else, give the user manual as well. Follow all warnings and information in the user manual.Throughout this user manual the following symbols are used:

DANGER!

• Warning for electric shock.

DANGER!

• Product weight warning

DANGER!

• Fire risk warning.

CAUTION!

• Warning for hazardous situations with regard to life and property.

PRECAUTION!

• Precautions that need to be taken.

• Read user manual.

• Packaging materials of the product are manufactured from recyclable materials in accordance with regulations.

• Do not dispose of the Packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

• Allergy UK, is the brand of British Allergy Association. Their main endorsement is the ‚Seal of Approval‘. When you see a product with this logo on it, you have the reassurance the product has been scientifically tested to prove it is efficient at reducing/removing allergens from the environment of allergy and asthma sufferers or the products have significantly reduced allergen/chemical content.

“The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of machine washable wool products provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine. M1527 “ “In UK, Eire, Hong Kong and India the Woolmark trade mark is a Certification trade mark.”

INFORMATION

• Important information or useful hints about usage.

This product was manufactured using the latest technology in environmentally friendly conditions.

Page 3

1 Important instructions for safety and environment

This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall invalidate any warranty.

1.1 General safety

CAUTION!

• This product can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out. Children should not play with the device. Cleaning and maintenance works should not be performed by children unless they are supervised by someone. Children under the age of 3 should be kept away unless continuously supervised.

PRECAUTION!

• Never place the product on a carpet-covered floor. Otherwise, lack of airflow beneath the machine will cause electrical parts to overheat. This will cause problems with your product.

• Adequate ventilation has to be provided to avoid the back flow of gases into the room from appliances burning other fuels, including open fires. Only for ducted appliances.

PRECAUTION!

• The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the tumble dryer in such a way that a full opening of the tumble dryer door is restricted.

INFORMATION

• Always have the installation procedures carried out by the competent persons. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons.

1.1.1 Electrical safety

DANGER!

• If the product has a failure, it should not be operated unless it is repaired by the Authorised Service Agent. There is the risk of electric shock!

• Never wash the product by spreading or pouring water onto it! There is the risk of electric shock!

CAUTION!

• If the power cable is damaged, it must be replaced by the manufacturer, after sales service or a similarly qualified person (preferably an electrician) or someone designated by the importer in order to avoid possible risks.

3 / EN

Washer-Dryer / User’s Manual

Page 4

WARNING!

• The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility.

CAUTION!

• The water supply and draining hoses must be securely fastened and remain undamaged. Otherwise, there is the risk of water leakage.

PRECAUTION!

• Unplug the product when it is not in use.

• Never touch the plug with wet hands! Never unplug by pulling on the cable, always unplug by holding the plug.

• Product should be unplugged during installation, maintenance, cleaning and repair procedures.

• Do not make connections via extension cables or multi-plugs.

INFORMATION

• This product is designed to resume operating in the event of powering on after a power interruption. If you wish to cancel the programme, see “Cancelling the programme” section.

1.1.2 Product safety

DANGER!

• Never open the loading door or remove the filter while there is still water in the drum. Otherwise, risk of flooding and injury from hot water will occur.

INFORMATION

• Do not force open the locked loading door. Door can be opened a few minutes after the washing cycle ends. If the machine has not cooled enough at the end of the programme, loading door cannot be opened. Do not force the loading door to open. It must be left to cool itself. The loading door and the lock mechanism may get damaged.

• In the installation location of this product, there must not be a lockable, sliding or hinged door that will restrict the full opening of the loading door.

• Follow the instructions on the textile tags and on the detergent package.

• Use only detergents, softeners and supplements suitable for washing machines.

• Do not install or leave this product in places where it might be exposed to outdoor conditions.

• Controls must not be tampered with.

4 / EN

Washer-Dryer / User’s Manual

Page 5

1.1.3 Warnings for drying

DANGER!

• Laundry that is previously washed, cleaned, soiled or stained with petrol / gasoline, dry cleaning solvents or other flammable or explosive substances must not be dried in the machine as they give out flammable or explosive steam. It may cause fire risk.

• Lint must not be allowed to accumulate around the dryer. Not applicable for appliances intended to be vented.

• DO NOT dry unwashed items in the dryer.

DANGER!

• Laundry stained with Liquid cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers must be washed in hot water with plenty of detergent before drying. It may cause fire risk.

• Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling,stacking or storing oil-affected items can prevent heat from escaping and so create a fire hazard.

DANGER!

• If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent – this will reduce, but not eliminate, the hazard.

• Foam rubber (latex foam), shower caps, waterproof textiles, clothes or pillows with rubber support or rubber foam pads must not be dried with drying function. It may cause fire risk.

• Fabric softeners or similar products should be used as specified by the fabric softener instructions.

• If you use washing ball, detergent scale, laundry clothing cages and balls in your machine, they can melt during drying. Do not use these products if drying option will be selected. It may cause fire risk.

• When you use industrial chemicals for cleaning, do not use drying function. It may cause fire risk.

5 / EN

Washer-Dryer / User’s Manual

Page 6

DANGER!

• Do not touch loading door glass with bare hands after drying. There is the risk of getting burnt.

• In order to maintain laundry in a temperature that will prevent them from getting damaged, a cooling step is performed as a final step to ensure items will not be damaged. You may be exposed to hot steam if you open the door before cooling is complete. There is the risk of scalding.

DANGER!

• If the drying programmes are interrupted (as a result of programme cancellation or power failure), laundry in the machine can be hot. Be careful.

WARNING!

• Never stop the tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.

CAUTION!

• Do not stop the machine before drying programme is completed. If you have to stop the machine, remove all laundry and lay them in a suitable place to let them cool down.

• Your product is suitable to operate in ambient temperatures between 0°C and +35°C.

CAUTION!

• Ambient temperatures between 15°C and +25°C are ideal temperatures for your product.

• Do not let pets enter the product. Check inside the product before using.

• Remove all items from the pockets such as lighters and matches.

• Do not overload the machine for drying. Observe the maximum load levels specified for drying.

PRECAUTION!

• Do not dry leather laundry or laundry that contains leather (such as leather jeans label). The colour from Leather parts can run into other textiles.

• In failures that cannot be repaired using information given in safety instructions, turn off the machine, unplug the power cable and call the Authorised Service Agent.

• You can just wash laundry, just dry laundry or wash and dry laundry in your washer-dryer. Machine must not be used only to dry wet loads for a long time. When machine is used only for drying, it must be operated empty without loading laundry in a short wash programme after every 15 operation.

• Check all clothes before loading them into the machine and ensure that they do not have objects such as lighters, coins, metal pieces, needles in the pockets or inside.

• Underwear with metal supports must not be dried in the machine. Metal supports might come off during drying and cause damage in the machine. Place in a bag or pillowcase.

6 / EN

Washer-Dryer / User’s Manual

Page 7

PRECAUTION!

• Do not dry large laundry such as tulle curtain, curtain, bedding, blanket, rug in the machine. Your laundry might get damaged.

INFORMATION

• Do not dry unwashed laundry in the machine.

• Do not use fabric softeners or static preventers in the machine unless recommended by the manufacturer.

• Products such as fabric softeners must be used in accordance with manufacturer’s instructions.

• Do not dry sensitive clothes such as silk, wool, etc. in the machine. Otherwise, wool clothes may get shrunken and other sensitive clothes may get damaged.

• Check symbols on the garment tag before washing and drying.

1.2 Intended use

1.3 Children's safety

CAUTION!

• Children below the age of 3 must be kept away from the machine unless they are continuously supervised.

• Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children.

• Electrical products are dangerous for the children. Keep children away from the product when it is in use. Do not allow them to play with the product. Use child lock to prevent children from intervening with the product.

• Do not forget to close the loading door when leaving the room where the product is located.

• Store all detergents and additives in a safe place away from the reach of the children by closing the cover of the detergent container or sealing the detergent package.

INFORMATION

• This product has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use.

• The product must only be used for washing, rinsing and drying of textile products that are marked accordingly.

• The manufacturer waives any responsibility arisen from incorrect usage or transportation.

7 / EN

Washer-Dryer / User’s Manual

Page 8

1.4 Compliance with WEEE

Directive and disposing of the waste product

This product does not contain harmful and forbidden materials described in the "Regulation on the Control of the Waste Electrical and Electronic Equipment". It complies with the WEEE Directive.

This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Therefore, do not dispose the product with normal domestic waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment. Please consult your local authorities to learn the nearest collection point.

Help protect the environment and natural resources by recycling used products. For children’s safety, cut the power cable and break the locking mechanism of the loading door so that it will be non-functional before disposing of the product. Compliance with RoHS Directive: The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

1.5 Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging with normal domestic waste. Take them to the packaging material collection points designated by the local authorities.

2 Your washer-dryer

2.1 Overview

1- Power cable 5- Loading door

2- Top panel 6- Filter cover

3- Control panel 7- Adjustable feet

4- Water discharge hose

8- Detergent drawer

8 / EN

Washer-Dryer / User’s Manual

Page 9

2.2 Package contents

Power cable

Water discharge hose

Transit bolts

Mains water inlet hose

Liquid detergent container (*)

User manual

Plastic plug group

INFORMATION

• Figures in this manual are schematic and may not match the product exactly.

(*) This may be supplied with the machine depending on the model of your product.

9 / EN

Washer-Dryer / User’s Manual

Page 10

2.3 Technical specifications

Supplier name or trademark Beko

Model name BWD7541IG

Maximum spin speed (rpm) 1400

Built-in No

Rated capacity - Washing (kg) of Dry clothes/laundry 7,5

Rated capacity - Drying (kg) of Dry clothes/laundry 4

Height (cm) 84

Width (cm) 60

Depth (cm) 59

Net weight (±4 kg.) 69

Single Water inlet / Double Water inlet

• Available

Electrical input (V/Hz) 220-240 V / 50Hz

Total current (A) 10

Total power (W) 2000-2350

VDE Main model code 9620

Technical specifications may be changed without prior notice to improve the quality of the product.

• / -

10 / EN

Washer-Dryer / User’s Manual

Page 11

3 Installation

To make the product ready for use, review the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.

DANGER!

• Make sure that the installation and electrical connections of the product are performed by competent persons. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons.

DANGER!

• Your product is too heavy for one person to carry.

CAUTION!

• Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.

• Do not place the product close to the edge if the floor contains steps. Do not also place the product on a platform.

• Do not place the product on the power cable.

• Do not install the product in environments where the temperature falls below 0 ºC.(See. Warnings for Drying)

• Leaving a gap at the sides of the machine is suggested to reduce vibration and noise

• In the area where this product is installed, there must not be a lockable, sliding or hinged door that will restrict the full opening of loading door.

• Operate the product in a well ventilated and dust free environment.

• Do not place heat sources such as Hobs, Irons, Ovens, etc. on the washing machine and do not use them on the product.

3.2 Removing packaging reinforcement

Tilt the machine backwards to remove the packaging reinforcement. Remove the packaging reinforcement attached to the ribbon.

PRECAUTION!

• Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer’s responsibility.

• Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.

3.1 Appropriate installation location

• Place the product on a solid and level floor. Do not place it onto a carpet with high pile or other similar surfaces.

11 / EN

DANGER!

• Your product is heavy. Remove packaging reinforcement as displayed in the figure.

• Be careful not to get your hand caught under the machine during this procedure.

3.3 Removing the transit bolts

PRECAUTION!

• Do not remove the transit bolts before removing the packaging reinforcement.

• Remove the transit bolts before operating the washing machine! Otherwise, the product will get damaged.

Washer-Dryer / User’s Manual

Page 12

1 2 3

1 Use a tool to

loosen all bolts until they rotate freely.

2 Remove the transit

bolts by turning them slightly.

3 Attach the plastic

covers supplied in the user manual bag into the holes on the rear panel.

INFORMATION

• Keep the transit bolts in a safe place to reuse when the product needs to be moved again in the future.

• Never move the product without the transit bolts properly fixed in place!

3.4 Connecting water supply

CAUTION!

• Models with a single water inlet should not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate.

• Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.

1 Connect the special

hose supplied with the product to the water inlet on the product.

CAUTION!

• Ensure that the cold water connection is made correctly when installing the product. Otherwise, your laundry will come out hot at the end of the washing process and wear out.

2 Tighten the hose

nuts securely by hand. Never use a tool when tightening the nuts.

INFORMATION

• The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa). It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your product run smoothly. Attach a pressure reducing valve if water pressure is higher.

12 / EN

3 Open the taps

completely after making the hose connection to check for water leaks at the connection points.

If any leak occurs, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. In order to prevent the water leaks, keep the taps closed when you do not use the product.

Washer-Dryer / User’s Manual

Page 13

3.5 Connecting to the drain

90 cm

• Attach the end of the drain hose directly to waste water drain, sink or bathtub.

3.6 Adjusting the feet

CAUTION!

• Your house will be flooded if the hose comes out of its housing during water discharge. Moreover, there is risk of scalding due to high washing temperatures! To prevent such situations and to ensure smooth water intake and discharge of the machine, fix the end of the discharge hose tightly so that it cannot displace.

90 cm

min.40

• Connect the hose to a minimum height of 40 cm and a maximum height of 90 cm.

• If the hose is run along the floor (or at less than 40 cm above it) and raised later on, water drain becomes difficult and laundry may come out extremely wet. Therefore, observe the heights described in the figure.

• To prevent flowing of dirty water back into the machine and to allow for easy discharge, do not immerse the hose end into the dirty water or do not drive it in the drain more than 15 cm. If it is too long, cut it short.

• The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the machine.

• If the length of the hose is too short, add an original extension hose. Length of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.

13 / EN

90 cm

CAUTION!

• Adjust feet so that the product will be balanced in the location it will be used.

• Balance the machine by adjusting the feet.

• Check for any play by pressing the product from upper diagonal edges.

• Otherwise, the product may move from its place and cause crushing, noise and vibration problems.

• Do not use any tools to loosen the lock nuts. Otherwise, the lock nuts may get damaged.

a) Loosen the lock nuts on the feet by hand. b) Adjust the feet until the product stands level

and balanced.

c) Tighten all lock nuts again by hand.

3.7 Electrical connection

Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

• Connection must comply with national regulations.

• The wiring for the electrical outlet circuit must be sufficient to meet the appliance requirements. Use of a Ground Fault Circuit Interrupter (GFCI) is recommended.

• Power cable plug must be within easy reach after installation.

Washer-Dryer / User’s Manual

Page 14

• If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16 Amp fuse.

• The voltage specified in the “Technical specifications” section must be equal to your mains voltage.

DANGER!

• Damaged power cables must be replaced by the Authorised Service Agent.

3.8 Transportation of the product

1 Unplug the product before transporting it. 2 Remove water drain and water

supply connections.

3 Drain all water that has remained

in the product. See 6.5

4 Install the transit bolts in reverse order of

the disassembly procedure. See 3.3

DANGER!

• Your product is too heavy for one person to carry.

• Your product is heavy; two persons must carry it and extra precaution taken on stairs. If your product falls on you, it may cause injuries.

CAUTION!

• Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children.

INFORMATION

• Never move the product without the

transit bolts properly fixed in place!

4 Preparation

4.1 Sorting the laundry

* Sort laundry according to type of

fabric, colour, and degree of soiling and allowable water temperature.

* Always observe the instructions given

on the garment care labels.

4.2 Preparing laundry for washing

• Laundry items with metal attachments such as, underwired bras, belt buckles or metal buttons will damage the machine. Remove the metal pieces or wash such clothes by putting them in a cotton laundry bag or cotton pillow case. Also these type of clothes can heat too much during drying and damage your other clothes. Do not dry such laundry in the machine.

• Put small size clothes such as infant's socks and nylon stockings in cotton a laundry bag or cotton pillow case.

• Place curtains in without compressing them. Remove curtain attachment items. Do not dry tulle curtains in your machine.

• Fasten zips, sew loose buttons and mend rips and tears.

• Wash “machine washable” or “hand washable” labelled products only with an appropriate programme. Dry these type of clothes by hanging or laying down. Do not dry them in the machine.

• Do not wash colours and whites together. New, dark coloured cottons release a lot of dye. Wash them separately.

• Only use the dyes / colour changers and descaling agents which are appropriate to machine wash. Always follow the instructions on the package.

14 / EN

Washer-Dryer / User’s Manual

Page 15

INFORMATION

• Laundry that is subjected to heavy deposits of materials such as flour, lime dust, milk powder, etc. Must be shaken off before placing into the machine. Such dusts and powders on the laundry may build up on the inner parts of the product in time and can cause damage.

• Keep laundry items made of Angora wool in the freezer for a few hours before washing. This will reduce pilling.

• Wash trousers and delicate laundry turned inside out.

• Tough stains must be treated properly before washing. If unsure, check with a dry cleaner.

• Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets inside out and brush. Such objects may damage the product or cause noise problem.

4.3 Tips for energy saving

Energy efficiency will be improved by using lower temperature programmes and appropriate detergents.

• Operate the product in the highest capacity allowed by the programme you have selected, but do not overload; see, "Programme and consumption table". See, “Programme and consumption table"

• Always follow the instructions on the detergent packaging.

• Wash slightly soiled laundry at low temperatures.

• Use faster programmes for small quantities of lightly soiled laundry.

• Do not use prewash and high temperatures for laundry that is not heavily soiled or stained.

• If you plan to dry your laundry in a dryer, select the highest spin speed recommended during washing process.

• Do not use more detergent than the recommended on the detergent packaging.

4.4 Initial use

Before starting to use the product make sure that all preparations are made in accordance with the “Important safety and environment instructions” and the instructions in the “Installation” section.

To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If this programme is not available in your machine, apply the method which is described in the section 6.2.

INFORMATION

• Use an anti-limescale product suitable for the washing machines.

• Some water may remain in the product due to the quality control processes in the production. It is not harmful for the product.

4.5 Correct load capacity

The maximum load capacity depends on the type of laundry, the degree of soiling and the desired washing programme. The product automatically adjusts the water amount according to the weight of the laundry put inside it.

CAUTION!

• Follow the information in the “Programme and consumption table”. When overloaded, machine’s washing performance will drop. Moreover, noise and vibration problems may occur. For a successful drying performance, do not dry more laundry than stated.

15 / EN

Washer-Dryer / User’s Manual

Page 16

type

Laundry

Bathrobe 1200 Hand towel 100

Fabric napkin 100 Women‘s night gown 200

Bed sheet 700 Underclothing 100

Bed sheet 500 Men’s overalls 600

Pillowcase 200 Men’s shirt 200

Tablecloth 250 Men’s pyjamas 500

Towel 200 Blouses 100

(g)

Weight

type

Laundry

4.6 Loading the laundry

1. Open the loading door.

2. Put the laundry items into the product in a loose manner.

3. Push the loading door to close until you hear a locking sound. Ensure that no items are caught in the door.

INFORMATION

• The loading door is locked while a

programme is running. The loading door is unlocked a while after the programme comes to an end. If the inside part of the machine is too hot at the end of the programme, loading door will not open until the temperature decreases.

CAUTION!

• If the laundry is misplaced, noise and vibration problems may occur in the machine.

4.7 Using detergent and softener

INFORMATION

• When using detergent, softener, starch,

fabric dye, bleach and descaling agents; read the manufacturer’s instructions written on the package and follow the dosages specified. Use a measuring cup if available.

4.7.1 Detergent drawer

The detergent drawer is composed

(g)

of three compartments:

Weight

– (1) for prewash – (2) for main wash – (3) for softener – ( ) in addition, there is a siphon piece in the softener compartment.

4.7.2 Detergent, softener and other cleaning agents

• Add detergent and softener before starting the washing programme.

• Never leave the detergent drawer open while the washing programme is running!

• When using a programme without prewash, do not put any detergent into the prewash compartment (compartment nr. "1").

• In a programme with prewash, do not put liquid detergent into the prewash compartment (compartment nr. "1").

• Do not select a programme with prewash if you are using a detergent bag or dispensing ball. Place the detergent bag or the dispensing ball directly among the laundry in the machine. Remove these if drying

• If you are using liquid detergent, do not forget to place the liquid detergent container into the main wash compartment (compartment nr. “2”).

• When machine is in Drying step, do not add any washing chemicals (Liquid detergent, Softener, etc.).

4.7.3 Choosing the detergent

Detergent type to be used depends on the fabric type and colour.

• Use different detergents for coloured and white laundry.

• Wash your delicate clothes only with special detergents (liquid detergent, wool shampoo, etc.) intended solely for delicate clothes.

• When washing dark coloured clothes and quilts, it is recommended to use liquid detergent.

• Wash woollens with special detergent made specifically for woollens.

16 / EN

Washer-Dryer / User’s Manual

Page 17

CAUTION!

• Use only detergents manufactured specifically for washing machines.

• Do not use Powdered Soap.

4.7.4 Adjusting the amount of detergent

The amount of washing detergent to be used depends on the amount of laundry, the degree of soiling and water hardness.

• Do not use amounts exceeding the dosage quantities recommended on the detergent package to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental protection.

• Use lesser detergent for small amounts or lightly soiled clothes.

4.7.5 Using softeners

Pour the softener into the softener compartment of the detergent drawer.

• Do not exceed the (>max<) level sign on the softener compartment.

• If the softener has lost its fluidity or the concentrated type, dilute it with water before putting it in the detergent drawer.

4.7.6 Using liquid detergents

4.7.6.1 If the product contains a liquid detergent container

• Put the liquid detergent container into the compartment no “2”.

• If the liquid detergent lost its fluidity, dilute it with water before putting it into the detergent container.

4.7.6.2 If the product does not contain a liquid detergent container

• Do not use liquid detergent for the prewash step in a programme with prewash.

• Liquid detergent stains your clothes when used with Delayed Start function. If you are going to use the Delayed Start function, do not use liquid detergent.

4.7.7 Using gel and tablet detergent

• If the gel detergent thickness is fluidal and your machine does not contain a special liquid detergent cup, put the gel detergent into the main wash detergent compartment during first water intake. If your machine contains a liquid detergent container, fill the detergent into this container before starting the programme.

• If the gel detergent thickness is not fluidal or in the shape of capsule liquid tablet, put it directly into the drum before washing.

• Put tablet detergents into the main wash compartment (compartment nr. "2") or directly into the drum before washing.

INFORMATION

• Tablet detergents may leave residues in

the detergent compartment. If you notice such residues, place the tablet detergent between the laundry, close to the lower part of the drum in future washings.

INFORMATION

• Use the tablet or gel detergent without

selecting the prewash function.

• Bear in mind that any plastic detergent

cup, bowl etc in the drum should be removed before drying..

17 / EN

4.7.8 Using laundry starch

• Add liquid starch, powder starch or the dyestuff into the softener compartment.

• Do not use softener and starch together in a washing cycle.

• Wipe the inside of the machine with a damp and clean cloth after using starch.

Washer-Dryer / User’s Manual

Page 18

4.7.9 Using bleaches

• Select a programme with prewash and add the bleach at the beginning of the prewash. Do not put detergent in the prewash compartment. As an alternative application, select a programme with extra rinse, add the bleach into an empty detergent drawer compartment and also add 1 glass of water from the same compartment when you see the rinsing step on the display for the first time.

• Do not use bleach and detergent by mixing them.

• Use just a little amount (approx. 50 ml) of bleaching agent and rinse the clothes very well as it causes skin irritation. Do not pour the bleach onto the laundry and do not use it with the coloured items.

4.8 Tips for efficient washing

Light Colours and

Whites

(Recommended temperature range based on soiling level: 40-90 oC)

It may be necessary to pre-treat the stains or perform prewash. Powder and liquid detergents recommended for whites can be used at dosages recommended for heavily soiled clothes. It is recommended to use powder

fruits and blood.)

Heavily Soiled

Soiling Level

Soiled

Normally

Lightly Soiled

detergents to clean clay and soil stains and the stains that are sensitive to bleaches.

(difficult stains such as grass, coffee,

Powder and liquid detergents recommended for whites can be used at dosages recommended for normally soiled clothes.

collars and cuffs)

caused by body on

(For example, stains

Powder and liquid detergents recommended for whites can be used at dosages recommended for lightly soiled clothes.

(No visible stains exist.)

• When using oxygen-based whitener, select a programme which washes the laundry at a low temperature.

• Oxygen-based whitener can be used with the detergent; however, if it is a different consistency, first put detergent in the compartment number “2” in the detergent dispenser and wait for the machine to flush the detergent when taking in water. While the product continues taking in water, add whitener in the same compartment.

4.7.10 Using limescale remover

• When required, use limescale removers manufactured specifically for washing machines only.

Clothes

Colours

(Recommended temperature range based on soiling level: cold -40 oC)

Powder and liquid detergents recommended for colours can be used at dosages recommended for heavily soiled clothes. It is recommended to use powder detergents to clean clay and soil stains and the stains that are sensitive to bleaches. Detergents which do not contain bleach should be used.

Powder and liquid detergents recommended for colours can be used at dosages recommended for normally soiled clothes. Detergents which do not contain bleach should be used.

Powder and liquid detergents recommended for colours can be used at dosages recommended for lightly soiled clothes. Detergents which do not contain bleach should be used.

Black/Dark

Colours

(Recommended temperature range based on soiling level: cold -40 oC)

Liquid detergents suitable for colours and dark colours can be used at dosages recommended for heavily soiled clothes.

Liquid detergents suitable for colours and dark colours can be used at dosages recommended for normally soiled clothes.

Liquid detergents suitable for colours and dark colours can be used at dosages recommended for lightly soiled clothes.

Delicates/

Woollens/Silks

(Recommended temperature range based on soiling level: cold

-30 oC)

Prefer liquid detergents produced for delicate clothes. Woollen and silk clothes must be washed with special woollen detergents.

18 / EN

Washer-Dryer / User’s Manual

Page 19

4.9 Tips for correct drying

Cottons Drying Synthetics Drying Babyprotect + Wash&Dry Wash&Wear

Durable Clothes with

Cotton-Content

Bed sheet, bedding, baby

clothes, t-shirt, sweatshirt,

durable knitted clothes,

denim, canvas trousers,

Types of Clothes

Synthetics Clothes (Polyester,

nylon, etc.)

Delicate (Silk, Woollens,

Cashmere, Angora wool,

etc. content) Clothes

shirts, cotton socks, etc.

It is recommended for the polyester, nylon, polyacetate, acryliccontent clothes. Drying is not recommended for the viscose-content clothes. Drying explanations in the maintenance label should be taken into

Not recommended!

account.

Not recommended!

Programmes

It washes and dries consecutively! Bed sheet, bedding, baby clothes, t-shirt, sweatshirt, durable knitted clothes, denim, canvas trousers, shirts, cotton socks, etc.

It is recommended for the polyester, nylon, polyacetate, acryliccontent clothes at low temperatures with the washing and drying warnings given in the maintenance label taken into consideration.

Not recommended!

It washes and dries consecutively! Bed sheet, bedding, baby clothes, t-shirt, sweatshirt, durable knitted clothes, denim, canvas trousers, shirts, cotton socks, etc.

It is recommended for the polyester, nylon, polyacetate, acryliccontent clothes at low temperatures with the washing and drying warnings given in the maintenance label taken into consideration.

Not recommended!

Clothes which are worn for a short period of time an unstained, such as shirts, t-shirts, sweatshirts, etc. A very small amount of laundry should be loaded.

Very slightly soiled and unstained shirts, t-shirts and synthetic content items. A very small amount of laundry should be loaded.

Not recommended!

19 / EN

Not recommended! It is not appropriate to dry bulky laundry inside the washing machine. Dry them by hanging or

Bulky laundry such as

quilts, coats, curtains, etc.

Not recommended! It is

not appropriate to dry bulky

laundry inside the washing

machine. Dry them by

hanging or laying down.

laying down.

Not recommended! It is not appropriate to dry bulky laundry inside the washing machine. Dry them by hanging or laying down.

Washer-Dryer / User’s Manual

Page 20

5 Operating the product

1 2 3 4 5 6

789

101112

5.1 Control panel

5.4 Selecting the washing programme

1. Determine the programme suitable for the type, quantity and soiling level of the laundry in accordance with the "Programme and consumption table".

2. Select the desired programme with the

Programme Selection

knob.

1 - Programme selection knob 2 - Temperature selection lights 3 - Spin speed selection lights 4 - Display 5 - Drying Programme Lights 6 - On / Off button 7 - Start / Pause button 8 - End Time Adjustment button 9 - Drying Level Adjustment button 10 - Auxiliary Function buttons 11 - Spin Speed Adjustment button 12 - Temperature Adjustment button 13 - Programme Selection lights

5.2 Display symbols

a b c d e

a- Washing indicator b - Rinsing indicator c - Spinning indicator d- Drying indicator e- End indicator f- No Water indicator g - Duration Information display h- Loading Door Lock indicator i- Child Lock indicator

5.3 Preparing the machine

1. Check if the hoses are connected tightly.

2. Plug in your machine.

3. Turn the tap on completely.

4.Place the laundry in the machine.

5. Add detergent and fabric softener.

INFORMATION

• Programmes are limited with the highest spin speed appropriate for that particular type of fabric.

• When selecting a programme, always consider the type of fabric, colour, soiling level and permissible water temperature.

• Always select the lowest appropriate temperature. Higher temperature means higher electricity consumption.

5.5 Washing programmes

Depending on the type of fabric, use the following main programmes.

INFORMATION

• You can set you machine to switch to drying step at the end of washing cycle by pressing the Drying button after you

have selected the washing programme for your laundry. Each time you press the button, info line shows at which step the drying process will take place and the relevant symbol will turn on. If you want, by continuing to press the button, you can perform drying for the maximum period of time allowed by the machine for drying.

• Symbols in the display are schematic and may not match the product exactly.

• When you will perform washing and drying by using the Drying function of your machine, load maximum 5 kg of laundry into the machine. If you load excessively, your laundry will not dry and machine will operate for a long time and consume more energy.

20 / EN

Washer-Dryer / User’s Manual

Page 21

• Cottons

Use for your cotton laundry (such as bed sheets, duvet and pillowcase sets, towels, bathrobes, underwear, etc.). Your laundry will be washed with vigorous washing action for a longer washing cycle.

INFORMATION

• You can dry your laundry after the washing cycle without any interruption (automatic or timed drying can be performed after washing). For this, you must also select the Drying function before starting the washing programme.

• According to the drying selections which you will add to the washing programmes, you can see when the programme will end on the display of the machine.

• If you don’t want drying to take place after the programme you have selected, press and hold the Drying auxiliary function button until the Drying light is turned off.

• Synthetics

Use to wash your synthetic clothes (shirts, blouses, synthetic/cotton blends, etc.). Your laundry will be washed with a gentle action for a shorter washing cycle when compared to the Cottons programme.

INFORMATION

• According to the drying selections which you will add to the washing programmes, you can see when the programme will end on the display of the machine.

• If you don’t want drying to take place after the programme you have selected, press and hold the Drying auxiliary function button until the Drying light is turned off.

• Wool

Use to wash your woollen laundry. Select the appropriate temperature complying with the tag of your clothes. Use appropriate detergents for woollens.

INFORMATION

• Drying function cannot be selected for the woollen wash programme.

• Cottons Eco

Use to wash your normally soiled, durable cotton and linen laundry. Although it washes longer than all other programmes, it provides significant energy and water savings. Actual water temperature may be different from the stated washing temperature. When you load the machine with less laundry (e.g. ½ capacity or less), programme duration may automatically get shorter. In this case, energy and water consumption will decrease more, providing a more economic wash. This programme is available in the models with the remaining time indicator. Normally soiled laundry may be washed with reduced amount of detergent to save energy and protect the environment.

INFORMATION

• According to the drying selections which you will add to the washing programmes, you can see when the programme will end on the display of the machine.

• If you don’t want drying to take place after the programme you have selected, press and hold the Drying auxiliary function button until the Drying light is turned off.

21 / EN

Washer-Dryer / User’s Manual

Page 22

•Daily / Quick

Use to wash your lightly soiled and unstained cotton laundry in a short time.

• Shirts

Use to wash the shirts made of cotton, synthetic and synthetic blended fabrics together.

INFORMATION

• According to the drying selections which you will add to the washing programmes, you can see when the programme will end on the display of the machine.

• If you don’t want drying to take place after the programme you have selected, press and hold the Drying auxiliary function button until the Drying light is turned off.

• Quick 14’

Use it to wash a small amount of lightly soiled cotton laundry in a short time. This programme washes your laundry in 14 minutes.

INFORMATION

• According to the drying selections which you will add to the washing programmes, you can see when the programme will end on the display of the machine.

• If you don’t want drying to take place after the programme you have selected, press and hold the Drying auxiliary function button until the Drying light is turned off.

INFORMATION

• According to the drying selections which you will add to the washing programmes, you can see when the programme will end on the display of the machine.

• If you don’t want drying to take place after the programme you have selected, press and hold the Drying auxiliary function button until the Drying light is turned off.

• Rinse

Use when you want to rinse or starch separately.

• Spin+Drain

Use to drain the water in the machine.

5.6 Temperature selection

Whenever a new programme is selected, the recommended temperature for the programme appears on the temperature indicator. It is possible that the recommended temperature value is not the maximum temperature that can be selected for the current programme. Press the button to change the temperature.

Temperature Adjustment

22 / EN

INFORMATION

• Temperature Adjustment button works only backwards. For example, when you want to select 60 0C when the display shows 40 0C you need to press the button for several times until you reach 60 0C by going backwards from 40 0C.

Washer-Dryer / User’s Manual

Page 23

INFORMATION

• If you scroll to Cold Wash option and press Temperature Adjustment button again, the recommended maximum temperature for the selected programme is displayed. Press the Temperature Adjustment button again to decrease the temperature.

Finally, Cold light indicating the cold wash option appears on the display. You can also change the temperature after the washing has started. You can select the desired temperature after washing starts but you must do this before heating step starts.

5.7 Spin speed selection

Whenever a new programme is selected, the spin speed recommended for the selected programme is displayed on the

Spin Speed

indicator.

INFORMATION

• It is possible that the recommended spin speed value is not the maximum spin speed that can be selected for the current programme.

Press the button to change the spin speed. Spin speed decreases gradually. Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display.

Spin Speed Adjustment

INFORMATION

• Spin Speed Adjustment button works only backwards. For example, when you want to select 1000 rpm when the display shows 800 rpm, you need to press the button for several times until you reach 1000 rpm by going backwards from 800 rpm.

INFORMATION

• Rinse Hold option is indicated with “ ” symbol and No Spin option

is indicated with “ ” symbol.

5.7.1 If you want to spin your laundry after the Rinse Hold function:

- Adjust the

- Press The programme resumes. Machine drains the water and spins the laundry. If you want to drain the water at the end of the programme without spinning, use

Spin Speed

Start / Pause / Cancel

No Spin

INFORMATION

function.

button.

• In programmes that do not allow

spin speed adjustment, when Spin Speed adjustment button is pressed, spin speed light does not change and the buzzer is heard.

You can also change the Spin Speed after the washing starts. You can select spin speed by pressing spin speed adjustment button after washing has started but before the spinning step.

5.7.2 Auxiliary function selection for drying

When a new programme is selected, press Auxiliary Function Selection button to adjust the drying option that is suitable for the selected washing programme.

INFORMATION

• In programmes that do not allow drying

adjustment, when Drying auxiliary function button is pressed drying light does not change and the buzzer is heard.

23 / EN

Washer-Dryer / User’s Manual

Page 24

INFORMATION

• Only for drying programmes, press Auxiliary Function Selection button to adjust the suitable drying option.

5.8 Drying programmes

CAUTION!

• Machine cleans the lint coming off

the laundry automatically during the drying cycle. Machine uses water during drying. For this reason, water tap of the machine should be open also in the drying programmes.

• When a new programme is selected,

press Auxiliary Function Selection button to adjust the drying option that is suitable for the selected washing programme.

INFORMATION

• Drying programmes contain spinning step. Your machine performs this process in order to shorten the drying time. When drying is selected, spin speed setting is in Maximum spin speed range.

• In programmes that do not allow drying adjustment, when Drying auxiliary function button is pressed drying light does not change and the buzzer is heard.

• Only for drying programmes, press Auxiliary Function Selection button to adjust the suitable drying option.

• While there is a water cut, both washing and drying could not be performed.

• Cotton Dry

Use to dry damp cotton laundry equivalent to 4 kg dry weight. This programme performs drying only.

INFORMATION

• In order to dry the laundry which contains only towels and bathrobes, load 4 kg laundry maximum.

• For the dry weights of the laundry, see Section 4, Step 4.5

5.9 Washing and drying programmes

CAUTION!

• Machine cleans the lint coming off the laundry automatically during the drying cycle. Machine uses water during drying. For this reason, water tap of the machine should be open also in the drying programmes.

• 4 Kg Wash & Dry

Use to wash cotton laundry up to 4 kg and dry it right after the washing cycle without making any other selection.

INFORMATION

• When this programme is selected, external Drying auxiliary function cannot be selected.

• Synthetic Dry

Use to dry damp synthetic laundry equivalent to 3 kg dry weight. This programme performs drying only.

INFORMATION

• For the dry weights of the laundry, see Section 4, Step 4.5

24 / EN

In 4 kg Wash & 4 kg Dry programme, it is recommended to load laundry until the level indicated in the above figure for ideal drying conditions (you will see the level arrow when you open the loading door).

Washer-Dryer / User’s Manual

Page 25

• Wash & Wear

Use to wash and dry 0.5 kg laundry (2 shirts) in 40 minutes or 1 kg laundry (5 shirts) in 60 minutes.

INFORMATION

• Wash&Wear programme is intended to quickly wash and dry the daily clothes which were worn for a short period of time and are not soiled. This programme is suitable for the laundry which contains thintexture and can dry quickly. (shirts, t-shirts)

• Other drying options or programmes should be used for the thick texture laundry which take longer to dry.

• Anti Allergy+ Wash & Dry

Use to wash and then immediately dry your laundry up to 2 kg which requires an anti-allergic and hygienic washing (baby clothes, bed sheets, bedding, underpants, etc. cotton items).

• Hygiene+ programme is tested and approved by “The British Allergy Foundation” (Allergy UK) in United Kingdom.

• Refresh

Use this programme to remove the odour on the laundry that are worn only for once and do not contain any stains or dirt. In the aeration programme, the ioniser function also gets activated and cleans your laundry.

• Drum Clean+

To clean the drum, operate the machine once in every one or two months without loading it. To obtain better results, put powder limescale remover for washing machines into the detergent compartment no. „2“. This programme contains a short drying step which is activated after the drum cleaning is over.

INFORMATION

5.10 Programme and consumption table (for washing)

Programme (°C)

Cottons

Cottons Eco 40** 7,5 77 0,840 1400 • 40-Cold

Synthetics

Wool 40 1,5 45 0,45 1200 40-Cold Quick 14’ 30 2 32 0,10 1400 • • 30-Cold

Daily/Quick

Shirts 60 3,5 45 0,85 800 • • • • 60-Cold

INFORMATION

Max. Load (kg)

Water Consumption

(l)

Energy Consumption

(kWh) 90 7,5 78 2,40 1400 • • • • 90-Cold 60 7,5 78 1,50 1400 • • • • 90-Cold 40 7,5 78 1,00 1400 • • • • 90-Cold

60 3 67 1,05 1200 • • • • 60-Cold 40 3 67 0,75 1200 • • • • 60-Cold

90 7,5 54 1,90 1400 • • 90-Cold 60 7,5 54 1,10 1400 • • 90-Cold 30 7,5 50 0,18 1400 • • 90-Cold

Auxiliary functions

Max. Speed***

Prewash

Anti Crease+

Pet Hair Removal

Selectable temperature range

°C

Drying

•

Note for test institutions:

Data required for performance tests shall be provided upon request.Requests can be e-mailed to the following address:

•

info.australialaundry@beko.com

Do not forget to provide the code, stock and serial numbers of the product to be tested in your request e-mail along with your contact information. Code, stock and serial numbers of the product is located on the type label attached to the inside of the door.

25 / EN

Washer-Dryer / User’s Manual

Page 26

• : Selectable. * : Automatically selected, no cancelling. ** : Energy Label programme ***: If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed.

- : See the programme description for maximum load.

INFORMATION

• The auxiliary functions in the table may vary according to the model of your machine.

• Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in mains voltage.

• You can see the washing duration on the display of your machine while selecting a programme. Depending on the amount of laundry you have loaded into your machine, there may be a difference of 1-1.5 hours between the duration shown on the display and the actual duration of the wash cycle. Duration will be automatically updated soon after the washing starts.

• “Selection patterns for auxiliary functions can be changed by the manufacturer. New selection patterns can be added or removed.”

• “The spin speed of your machine may vary according to the programme; this spin speed cannot exceed the max. spin speed of your machine.”

Programme and consumption table (for drying)

Programme (°C)

Cotton Dry Synthetic Dry Anti Allergy+ Wash & Dry 60 4 Kg Wash & Dry 60 Wash & Wear 20 Wash & Wear 30 Refresh - 1 - 0,40 - * Drum Clean+ 90 - 77 2,30 600 • 90

Max. Load (kg)

4 36 3,18

2 20 1,35

2 135 3,20

4 94 4,10

0,5 35 0,60

1 44 1,00

Water Consumption (l)

Energy Consumption (kWh)

Auxiliary

functions

Max. Speed***

Prewash

Anti Crease+

1400

1400 • * • • • • 90-30 1400 1000 • * • 30-Cold 1000 • * • 30-Cold

•

Drying level

Selectable temperature

range °C

Pet Hair Removal

Drying

Extra Dry

Cupboard Dry

Iron Dry

Time based drying - minutes * • • • • * • • • -

* • • • • 60-Cold

26 / EN

Washer-Dryer / User’s Manual

Page 27

5.11 Auxiliary function selection

Select the desired auxiliary functions before starting the programme. Whenever a programme is selected, lights of the auxiliary functions that can be selected together with that programme illuminate.

INFORMATION

• Light of the auxiliary function that cannot be selected with the selected programme does not illuminate. When you press the buttons of these auxiliary functions, buzzer is heard and selection is prohibited.

If the wash cycle has reached a point where you cannot select the auxiliary function, the function cannot be selected.

INFORMATION

• Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before starting the machine, the function selected first will be cancelled and the second auxiliary function selection will remain active. For example, if you want to select Quick Wash after you have selected the Prewash, Prewash will be cancelled and Quick Wash will remain active.

• An auxiliary function that is not compatible with the programme cannot be selected. (See “Programme and consumption table”)

• Some programmes have auxiliary functions that must be operated with the selected programme. Those functions cannot be cancelled. Auxiliary function light is already selected.

INFORMATION

• If the selected dampness level (Iron Dry, Cupboard Dry, Extra Cupboard Dry) cannot be reached at the end of the drying cycle, your machine will extend the programme duration automatically. Programme will last longer.

• If Timed-Drying is selected, programme is finished at the end of the drying period even if the laundry does not get dry.

• If the selected dampness level (Iron Dry, Cupboard Dry, Extra Cupboard Dry) is reached during drying cycle, or extra dryness is detected in the timed-drying options, programme will take a shorter time. Time decrease will be shown on the display.

• Prewash

A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water, detergent and time.

• Pet Hair Removal

This function helps to remove pet hair that remain on your garments more effectively. When you select this function, Prewash and Extra Rinse steps are added to the normal programme. Thus, washing is performed with more water (30%) and the pet hair is removed more effectively.

CAUTION!

• Never wash your pets in the washing machine.

• Anti Crease+

This function makes the garments in the machine at the end of the programme crease less. It adds special rotation movements to the programme, and once the cycle has ended, it provides aeration for your garments that will be effective up to 8 hours.

• Drying

This function enables drying of the laundry after washing. Check with which programmes this auxiliary function can be selected, from the programme table.

27 / EN

Washer-Dryer / User’s Manual

Page 28

5.12 Drying steps

5.12.1 Iron Dry

Drying is performed until the drying level reaches Iron Dry. It leaves clothes damp to touch so makes ironing easier.

5.12.2 Cupboard Dry

Drying is performed until the drying level reaches Cupboard Dry. Clothes are dried enough to put straight in the cupboard.

5.12.3 Extra Dry

Drying is performed until the drying level reaches Extra Cupboard Dry. A longer program for multi-layered or thick fabrics to be dried. eg bedsheets, towels, bathrobes & blankets.

5.13 Time display

Remaining time for the completion of the programme while it is running is displayed as “01:30” in hours and minutes format.

INFORMATION

• Programme time may differ from the values in section “Programme and consumption table” depending on the water pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected and the changes at the mains voltage.

5.14 End Time

INFORMATION

• Dryness level may change according to the mixture, material types, amount and dampness level of the laundry.

• Items which contain accessories such as lace, tulle, stones, beads, spacer, wire, etc. and high silk-content items should not be dried in the machine.

5.12.4 Time based drying-minutes

In order to reach the desired drying level at low temperature, you select any of 30, 90 and 150 minutes of drying periods.

INFORMATION

• When drying small amount of laundry (up to maximum 2 pieces), timed-drying steps in the Cottons or Synthetics drying programmes should be selected.

• If the laundry is not at the desired dryness level at the end of the drying programme, timed-drying can be selected to finish the process.

• When this function is selected, machine performs drying for the adjusted time irrespective of the drying level.

With the programme can be delayed up to 24 hours. After pressing estimated ending time is displayed. If the

Time

In order for the End Time function is activated and the programme is completed at the end of the specified time, you must press

Start / Pause

time. and remains illuminated continuously. If you want to cancel End Time function, press Time light turns off or press button to turn off and on the machine.

1. Open the loading door, place the

2. Select the washing programme,

3. Set the end time of your choice

4. Press

End Time

is adjusted,

Start / Pause

End Time

laundry and put detergent, etc.

temperature, spin speed and, if required, the auxiliary functions.

by pressing the

End Time

Start / Pause

starts. “:” symbol in the middle of the end time on the display starts flashing.

function, the startup of the

button, the programme's

End Time

button after adjusting the

button stops flashing

button until the End

End Time

light is illuminated.

light illuminates.

On / Off

button.

button. Time countdown

End

28 / EN

Washer-Dryer / User’s Manual

Page 29

1400

800

1000

600

150’

Ütü Kuruluğu

Dolap Kuruluğu

Extra Kurutma

90’

20°

30’

8.5

10.5

Malzeme rengi ARC 716

Colour of material is ARC 716

%DVN×UHQJL3DQWRQH& 3ULQWLQJFRORULV3DQWRQH&

INLAY STOCK NO: 2846559001

1400

800

1000

600

150’

Ütü Kuruluğu

Dolap Kuruluğu

Extra Kurutma

90’

20°

30’

1400

800

1000

600

150’

Ütü Kuruluğu

Dolap Kuruluğu

Extra Kurutma

90’

20°

30’

8.5

10.5

Malzeme rengi ARC 716

Colour of material is ARC 716

%DVN×UHQJL3DQWRQH& 3ULQWLQJFRORULV3DQWRQH&

INLAY STOCK NO: 2846559001

1400

800

1000

600

150’

Ütü Kuruluğu

Dolap Kuruluğu

Extra Kurutma

90’

20°

30’

1400

800

1000

600

150’

Ütü Kuruluğu

Dolap Kuruluğu

Extra Kurutma

90’

20°

30’

8.5

10.5

Malzeme rengi ARC 716

Colour of material is ARC 716

%DVN×UHQJL3DQWRQH& 3ULQWLQJFRORULV3DQWRQH&

INLAY STOCK NO: 2846559001

1400

800

1000

600

150’

Ütü Kuruluğu

Dolap Kuruluğu

Extra Kurutma

90’

20°

30’

1400

800

1000

600

150’

Ütü Kuruluğu

Dolap Kuruluğu

Extra Kurutma

90’

20°

30’

8.5

10.5

Malzeme rengi ARC 716

Colour of material is ARC 716

%DVN×UHQJL3DQWRQH& 3ULQWLQJFRORULV3DQWRQH&

INLAY STOCK NO: 2846559001

1400

800

1000

600

150’

Ütü Kuruluğu

Dolap Kuruluğu

Extra Kurutma

90’

20°

30’

INFORMATION

• Do not use liquid detergents when you activate End Time function! There is the risk of staining of the clothes.

• Door keeps locked during the End Time countdown period. In order to unlock the door, machine should be switched to the pause mode by pressing the programme start/pause button. At the end of the countdown, End Time indicator turns off, washing cycle starts and the time of the selected programme appears on the display.

• When the End Time selection is completed, the time appearing on the display consists of end time plus the duration of the selected programme.

5.15 Starting the programme

5.17 Changing the selections after programme has started

5.17.1 Adding laundry after the programme has started:

If the water level in the machine is suitable when you press

Start / Pause

button, “Loading door locked” light on the panel is turned off. If the water level in the machine is not suitable when you press

Start / Pause

button, the panel

will indicate that the loading door is locked.

5.17.2 Switching the machine to pause mode:

1. Press

Start / Pause

button

to start the programme.

2. The light of

Start / Pause

button which was flashing starts to illuminate steadily now, indicating that the programme has started.

3. Loading door is locked. "Locking the Door" appears on the display when the door is being locked.

5.16 Loading door lock

There is a locking system on the loading door of the machine that prevents opening of the loading door in cases when the water level is unsuitable for door opening. "Loading door locked" light in the panel turns on when the loading door is locked.

29 / EN

Press the

Start / Pause

button to

switch the machine to pause mode.

5.17.3 Changing the programme selection after programme has started:

Changing the programme is not allowed when a programme is already running. If you turn the

Programme Selection

knob while the programme is running, buzzer is heard and change is prohibited. You can select the new programme after switching the current programme to pause mode.

INFORMATION

• The newly selected programme starts from beginning.

Washer-Dryer / User’s Manual

Page 30

5.17.4 Changing the

1400

800

1000

600

150’

Ütü Kuruluğu

Dolap Kuruluğu

Extra Kurutma

90’

20°

30’

8.5

10.5

Malzeme rengi ARC 716

Colour of material is ARC 716

%DVN×UHQJL3DQWRQH& 3ULQWLQJFRORULV3DQWRQH&

INLAY STOCK NO: 2846559001

1400

800

1000

600

150’

Ütü Kuruluğu

Dolap Kuruluğu

Extra Kurutma

90’

20°

30’

auxiliary function, spin speed and temperature

Depending on the step the programme has reached, you can cancel or select auxiliary functions. See, "Auxiliary function selection". Also, you can change the spin speed, temperature and drying settings. See, "Spin speed selection" and "Temperature selection".

INFORMATION

• The loading door will not open if the water temperature in the machine is high or the water level is above the loading door baseline.

5.18 Child Lock

Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes in a running programme.

5.18.2 To deactivate the child lock:

Press and hold 2nd and 3rd auxiliary function buttons for 3 seconds.

After the countdown as "Child Lock 3-21" on the display is over, "Child Lock Enabled" is turned off on the display.

5.19 Cancelling the programme

INFORMATION

• You can switch the machine on and off with On / Off button when the Child Lock is active. When you switch on the machine again, programme will resume from where it has stopped.

• Machine will give an audio alarm when the buttons are pressed if the child lock is active.

5.18.1 To activate the child lock:

Press and hold 2nd and 3rd auxiliary function buttons for 3 seconds.

the countdown as "Child Lock 3-2-1" on the display is over, "Child Lock Enabled" appears on the display. You can release

2nd and 3rd Auxiliary Function

when this warning is displayed.

30 / EN

After

buttons

The programme is cancelled when the machine is turned off and on again. Press and hold

On / Off

button for 3 seconds. After the countdown as "3-2-1" on the display is over, the machine turns off.

INFORMATION

• If you press On / Off button when the Child Lock is active, the programme will not be cancelled. You should cancel the child lock first. Countdown as “3-2-1” appears on the display.

• If you want to open the loading door after you have cancelled the programme but it is not possible to open the loading door since the water level in the machine is above the loading door baseline, then turn the Programme Selection knob to Pump+Spin programme and drain the water in the machine.

Washer-Dryer / User’s Manual

Page 31

5.20 End of programme

When the programme is over the End of Programme indicator illuminates and a buzzer is heard. If you do not press any button for 2 minutes, the machine will switch to standby mode. Display and all indicators are turned off. If you press any button or turn the

Selection

standby mode, programme steps that are completed will appear on the display.

knob when the machine is in

Programme

5.21 Your machine features a "Standby Mode".

After you switch on your machine with OnOff button, if no programme is started or no other procedure is performed at the selection step or no action is taken within approx. 2 minutes after the selected programme ends, your machine will switch to energy saving mode automatically. Also, if your product has a display that shows programme time, this display will be completely turned off. If you turn the Programme Selection knob or touch any button, lights and display will switch back to previous condition. The selections which you make when exiting from the energy efficiency may change. Please check the correctness of your selections before starting the programme. If necessary, please make your settings again.

6 Maintenance and cleaning

Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals.

6.1 Cleaning the detergent drawer

Clean the detergent drawer at regular intervals (every 4-5 washing cycles) as shown below in order to prevent accumulation of powder detergent in time.

1 Remove the siphon by lifting it from behind

as shown in the picture. After performing the below mentioned cleaning procedures, replace the siphon back to its seating and push its front section downwards to make sure that the locking tab engages.

INFORMATION

• If more than normal amount of water and softener mixture remains in the softener compartment, the siphon must be cleaned.

2. Wash the detergent drawer and the siphon with plenty of lukewarm water in a washbasin. In order to prevent the residues to contact your skin, clean it with an appropriate brush by wearing a pair of gloves.

3 Insert the drawer back into its place after

cleaning and make sure that it is seated well.

31 / EN

6.2 Cleaning the loading door and the drum

A washer dryer produces combustible lint; therefore cleaning the door and rubber gasket after each wash is important. Use a soft damp cloth to wipe the door, cleaning any water marks or residue off it. Wipe the rubber seal around the door. Remove any items or lint accumulating in the bottom of the seal catchment and wipe out any water accumulated here. If this is not cleaned out, unpleasant odours can also develop. For products with drum cleaning programme, please see Operating the product - Programmes.

Washer-Dryer / User’s Manual

Page 32

INFORMATION

• Repeat Drum Cleaning process in every 2 months or whenever there’s excessive lint build up on the rubber gasket and drum, that could adversely affect washing & drying performance.

• Use an detergent /anti-limescale suitable for the washing machines.

After every washing and drying make sure that no foreign substance is left in the drum.

INFORMATION

• Foreign metal substances will cause rust stains in the drum. Clean the stains on the drum surface by using cleaning agents for stainless steel. Never use steel wool or wire wool.

CAUTION!

• Never use sponge or scrub materials.

These will damage the painted, chrome and plastic surfaces.

6.3 Cleaning the body and control panel

Wipe the body of the machine with soapy water or non-corrosive mild gel detergents as necessary, and dry with a soft cloth. Use only a soft and damp cloth to clean the control panel.

6.4 Cleaning the water intake filters

There is a filter at the end of each water intake valve at the rear of the machine and also at the end of each water intake hose where they are connected to the tap. These filters prevent foreign substances and dirt in the water to enter the washing machine. Filters should be cleaned if they are dirty.

1. Close the taps.

2. Remove the nuts of the water intake hoses to access the filters on the water intake valves. Clean residues on them with an appropriate brush. If the filters are too dirty, remove them from their places with a pliers and clean in this way.

3. Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under running water.

4. Replace the gaskets and filters carefully in their places and tighten the hose nuts by hand.

6.5 Draining remaining water and cleaning the pump filter

The filter system in your machine prevents solid items such as buttons, coins and fabric fibres clogging the pump impeller during discharge of washing water. Thus, the water will be drained without any problem and the service life of the pump will extend. If the machine fails to drain water, the pump filter is clogged. Filter must be cleaned whenever it is clogged or in every 3 months. Water must be drained off first to clean the pump filter. In addition, prior to transporting the machine (e.g., when moving to another house) and in case of freezing of the water, water may have to be drained completely.

CAUTION!

• Foreign substances left in the pump filter may damage your product or may cause noise problem.

• If the product is not being used, shut the tap, remove mains hose and drain the water inside the machine in places where there is the risk of the product freezing .

• After each use, turn off the water tap to which the mains hose is connected.

32 / EN

Washer-Dryer / User’s Manual

Page 33

1. In order to clean the dirty filter and discharge the water, unplug the machine to cut off the supply power.

CAUTION!

• Temperature of the water inside the machine may rise up to 90 ºC. To avoid the risk of burning, clean the filter after the water inside the machine is cooled down.

2. Open the filter cover. Press the tab in the direction of the arrow and pull the cover out towards yourself.

3.To drain the water in the machine.

a. In order to collect the water to flow

out of the filter, place a large shallow vessel in front of the filter.

b. Turn and loosen the pump filter until

water starts to flow (counterclockwise). Fill the flowing water into the container you have placed in front of the filter. Always keep a piece of cloth handy to absorb any spilled water.

c When the water inside the machine is finished,

take out the filter completely by turning it.

4. Clean any residues inside the filter as well

as fibres, if any, around the pump impeller region.

5. Replace the filter.

6. Close the filter cover.

7 Troubleshooting

Programmes do not start after the loading door is closed.

• Start / Pause / Cancel button is not pressed.>>> Pause/Cancel button.

• It may be difficult to close the loading door in case of excessive loading.>>> that the loading door is closed properly.

*Reduce the amount of laundry and make sure

Programme cannot be started or selected.

• Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc. >>> and hold On/Off button for 3 seconds to reset the machine to factory settings. (See. “Cancelling the programme”)

Water in the machine.

• Some water may remain in the product due to the quality control processes in the production. >>> water is not harmful to the machine.

There is water leaking from the bottom of the machine.

• There is a problem with hoses or the pump filter. >>> the seals of the water inlet hoses are securely fitted. Attach the hose to the tap tightly.

• Pump filter is not closed securely. >>> pump filter is closed securely.

Machine does not fill with water.

• Tap is turned off. >>>

• Water inlet hose is bent. >>>

• Water inlet filter is clogged. >>>

• Loading door is not closed. >>>

Turn on the taps.

Flatten the hose.

Clean the filter.

Close the loading door.

Machine does not drain water.

• Water drain hose is clogged or twisted. >>> the hose.

• Pump filter is clogged. >>>

Clean the pump filter.

Machine vibrates or makes noise.

• Machine is standing unbalanced. >>> the machine.

• A hard substance has entered into the pump filter. >>> the pump filter.

• Transit bolts are not removed. >>>

• Laundry quantity in the machine is too little. >>> laundry to the machine.

• Machine is overloaded with laundry. >>> the laundry from the machine or distribute the load by hand to balance it.

• Machine is in contact with a rigid surface. >>> the machine is not contacting anything.

Remove the transit bolts.

Machine stopped shortly after the programme started.

• Machine has stopped temporarily due to low voltage. >>> will resume running when the voltage restores to the normal level.

*Press Start/

Press

This is not a failure;

Be sure

Make sure that the

Clean or flatten

Adjust the feet to level

Clean

Add more

Take out some of

Make sure that

33 / EN

Washer-Dryer / User’s Manual

Page 34

Machine directly discharges the water it takes in.

• Draining hose is not at adequate height. >>> water draining hose as described in the user manual.

Connect the

No water can be seen in the machine during washing.

• The water level is not visible from outside of the washing machine. This is not a failure.

Loading door cannot be opened.

• Loading door lock is activated because of the water level in the machine. >>> programme.

• Machine is heating up the water or it is at the spinning cycle. >>>

• Loading door lock is engaged. Loading door lock will be deactivated a couple of minutes after the programme comes to an end. >>> the loading door lock.

• Loading door may be stuck because of the pressure it is subjected to. >>> loading door to release and open it.

Drain the water by running the Pump or Spin

Wait until the programme completes.

Wait for a couple of minutes for deactivation of

Grab the handle and push and pull the

Washing takes longer than specified in the user manual.(*)

• Water pressure is low. >>> adequate amount of water to prevent poor washing quality due to the decreased amount of water. Therefore, the washing time extends.

• Voltage is low. >>> washing results when the supply voltage is low.

• Input temperature of water is low. >>> up the water extends in cold seasons. Also, washing time can be lengthened to avoid poor washing results.

• Number of rinses and/or amount of rinse water have increased. >>>

Machine increases the amount of rinse water when good

rinsing is needed and adds an extra rinsing step if necessary.

• Excessive foam has occurred and automatic foam absorption system has been activated due to too much detergent usage. >>>

Use recommended amount of detergent.

Machine waits until taking in

Washing time is prolonged to avoid poor

Required time to heat

Programme time does not countdown. (On models with display) (*)

• Timer may stop during water intake. >>> not countdown until the machine takes in adequate amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water. Timer indicator will resume countdown after this.

• Timer may stop during heating step. >>> will not countdown until the machine reaches the selected temperature.

• Timer may stop during spinning step. >>> unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.

Timer indicator will

Timer indicator

Automatic

Programme time does not countdown. (*)

• Laundry is unbalanced in the machine. >>> unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.

Automatic

Machine does not switch to spinning step. (*)

• Laundry is unbalanced in the machine. >>> unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.

• The machine will not spin if water is not drained completely. >>>

Check the filter and the draining hose.

• Excessive foam has occurred and automatic foam absorption system has been activated due to too much detergent usage. >>>

Use recommended amount of detergent.

Automatic

Washing performance is poor: Laundry turns grey. (**)

• Insufficient amount of detergent has been used over a long period of time. >>> detergent appropriate for water hardness and the laundry.

• Washing has been performed at low temperatures for a long time. >>> washed.

• Insufficient amount of detergent is used with hard water. >>> Using insufficient amount of detergent with hard water causes the soil to accumulate on the clothes over time and turns them grey. It is difficult to eliminate greying once it happens. Use the recommended amount of detergent appropriate for water hardness and the laundry.

• Excessive amount of detergent has been used. >>> recommended amount of detergent appropriate for water hardness and the laundry.

Select the proper temperature for the laundry to be

Use the recommended amount of

Use the

Washing performance is poor: Stains persist or the laundry is not whitened. (**)

• Insufficient amount of detergent is used. >>> recommended amount of detergent appropriate for the laundry.

• Excessive laundry is loaded in. >>> excess. Load with amounts recommended in the "Programme and consumption table".

• Wrong programme and temperature were selected. >>> Select the proper programme and temperature for the laundry to be washed.

• Wrong type of detergent is used. >>> appropriate for the machine.

• Detergent is put in the wrong compartment. >>> detergent in the correct compartment. Do not mix the bleaching agent and the detergent with each other.

Do not load the machine in

Use original detergent

Use

Put the

Washing performance is poor: Oily stains appeared on the laundry. (**)

• Regular drum cleaning is not applied. >>> regularly. For this, please see 6.2.

Clean the drum

Washing performance is poor: Clothes smell unpleasantly. (**)

• Odours and bacteria layers are formed on the drum as a result of continuous washing at lower temperatures and/or in short programmes. >>> loading door of the machine ajar after each washing. Thus, a humid environment favorable for bacteria cannot occur in the machine.

Leave the detergent drawer as well as the

34 / EN

Washer-Dryer / User’s Manual

Page 35

Colour of the clothes faded. (**)

• Excessive laundry was loaded in. >>> in excess.

• Detergent in use is damp. >>> an environment free of humidity and do not expose them to excessive temperatures.

• A higher temperature is selected. >>> programme and temperature according to the type and soiling level of the laundry.

Do not load the machine

Keep detergents closed in

Select the proper

Washing machine does not rinse well.

• The amount, brand and storage conditions of the detergent used are inappropriate. >>> the washing machine and your laundry. Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.

• Detergent is put in the wrong compartment. >>> is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener steps. Put the detergent in the correct compartment.

• Pump filter is clogged. >>>

• Drain hose is folded. >>>

Use a detergent appropriate for

If detergent

Check the filter.

Check the drain hose.

Laundry became stiff after washing. (**)

• Insufficient amount of detergent is used. >>> amount of detergent for the water hardness can cause the laundry to become stiff in time. Use appropriate amount of detergent according to the water hardness.

•

Detergent was mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the drawer with hot water.

Using insufficient

If detergent

Laundry does not smell like the softener. (**)

•

Detergent was mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the drawer with hot water.

If detergent

Detergent residue in the detergent drawer. (**)

• Detergent was put in wet drawer. >>> drawer before putting in detergent.

• Detergent has gotten damp. >>> an environment free of humidity and do not expose them to excessive temperatures.

• Water pressure is low. >>>

• The detergent in the main wash compartment got wet while taking in the prewash water. Holes of the detergent compartment are blocked. >>> they are clogged.

• There is a problem with the detergent drawer valves. >>> the Authorised Service Agent.

•

Detergent was mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the drawer with hot water.

Check the water pressure.

Dry the detergent

Keep detergents closed in

Check the holes and clean if

Call

There is detergent left on the laundry. (**)

• Excessive laundry was loaded in. >>> in excess.

• Wrong programme and temperature were selected. >>> Select the proper programme and temperature for the laundry to be washed.

• Wrong detergent was used. >>> for the laundry to be washed.

Do not load the machine

Select the proper detergent

Too much foam forms in the machine. (**)

• Improper detergents for the washing machine is used. >>> Use detergents appropriate for the washing machine.

• Excessive amount of detergent is used. >>> amount of detergent.

• Detergent was stored under improper conditions. >>> Store detergent in a closed and dry location. Do not store in excessively hot places.

• Some meshed laundry such as tulle may foam too much because of their texture. >>> detergent for this type of item.

• Detergent was put in the wrong compartment. >>> detergent in the correct compartment.

• Softener is being taken early. >>> in the valves or in the detergent drawer. Call the Authorised Service Agent.

Use only sufficient

Use smaller amounts of

Put the

There may be problem

Foam is overflowing from the detergent drawer.

• Excessive amount of detergent is used. >>>> tablespoonful softener and ½ L water and pour into the main wash compartment of the detergent drawer.

• Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme and consumption table". When you use additional chemicals (stain removers, bleaches and etc), reduce the amount of detergent.

Mix 1

Laundry remains wet at the end of the programme. (*)

• Excessive foam has occurred and automatic foam absorption system has been activated due to too much detergent usage. >>>

Use recommended amount of detergent.

35 / EN

Washer-Dryer / User’s Manual

Page 36

Drying lasts too long.

• Excessive laundry loaded. >>> Do not load the machine

in excess.

• Laundry is not spun enough.>>> Spin at a higher spin

speed in washing step in the Dryer-Washing Machine.

• Tap is turned off. >>> Turn on the taps.

Laundry is still damp after drying.

• An appropriate programme according to laundry type might is not selected.>>>Check care labels on

clothes and select an appropriate programme or use timed programmes in addition.

• Excessive laundry loaded. >>> Do not load the machine

in excess.

• Laundry is not spun enough.>>> Spin at a higher spin

speed in washing step in the Dryer-Washing Machine.

Machine does not start or programme cannot be started.

• Power cable is not connected. >>> Make sure the power

cable is connected.

• Programme is not set or Start / Pause / Cancel button is not pressed. >>> Make sure the programme is set and

it is not in Stand-by mode.

• Child lock enabled. >>> Disable Child lock.

Loading door cannot be opened.

Your machine’s door is not opened for safety

reasons.>>>If door locked indicator is still active on display

after drying, machine keeps the loading door locked until it cools for your safety.

(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun. (**) Regular drum cleaning is not applied.

>>> Clean the drum regularly. See 6.2

CAUTION!

• If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorised Service Agent. Never try to repair a nonfunctional product yourself.

36 / EN

Washer-Dryer / User’s Manual

Page 37

www.beko.com

www.beko.com.au

Beko BWD7541IG User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual