Beko BSS 4600 TT User Manual
Water Dispenser
User Manual
BSS 4600 TT
Please read this user manual first!
Dear Customer,
Thank you for preferring a Beko product. We hope that you get the best results from your product which
has been manufactured with high quality and state-of-the-art technology. Therefore, please read this
entire user manual and all other accompanying documents carefully before using the product and keep
it as a reference for future use. If you handover the product to someone else, give the user manual as
well. Follow all warnings and information in the user manual.
Symbol meanings
Following symbols are used in the various parts of this manual:
Important information and useful hints
C
A
about usage.
Warning for hazardous situations with
regard to life and property.
This product has been manufactured in environmental friendly modern plants without
giving any harm to the nature.
Complies with the WEEE Regulation. Does not contain PCB.
Made in P.R.C.
CONTENTS
1 Important instructions for safety
and environment 4-8
1.1. General safety . . . . . . . . . . . . . . . . . . . 4
1.2 Compliance with the WEEE Regulation . . 8
1.3 Package information . . . . . . . . . . . . . . .8
1.4 Things to be done for saving energy. . . . 8
2 Your Water Dispenser 9-10
2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . 9
2.1.1 Controls and parts . . . . . . . . . . . . . . . 9
3 Operation 11-12
3.1 Initial use . . . . . . . . . . . . . . . . . . . . . . 11
3.1.1 Preparations to be one prior to the
initial use . . . . . . . . . . . . . . . . . . . .11
3.1.2 Things to be done in order to get
hot water . . . . . . . . . . . . . . . . . . . .11
3.1.3 Things to be done in order to get
cold water. . . . . . . . . . . . . . . . . . . . 11
3.1.4 Display Information . . . . . . . . . . . . .12
3.1.5 There is no pump and water . . . . . . . 12
4 Cleaning and maintenance 13
4.1 Cleaning. . . . . . . . . . . . . . . . . . . . . . . 13
5 Troubleshooting 14
Water Dispenser / User Manual
3 / 14 EN
1 Important instructions for safety and environment
This section includes safety instructions that will help ensure the
protection from risks of personal
injuries or materialistic damages.
Failure to follow these instructions
shall void the warranty.
1.1 General safety
• Do not use this product outdoors
or in the bathroom.
• We shall not be held responsible
or accept the warranty claims for
the damages arising from misuse
or inconvenient transportation of
the product.
• Do not disassemble the product.
We shall not accept the warranty
claims for the damages due to
misuse.
• Always use the appliance on a
balanced, flat, clean, dry and non
slip surface.
• This appliance must not be ope-
rated with an external timer or
a separate remote controller
system.
• Prior to operating your water
dispenser, please read the user
manual carefully that includes
important information such as
installation, usage and maintenance of your product.
• Your Beko Water Dispenser
conforms to the valid safety
standards; therefore in order to
prevent any danger, when the
appliance or the power cable is
damaged, they must be repaired
or replaced by the authorized
service. Faulty or insufficient
repairing procedures might cause
dangers and risks to the user.
• Make sure that your mains power
supply is in conformity with the
information given on the rating
plate of the appliance. The only
way to disconnect the appliance
from the power supply is to unplug it.
• Connect the appliance to a gro-
unded socket.
• Do not use it if the power cable or
the product is damaged.
• Do not use this product with an
extension cable.
• Before connecting it to power
and mounting its parts, dry the
product and all the parts of it.
• Do not touch the appliance or its
plug when your hands are damp
or wet.
• Place the product so that it can
always reach the electrical outlet.
4 / 14 EN
Water Dispenser / User Manual
1 Important instructions for safety and environment
• In order to prevent the power
cable from getting damaged,
make sure that it doesn't get
stuck, twisted or rub against
sharp surfaces. Keep the power
cable away from hot surfaces and
open flame.
• Make sure that the power cable
doesn't accidentally get unplugged or someone doesn't trip over
the cable during the operation of
the appliance.
• If there is a breakdown after using
the product, unplug it.
• Always unplug the appliance
before cleaning and never clean it
while the appliance is being used.
• Never operate any part of this
appliance on or near hot surfaces
such as gas stoves, electric stoves or heated ovens or place it on
these surfaces.
• Never use the appliance at or
near the places where there are
explosive or inflammable atmosphere or materials.
• The ambient temperature of the
room where your water dispenser is placed must be between
10 - 43 ˚C. Operating your water
dispenser under cooler or warmer
conditions is not recommended
with regard to its efficiency.
• Leave an open space of minimum
15 cm. at the back of the water
dispenser to ensure proper ventilation.
• If two water dispensers are to be
installed side by side, there should be at least 2 cm distance between them.
• Your water dispenser is supposed
to operate and stop without vibration. Make sure that your water
dispenser is balanced on a horizontal and steady surface. This
should be done before the water
bottle is placed.
• Your water dispenser is cleaned
at the manufacturing plant after
the production. Moreover, the
product is put into service after
being cleaned by our authorized
services with the Special Cleaning Agent during the installation.
Water Dispenser / User Manual
5 / 14 EN
Loading...