Beko BFFD1577 Instructions Of Use
Frost Free
Built-In Freezer
Instruction of use
BFFD1577
EN
Please read these instructions first before using your
appliance
Thank you for choosing a Beko appliance.
Please take some time to read this user manual before using your appliance,
to ensure you know how to safely operate the controls and functions.
Carefully follow all unpacking and installation instructions to ensure the
appliance is correctly connected and fitted prior to use.
Please write your product model and serial number on the last page of this
user manual, and store in a safe location close to the appliance for easy
future reference.
This user manual may also be applicable for several other models.
Differences between models will be listed.
If you have any questions or concerns, please call our contact centre or find
help and information online at www.beko.co.uk.
Explanation of symbols used throughout this User Manual
- The terminal in the plug is marked with the symbol.
- Important information or useful usage tips.
C
- Symbol for waste electrical and electronic equipment.
- Some installation steps in furniture are marked with the symbol
of attention.
- The freezer compartment is marked with the symbol.
CONTENTS
1 Your refrigerator 4
2 Warnings 5
Electrical requirements ....................... 6
Warning! This appliance must be
earthed .............................................. 6
Energy saving tips .............................6
3 Installation
Disposing of the packaging ...............7
Disposing of your old appliance ......... 7
Placing and Installation ...................... 7
Transportation instructions ...................7
Installation instructions .......................
Reversing the door ..........................12
7
8
4 Before operating
Final Check .....................................13
13
5 Operating the product 14
Control Panel .................................. 14
Storing Frozen Food ........................14
Freezing Fresh Food ........................15
Making ice cubes ............................15
Defrosting ........................................ 15
6 Maintenance and
cleaning
7 Do’s and Don’ts
Problem solving .............................. 18
Standard g
conditions......................................19
Built-in appliances guarantee
terms and conditions....................20
uarantee terms and
16
17
How to obtain service..................21
EN
1 Your refrigerator
Congratulations on your choice of a Beko quality Appliance which has been
designed to give you service for many years.
1
2
3
4
4
5
5
5
4
6
1. Control Panel
2. Lift up flap
3. Drop down flap
4. Standard drawers
5. Extra large drawers
6. Front feet
C *MKYVIWXLEXXEOITPEGIMRXLMWMRWXVYGXMSRQERYEP EVI WGLIQEXMG ERH QE] RSX
GSVVIWTSRHI\EGXP][MXL]SYV TVSHYGX-JXLIWYFNIGX TEVXW EVI RSXMRGPYHIHMR
XLITVSHYGX ]SY LEZI TYVGLEWIH XLIR MXMWZEPMH JSV SXLIVQSHIPW
EN
2 Warnings
• Do not connect your appliance to the
electricity supply until all packing and
transit protectors have been
removed.
• If transported horizontally leave
to stand upright for at least 4
hours before switching on to allow
compressor oil to settle.
• If you are discarding an old
refrigerator with a lock or latch fitted
to the door, disable the lock/latch,
ensure that it is left in a safe condition
to prevent the entrapment of young
children.
• This freezer must only be used for its
intended purpose i.e. the storing and
freezing of edible foodstuff.
• Do not dispose of the appliance
on a fire. At Beko, the care and
protection of our environment is an
ongoing commitment. This appliance
which is among the latest range
introduced is particularly environment
friendly. Your appliance contains non
CFC / HFC natural substances in the
cooling system (called R600a) and in
the insulation (called cyclopentane)
which are potentially flammable if
exposed to fire. Therefore, take care
not to damage, the cooling circuit /
pipes of the appliance in
transportation and in use. In case of
damage do not expose the appliance
to fire or potential ignition source and
immediately ventilate the room where
the appliance is situated.
• We suggest you contact your local
authority for disposal information and
facilities available.
• See 'Installation instructions' on page
8 for information on suitable location.
• To obtain the best possible
performance and trouble free
operation from your appliance it is
very important to carefully read these
instructions.
• On delivery, check to make sure that
the product is not damaged and that
all the parts and accessories are in
perfect condition.
• Ensure that the plug remains readily
accessible. Do not use multiple
adapter or extension cable.
• Failure to observe these instructions
may invalidate your right to free
service during the guarantee period.
• Keep ventilation openings, in the
appliance enclosure or in the built-in
structure, clear of obstruction.
• Do not use mechanical devices
or other means to accelerate the
defrosting process, other than those
recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances
inside the food storage
compartments of the appliance,
unless they are of the type
recommended by the manufacturer.
• We suggest you keep these
instructions in a safe place for easy
reference.
• This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way
and understand the hazards
involved. Children shall not play with
the appliance. Cleaning and user
maintenance shall not be made by
children without supervision.
• Children should be supervised to
ensure that they do not play with the
appliance.
EN
Electrical requirements
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown on the rating plate
inside the appliance corresponds to
your electricity supply. Rating label is on
the left hand side of freezer inner liner.
We recommend that this appliance be
connected to the mains supply via a
suitable switched and fused socket.
The appliance must be positioned so
that the plug is accessible.
WARNING: When positioning the
appliance ensure the supply cord is not
trapped or damaged.
Should the mains lead of the appliance
become damaged or should it need
replacing at any time, it must be
replaced by a special purpose made
mains lead which can only be obtained
from a Beko authorised service agent.
Warning! This appliance
must be earthed
If the fitted moulded plug is not suitable
for your socket, then the plug should
be cut off and an appropriate plug
fitted. Destroy the old plug which is cut
off as a plug with bared cord could
cause a shock hazard if inserted into a
socket elsewhere in the house. The
moulded plug on this appliance
incorporates a 13 A fuse. Should
the fuse need to be replaced an
ASTABEAB approved BS 1362 fuse of
the same rating must be used. Do not
forget to refit the fuse cover. In the
event of losing the fuse cover the plug
must not be used until a replacement
fuse cover has been fitted. Colour of
the replacement fuse cover must be
the same colour as that visible on the
pin face of the plug. Fuse covers are
available from any good electrical store.
Important! Fitting A Different Plug
As the colours of the wires in the mains
lead of this appliance may not
correspond with the coloured markings
identifying the terminals in your plug
proceed as follows (see diagram):
1. Connect the green-yellow or green
(Earth) wire to the terminal in the plug
marked ‘E’ or with the symbol or
coloured green and yellow or green.
2. Connect the blue (Neutral) wire to the
terminal in the plug marked ‘N’ or
coloured black.
3. Connect the brown (Live) wire to the
terminal in the plug marked ‘L’ or
coloured red.
With alternative plugs a 13 A fuse must
be fitted either in the plug or adaptor or
in the main fuse box. If in doubt contact
a qualified electrician
+6))2
=)003;
+6))2
N
&09)
36
&0%'/
36
QQ
L
QQ
&63;2
36
6)(
QQ
QQ
CORD GRIP
QQ
QQ
FUSE
*-88)(;-8,
*-8&76)40%')1)28
&7%*97)%0;%=7
Energy saving tips
1.
Ensure your appliance is installed in a
well ventilated area.
2.
Ensure the time between buying
chilled/frozen food and placing them in
your appliance is kept at minimum,
particularly in summer. We recommend
you use a cool bag or a special carrier
bag to carry perishable food.
3.
Do not leave the door (s) of your
appliance open longer than necessary
and ensure they are closed properly
after each opening.
4.
Energy consumption of this appliance
is measured while freezer compartment
is loaded without use of top shelf lid
and the drawers except the bottom
drawer. It is advised that freezer
compartment is loaded without use of
drawers except the bottom drawer in
order to achieve maximum loading
capacity.
EN
'%686-(+)*97)
3 Installation
Disposing of the packaging
The packing materials may be
dangerous for children. Keep the
packing materials out of the reach
of children or dispose of them by
classifying them in accordance
with the waste instructions. Do not
dispose of them along with the normal
household waste.
The packing of your refrigerator is
produced from recyclable materials.
Disposing of your old
appliance
Dispose of your old refrigerator without
giving any harm to the environment.
• You may consult your authorised
dealer or waste collection center of
your municipality about the disposal of
your refrigerator.
Before disposing of your refrigerator,
cut off the electric plug and, if there are
any locks on the door, make them
inoperable in order to protect children
against any danger.
Placing and Installation
1.
Install your appliance
allows ease of use.
2.
Keep your appliance away from heat
sources, humid places and direct
sunlight.
3.
There must be appropriate air
ventilation around your appliance in
order to achieve an efficient
operation.
4.
Do not operate this appliance unless
installed in furniture (The appliance
should be located on a smooth
surface).
WARNING: Do not locate extension
sockets or charging transformers/
power supplies or Lithium-Iron battery
operated products adjacent to the
compressor as they could overheat.
to a place that
Transportation instructions
1. The appliance should be transported
only in a vertical upright position. The
packing as supplied must be intact during
transportation.
2. If during the course of transport the
appliance has to be transported
horizontally, it must only be laid on its right
hand side when standing in the front of
the appliance. After bringing it to upright
position, it must not be operated for at
least 4 hours to allow the system to settle.
3. Failure to comply with the above
instructions could result in damage
occurring to the appliance. The
manufacturer will not be held responsible
if these instructions are disregarded.
4. The appliance must be protected
against rain, moisture and other
atmospheric influences.
5. When positioning your appliance take
care not to damage your flooring, pipes,
wall coverings etc. Do not move the
appliance by pulling by the door or handle.
6. Empty any water in the drain tray before
moving. See section ‘Defrosting’ and
‘Maintenance and cleaning’ for further
information.
7. Make sure that the defrost water pipe
at the back of the product is fixed to the
plastic evaporating pan on the top of the
compressor, to avoid defrost water
spillage on the floor.
IMPORTANT: Care must be taken while
cleaning / carrying the appliance to avoid
touching the bottom of the condenser
metal wires at the back of the appliance as
you might injure your fingers and hands.
Do not attempt to sit or stand on top of
your appliance as it is not designed for
such use. You could injure yourself or
damage the appliance.
“IMPORTANT: Make sure that mains
cable is not caught under the appliance
during and after carrying / moving the
appliance, to avoid the mains cable
becoming cut or damaged.”
Do not allow children to play with the
appliance or tamper with the controls.
Beko declines to accept any liability
should the instructions not be followed.
EN
Loading...