We hope that your product, which has been produced in modern plants and
checked under the most meticulous quality control procedures, will provide you
an effective service.
Therefore, read this entire user manual carefully before using the product and
keep it as a reference. If you handover the product to someone else, give the user
manual as well.
The user manual will help you use the product in a fast and safe way.
• Read the manual before installing and operating the product.
• Make sure you read the safety instructions.
• Keep the manual in an easily accessible place as you may need it later.
• Read the other documents given with the product.
• Remember that this user manual is also applicable for several other models.
Differences between models will be identified in the manual.
Explanation of symbols
Throughout this user manual the following symbols are used:
C Important information or useful tips.
A Warning against dangerous conditions for life and property.
B Warning against electric voltage.
WARNING!
In order to ensure a normal operation of your refrigerating appliance, which uses
a completely environmentally friendly refrigerant the R600a (flammable only
under certain conditions) you must observe the following rules:
•
Do not hinder the free circulation of the air around the appliance.
•
Do not use mechanical devices in order to accelerate the defrosting,
others than the ones recommended by the manufacturer.
•
Do not destroy the refrigerating circuit.
•
Do not use electric appliances inside the food keeping compartment, other
than those that might have been recommended by the manufacturer.
Recycling
This product is supplied with the selective sorting symbol for waste electrical
and electronic equipment (WEEE).
This means that this product must be handled pursuant to European
Directive 2002/96/EC in order to be recycled or dismantled to minimise its
impact on the environment. For further information, please contact your local
or regional authorities.
Electronic products not included in the selective sorting process are
potentially dangerous for the environment and human health due to the
presence of hazardous substances.
CONTENTS
1 Your refrigerator 3
2 Important Safety
Warnings
Intended use .....................................4
General safety ...................................4
Figures that take place in this instruction manual are schematic and may not
C
9. Ice bank
10. Compartment for quickly freezing
11. Freezer compartment drawers
12. Adjustable door shelves
13. Bottle shelf
14. Freezer fan
15. Fridge compartment
16. Freezer compartment
correspond exactly with your product. If the subject parts are not included in
the product you have purchased, then it is valid for other models.
EN
3
2 Important Safety Warnings
Please review the following information.
Failure to observe this information may
cause injuries or material damage.
Otherwise, all warranty and reliability
commitments will become invalid.
Original Spare parts will be provided
for 10 years, following the product
purchasing date.
Intended use
This product is intended to be used:
•
indoors and in closed areas such as
homes;
•
in closed working environments such
as stores and offices;
•
in closed accommodation areas such
as farm houses, hotels, pensions.
•
It should not be used outdoors.
General safety
• When you want to dispose/scrap
the product, we recommend you to
consult the authorized service in
order to learn the required
information and authorized bodies.
• Consult your authorized service for
all your questions and problems
related to the refrigerator. Do not
intervene or let someone intervene to
the refrigerator without notifying the
authorised services.
• For products with a freezer
compartment; Do not eat cone ice
cream and ice cubes immediately
after you take them out of the freezer
compartment! (This may cause
frostbite in your mouth.)
•
For products with a freezer
compartment; Do not put bottled and
canned liquid beverages in the
freezer compartment. Otherwise,
these may burst.
• Do not touch frozen food by hand;
they may stick to your hand.
• Unplug your refrigerator before
cleaning or defrosting.
• Vapor and vaporized cleaning
materials should never be used in
cleaning and defrosting processes of
your refrigerator. In such cases, the
vapor may get in contact with the
electrical parts and cause short circuit
or electric shock.
• Never use the parts on your
refrigerator such as the door as a
means of support or step.
• Do not use electrical devices inside
the refrigerator.
• Do not damage the parts, where
the refrigerant is circulating, with
drilling or cutting tools. The refrigerant
that might blow out when the gas
channels of the evaporator, pipe
extensions or surface coatings are
punctured causes skin irritations and
eye injuries.
• Do not cover or block the ventilation
holes on your refrigerator with any
material.
• Electrical devices must be repaired
by only authorised persons. Repairs
performed by incompetent persons
create a risk for the user.
• In case of any failure or during
a maintenance or repair work,
disconnect your refrigerator’s mains
supply by either turning off the
relevant fuse or unplugging your
appliance.
• Do not pull by the cable when pulling
off the plug.
• Place the beverage with higher proofs
tightly closed and vertically.
4
EN
• Never store spray cans containing
flammable and explosive substances
in the refrigerator.
• Do not use mechanical devices
or other means to accelerate the
defrosting process, other than those
recommended by the manufacturer.
• This product is not intended to be
used by persons with physical,
sensory or mental disorders or
unlearned or inexperienced people
(including children) unless they are
attended by a person who will be
responsible for their safety or who will
instruct them accordingly for use of
the product.
• Do not operate a damaged
refrigerator. Consult with the service
agent if you have any concerns.
• Electrical safety of your refrigerator
shall be guaranteed only if the earth
system in your house complies with
standards.
• Exposing the product to rain, snow,
sun and wind is dangerous with
respect to electrical safety.
• Contact authorized service when
there is a power cable damage to
avoid danger.
• Never plug the refrigerator into
the wall outlet during installation.
Otherwise, risk of death or serious
injury may arise.
• This refrigerator is intended for only
storing food items. It must not be
used for any other purpose.
• Label of technical specifications is
located on the left wall inside the
refrigerator.
• Never connect your refrigerator to
electricity-saving systems; they may
damage the refrigerator.
• If there is a blue light on the
refrigerator, do not look at the
blue light with optical tools.
• For manually controlled refrigerators,
wait for at least 5 minutes to start the
refrigerator after power failure.
• This operation manual should be
handed in to the new owner of the
product when it is given to others.
• Avoid causing damage on power
cable when transporting the
refrigerator. Bending cable may
cause fire. Never place heavy
objects on power cable.
• Do not touch the plug with wet
hands when plugging the product.
• Do not plug the refrigerator if the
wall outlet is loose.
• Water should not be sprayed on
inner or outer parts of the product
for safety purposes.
• Do not spray substances containing
inflammable gases such as propane
gas near the refrigerator to avoid fire
and explosion risk.
• Never place containers filled with
water on top of the refrigerator; in
the event of spillages, this may
cause electric shock or fire.
• Do not overload the refrigerator with
food. If overloaded, the food items
may fall down and hurt you and
damage refrigerator when you open
the door.
• Never place objects on top of the
refrigerator; otherwise, these
objects may fall down when you
open or close the refrigerator's
door.
• As they require a precise
temperature, vaccines, heatsensitive medicine and scientific
materials and etc. should not be
kept in the refrigerator.
5
EN
• If not to be used for a long time,
refrigerator should be unplugged.
A possible problem in power cable
may cause fire.
• The plug's tip should be cleaned
regularly with a dry cloth; otherwise,
it may cause fire.
• Refrigerator may move if adjustable
legs are not properly secured on the
floor. Properly securing adjustable
legs on the floor can prevent the
refrigerator to move.
• When carrying the refrigerator, do
not hold it from door handle.
Otherwise, it may be snapped.
• When you have to place your
product next to another refrigerator
or freezer, the distance between
devices should be at least 8 cm.
Otherwise, adjacent side walls may
be humidified.
For products with a water
dispenser
Pressure of water mains should be
minimum 1 bar. Pressure of water
mains should be maximum 8 bars.
• Use only potable water.
Child safety
• If the door has a lock, the key should
be kept away from reach of children.
• Children must be supervised to
prevent them from tampering with
the product.
HCA warning
If your product's cooling system
contains R600a:
This gas is flammable. Therefore, pay
attention to not damaging the cooling
system and piping during usage and
transportation. In the event of damage,
keep your product away from potential
fire sources that can cause the product
catch a fire and ventilate the room in
which the unit is placed.
Ignore this warning if your
product's cooling system contains
R134a.
Type of gas used in the product is
stated in the type label which is on the
left wall inside the refrigerator.
Never throw the product in fire for
disposal.
Things to be done for energy
saving
• Do not leave the doors of your
refrigerator open for a long time.
• Do not put hot food or drinks in your
refrigerator.
• Do not overload your refrigerator so
that the air circulation inside of it is
not prevented.
• Do not install your refrigerator under
direct sunlight or near heat emitting
appliances such as ovens,
dishwashers or radiators. Keep your
refrigerator at least 30 cm away from
heat emitting sources and at least
5 cm from electrical ovens.
• Pay attention to keep your food in
closed containers.
• For products with a freezer
compartment; You can store
maximum amount of food items in
the freezer when you remove the
shelf or drawer of the freezer. Energy
consumption value stated for your
refrigerator has been determined
by removing freezer shelf or drawer
and under maximum load. There
is no harm to use a shelf or drawer
according to the shapes and size of
food to be frozen.
• Thawing frozen food in fridge
compartment will both provide
energy saving and preserve the food
quality.
6
EN
3Installation
B In case the information which are
given in the user manual are not
taken into account, manufacturer will
not assume any liability for this.
Points to be paid attention
to when the relocation of the
refrigerator
1. Your refrigerator should be
unplugged. Before transportation of
your refrigerator, it should be
emptied and cleaned.
2. Before it is re-packaged, shelves,
accessories, crisper, etc. inside your
refrigerator should be fixed with
adhesive tape and secured against
impacts. Package should be bound
with a thick tape or sound ropes
and the transportation rules on the
package should be strictly
observed.
3. Original packaging and foam
materials should be kept for future
transportations or moving.
Before you start the
refrigerator
Check the following before you start to
use your refrigerator:
1. Is the interior of the refrigerator dry
and can the air circulate freely in the
rear of it?
2. Clean the interior of the refrigerator
as recommended in the
“Maintenance and cleaning” section.
3. Connect the plug of the refrigerator
to the wall socket. When the fridge
door is opened, fridge internal lamp
will turn on.
4. When the compressor starts to
operate, a sound will be heard. The
liquid and gases sealed within the
refrigeration system may also give rise
to noise, even if the compressor is
not running and this is quite normal.
5. Front edges of the refrigerator may
feel warm. This is normal. These
areas are designed to be warm to
avoid condensation.
Electrical connection
Connect your product to a grounded
socket which is being protected by a
fuse with the appropriate capacity.
Important:
The connection must be in compliance
with national regulations.
• The power plug must be easily
accessible after installation.
• Electrical safety of your refrigerator
shall be guaranteed only if the earth
system in your house complies with
standards.
• The voltage stated on the label
located at left inner side of your
product should be equal to your
network voltage.
• Extension cables and multi plugs
must not be used for connection.
B A damaged power cable must be
replaced by a qualified electrician.
B Product must not be operated before
it is repaired! There is the risk of
electric shock!
7
EN
Disposing of the packaging
The packing materials may be
dangerous for children. Keep the
packing materials out of the reach
of children or dispose of them by
classifying them in accordance with
the waste instructions stated by your
local authorities. Do not throw away
with regular house waste, throw away
on packaging pick up spots
designated by the local authorities.
The packing of your refrigerator is
produced from recyclable materials.
Disposing of your old
refrigerator
Dispose of your old refrigerator without
giving any harm to the environment.
• You may consult your authorized
dealer or waste collection center of
your municipality about the disposal
of your refrigerator.
Before disposing of your refrigerator,
cut out the electric plug and, if there
are any locks on the door, make them
inoperable in order to protect children
against any danger.
Placing and Installation
A If the entrance door of the room
where the refrigerator will be installed is
not wide enough for the refrigerator to
pass through, then call the authorized
service to have them remove the
doors of your refrigerator and pass it
sideways through the door.
1. Install your refrigerator to a place
that allows ease of use.
2. Keep your refrigerator away from
heat sources, humid places and
direct sunlight.
3. There must be appropriate air
ventilation around your refrigerator in
order to achieve an efficient
operation. If the refrigerator is to be
placed in a recess in the wall, there
must be at least 5 cm distance with
the ceiling and at least 5 cm with the
wall. Do not place your product on
the materials such as rug or carpet.
4. Place your refrigerator on an even
floor surface to prevent jolts.
5. Do not keep your refrigerator in
ambient temperatures under 10°C.
Replacing the interior lamp
To change the Bulb/LED used for
illumination of your refrigerator,
call your Authorised Service.
The lamp(s) used in this appliance is
not suitable for household room
illumination. The intended purpose of
this lamp is to assist the user to place
foodstuffs in the refrigerator/freezer in a
safe and comfortable way. The lamps
used in this appliance have to
withstand extreme physical conditions
such as temperatures below -20°C.
8
EN
Reversing the doors
Proceed in numerical order.
7
8
9
10
18
1
2
3
4
5
6
19
17
16
13
11
20
14
12
15
EN
9
4 Preparation
•
Your refrigerator should be installed at
least 30 cm away from heat sources
such as hobs, ovens, central heater
and stoves and at least 5 cm away
from electrical ovens and should not
be located under direct sunlight.
•
The ambient temperature of the room
where you install your refrigerator
should at least be 10°C. Operating
your refrigerator under cooler
conditions is not recommended with
regard to its efficiency.
•
Please make sure that the interior of
your refrigerator is cleaned thoroughly.
•
If two refrigerators are to be installed
side by side, there should be at least
2 cm distance between them.
•
When you operate your refrigerator for
the f irst time, please observe the
following instructions during the initial
six hours.
•
The door should not be opened
frequently.
•
It must be operated empty without
any food in it.
•
Do not unplug your refrigerator. If
a power failure occurs out of your
control, please see the warnings in
the “Troubleshooting” section.
•
Original packaging and foam
materials should be kept for future
transportations or moving.
10
EN
5 Using your refrigerator
Control Panel
2
1
3
5
4
6
8
1. On / Off Indicator
Press the On / Off button for 3 seconds to
turn off or turn on the fridge. When the
fridge is off, the symbol ( ) is lit. All the other
symbols are turned off.
2.Quick fridge function button
The button ( ) has two functions. To activate
or deactivate the Quick Cool function, press it
briefly. Quick Cool indicator will turn off and
the product return to its normal settings.
Use the Q uick Cooling function when
you want to quickly cool the food placed
in the fridge compartment. If you want
to cool large amounts of fresh food,
activate this function before putting the
food into the product.
If you do not cancel it, Quick Cooling will
cancel itself automatically after 1 hour at
the most, or when the fridge compartment
reaches the required temperature. This
function is not recalled when power
restores after a power failure.
3. Fridge compartment temperature
setting button
Press this button ( ) to set the temperature
of the fridge compartment to 8, 7, 6, 5, 4, 3, 2,
8... respective ly. Press this button to set the
fridge compartment temperature to the
desire d value.
4. Freezer compartment temperature
setting button
Press this button ( ) to set the temperature
of the freezer compartment to -18, -19, -20,
-21, -22, -23, -24, -18... respectively. Press
this button to set the freezer compartment
temperature to the desired value.
5. Quick freeze function button
Press this button ( ) to activate or
deactivate the Quick freeze function. When
you activate the function, the freezer
compartment will be cooled to a temperature
lower than the set value.
7
Use the Quick Freeze function when
you want to quickly freeze the food
placed in freezercompartment. If you
want to freeze large amounts of fresh
food, activate this function before
putting the food into the product.
If you do not cancel it, Quick Freeze will
cancel itself automatically after 25 hours
at the most or when the freezer
compartment reaches the required
temperature. This function is not recalled
when power restores after a power failure.
6. Alarm off warning
In case of power failure / high temperature
alarm, after checking the food located in the
freezer compartment press the alarm off
button ( ) to clear the warning.
7. Eco fuzzy
Press and hold the eco fuzzy button ( ) for
3 seconds to activate the Eco fuzzy function.
The refrigerator will start to operate in the
most economic mode at least 6 hours later and
the economic usage indicator will be on ( ).
Press and hold the eco fuzzy function button
for 3 seconds to disable the eco fuzzy
function. This indicator will be on after 6
hours when eco fuzzy is activated, provided
the doors are not opened.
ECO indicator will be active if the freezer
compartment temperature is set to -18°C.
8. Vacation Function
In order to activate Vacation function, press
this button ( ) for 3 seconds, and the
vacation mode indicator ( ) will be
activated. When the vacation function is
activated, “- -” is displayed on the fridge
compartment temperature indicator and no
active cooling is performed in the fridge
compartment. It is not suitable to keep the
food in the fridge compartment in this
function. Other compartments will continue
to be cooled according to their set
temperatures. To cancel this function press
Vacation function button again.
11
EN
Dual cooling system
Your refrigerator is equipped with two
separate cooling systems to cool the
fresh food compartment and freezer
compartment. Thus, air in the fresh food
compartment and freezer compartment
do not get mixed. Thanks to these two
separate cooling systems, cooling speed
is much higher than other refrigerators.
Odors in the compartments do not get
mixed. Also additional power saving is
provided since the defrosting is
performed individually.
Defrost
A) Fridge compartment
Fridge compartment performs fullautomatic defrosting.
The defrost water runs to the drain tube
via a collection container at the back of
the appliance. Check that the tube is
permanently placed with its end
collecting tray on the compressor to
prevent the water spilling on the electric
installation or on the floor.
B) Freezer compartment
The NO FROST type defrost is
completely automatic. No intervention
from your side is required. The water is
collected on the compressor tray. Due
the heat of the compressor the water is
evaporated.
Warnings!
The fans inside the freezer and fresh food
compartments circulates cold air. Never
insert any object through the guard.
Do not allow children to play with the
fresh food and freezer fan.
Never store products that contain
inflammable propellant gas (e.g.
dispensers, spray cans etc.) or explosive
substances.
Don’t cover the shelves with any
protective materials, which may obstruct
air circulation.
Do not allow children to play with the
appliance or tamper with the controls. Do
not obstruct the fan guards to ensure
that you obtain the best possible
performance from your appliance.
in the
Please ensure the fans are not blocked
(stopped) or impaired by food or
packaging. Blocking (stopping) or
impairing the fan can result in an
increase of the internal freezer
temperature (Thawing).
Zero temperature
compartment
This compartment has been designed
to store frozen food which would be
thawed slowly (meat, fish, chicken, etc.)
as required. Zero temperature
compartment is the coldest place of
your refrigerator in which dairy products
(cheese, butter), meat, fish or chicken
may be kept at ideal storage conditions.
Vegetables and/or fruits must not be
placed in this compartment.
12
EN
6 Maintenance and cleaning
A Never use gasoline, benzene or
similar substances for cleaning
purposes.
B We recommend that you unplug the
appliance before cleaning.
B Never use any sharp abrasive
instrument, soap, household
cleaner, detergent and wax polish for
cleaning.
C Use lukewarm water to clean the
cabinet of your refrigerator and wipe it
dry.
C Use a damp cloth wrung out in
a solution of one teaspoon of
bicarbonate of soda to one pint of
water to clean the interior and wipe it
dry.
B Make sure that no water enters the
lamp housing and other electrical
items.
B If your refrigerator is not going to be
used for a long period of time, unplug
the power cable, remove all food,
clean it and leave the door ajar.
C Check door seals regularly to ensure
they are clean and free from food
particles.
A To remove door racks, remove all the
contents and then simply push the
door rack upwards from the base.
ANever use cleaning agents or water
that contain chlorine to clean the
outer surfaces and chromium coated
parts of the product. Chlorine causes
corrosion on such metal surfaces.
Protection of plastic
surfaces
Do not put the liquid oils or oil-cooked
C
meals in your refrigerator in unsealed
containers as they damage the
plastic surfaces of your refrigerator. In
case of spilling or smearing oil on the
plastic surfaces, clean and rinse the
relevant part of the surface at once
with warm water.
13
EN
7 Troubleshooting
Please review this list before calling the service. It will save your time and
money. This list includes frequent complaints that are not arising from defective
workmanship or material usage. Some of the features described here may not
exist in your product.
The refrigerator does not operate.
• The plug is not inserted into the socket correctly. >>>Insert the plug into the
socket securely.
• The fuse of the socket which your refrigerator is connected to or the main fuse
have blown out. >>>Check the fuse.
Condensation on the side wall of the fridge compartment (MULTIZONE, COOL
CONTROL and FLEXI ZONE).
• Ambient is very c
temperature falls below 10°C.
• Door has been opened frequently. >>>Do not open and close the door of
refrigerator frequently.
• Ambient is very humid. >>>Do not install your refrigerator into highly humid
places.
• Food containing liquid is stored in open containers. >>>Do not store food
with liquid content in open containers.
• Do
or of the refrigerator is left ajar. >>>Close the door of the refrigerator.
• Thermostat is set to a very cold level. >>>Set the thermostat to a suitable level.
Compressor is not running.
• Protective thermic of the compressor will blow out during sudden power
failures or plug-out plug-ins as the refrigerant pressure in the cooling system
of the refrigerator has not been balanced yet. The refrigerator will start running
approximately after 6 minutes. Please call the service if the refrigerator does not
startup at the end of this period.
• The fridge is in defrost cycle. >>>This is normal for a full-automatically defrosting
refrigerator. Defrosting cycle occurs periodically.
• The refrigerator is not plugged into the socket. >>>Make sure that the plug is ft
into the socket.
• Temperature settings are not made correctly. >>>Select the suitable temperature
value.
• There is a power outage. >>>Refrigerator returns to normal operation when the
power restores.
old. >>>Do not install the refrigerator in places where the
14
EN
The operation noise increases when the refrigerator is running.
• The operating performance of the refrigerator may change due to the changes in
the ambient temperature. It is normal and not a fault.
The refrigerator is running frequently or for a long time.
• New product may be wider than the previous one. Larger refrigerators operate
for a longer period of time.
• The room temperature may be high. >>>It is normal that the product operates
for longer periods in hot ambient.
• The refrigerator might be plugged in recently or might be loaded with food.
>>>When the refrigerator is plugged in or loaded with food recently, it will take
longer for it to attain the set temperature. This is normal.
• Large amounts of hot food might be put in the refrigerator recently. >>>Do not
put hot food into the refrigerator.
• Doors might be opened frequently or left ajar for a long time. >>>The warm air
that has entered into the refrigerator causes the refrigerator to run for longer
periods. Do not open the doors frequently.
• Freezer or fridge compartment door might be left ajar. >>>Check if the doors are
closed completely.
• The refrigerator is adjusted to a very low temperature. >>>Adjust the refrigerator
temperature to a warmer degree and wait until the temperature is achieved.
• Door seal of the fridge or freezer may be soiled, worn out, broken or not
properly seated. >>>Clean or replace the seal. Damaged/broken seal causes
the refrigerator to run for a longer period of time in order to maintain the current
temperature.
Freezer temperature is very low while the fridge temperature is sufficient.
• The freezer temperature is adjusted to a very low value. >>>Adjust the freezer
temperature to a warmer degree and check.
Fridge temperature is very low while the freezer temperature is sufficient.
• The fridge temperature is adjusted to a very low value. >>>Adjust the fridge
temperature to a warmer degree and check.
Food kept in the fridge compartment drawers is frozen.
• The fridge temperature is adjusted to a very high value. >>>Adjust the fridge
temperature to a lower value and check.
15
EN
Temperature in the fridge or freezer is very high.
• The fridge temperature is adjusted to a very high value. >>>Fridge compartment temperature
setting has an effect on the temperature of the freezer. Change the temperatures of the fridge
or freezer and wait until the relevant compartments
attain a sufficient temperature.
• Doors are opened frequently or left ajar for a long time. >>>Do not open the
doors frequently.
• Door is ajar. >>>Close the door completely.
• The refrigerator is plugged in or loaded with food recently. >>>This is normal. When the
refrigerator is plugged in or loaded with food recently, it will take longer for it to attain the set
temperature.
• Large amounts of hot food might be put in the refrigerator recently. >>>Do not put hot food into
the refrigerator.
Vibrations or noise.
• The floor is not level or stable. >>> If the refrigerator rocks when moved slowly, balance it
by adjusting its feet. Also make sure that the floor is strong enough to carry the refrigerator,
and level.
• The items put onto the refrigerator may cause noise. >>>Remove the items on top of the
refrigerator.
There are noises coming from the refrigerator like liquid flowing, spraying, etc.
• Liquid and gas flows occur in accordance with the operating principles of your refrigerator. It
is normal and not a fault.
Whistle comes from the refrigerator.
• Fans are used in order to cool the refrigerator. It is normal and not a fault.
Condensation on the inner walls of refrigerator.
• Hot and humid weather increases icing and condensation. It is normal and not a
fault.
• Doors are opened frequently or left ajar for a long time. >>>Do not open the doors frequently.
Close them if they are open.
• Door is ajar. >>>Close the door completely.
Humidity occurs on the outside of the refrigerator or between the doors.
• There might be humidity in the air; this is quite normal in humid weather. When the humidity is
less, condensation will disappear.
Bad odour inside the refrigerator.
• No regular cleaning is performed. >>>Clean the inside of the refrigerator regularly with a sponge,
lukewarm water or carbonate dissolved in water.
• Some containers or package materials may cause the smell. >>>Use a different container or
different brand packaging material.
• Food is put into the refrigerator in uncovered containers. >>>Keep the food in closed containers.
Microorganisms spreading out from uncovered containers
can cause unpleasant odours.
• Remove the foods that have expired best before dates and spoiled from the
refrigerator.
The door is not closing.
• Food packages are preventing the door from closing. >>>Replace the packages that are
obstructing the door.
• The refrigerator is not completely even on the floor. >>>Adjust the feet to balance the
refrigerator.
• The floor is not level or strong. >>>Make sure that the floor is le el and capable to carry the
refrigerator.
Crispers are stuck.
• The food is touching the ceiling of the drawer. >>>Rearrange food in the drawer.
16
EN
Leggere innanzitutto il manuale di istruzioni.
Gentile Cliente,
ci auguriamo che l'articolo da Lei scelto, prodotto in moderni stabilimenti e
sottoposto ai più severi controlli di qualità, risponda interamente alle Sue esigenze.
A tal fine, La invitiamo a leggere attentamente il manuale di istruzioni del prodotto
prima di procedere al suo utilizzo e di conservarlo per eventuali consultazioni
future.
Il presente manuale
• Aiuterà l'utente ad utilizzare l'apparecchio in modo rapido e sicuro.
• Leggere le istruzioni per l'uso prima di installare e utilizzare il prodotto.
• Seguire attentamente le istruzioni, in particolare quelle inerenti alla sicurezza.
• Conservare il presente manuale in un luogo facilmente accessibile per eventuali
future consultazioni.
• Leggere inoltre gli altri documenti forniti assieme al prodotto.
Il presente manuale può essere valido anche per altri modelli.
Simboli e loro descrizione
Il manuale di istruzioni contiene i seguenti simboli:
C Informazioni importanti o consigli utili di utilizzo.
A Segnale di avvertimento in caso di situazioni pericolose per la persona o i beni.
B Avvertimento in caso di problemi con il voltaggio.
AVVERTENZA!
Per garantire il funzionamento adeguato dell'elettrodomestico, che utilizza il
refrigerante R600a completamente adatto all'ambiente (infiammabile solo in
determinate condizioni), è necessario attenersi alle seguenti regole:
• Non ostacolare la libera circolazione dell'aria attorno all'elettrodomestico.
• Per accelerare lo sbrinamento non utilizzare dispositivi meccanici diversi da
quelli consigliati dal produttore.
• Non danneggiare il circuito refrigerante.
• Non utilizzare all'interno del comparto del cibo elettrodomestici diversi da
quelli consigliati dal produttore.
Questo prodotto riporta il simbolo di raccolta differenziata per le
Riciclaggio
apparecchiature elettriche ed elettroniche di rifiuto (WEEE).
Ciò significa che il prodotto deve essere gestito in conformità alla direttiva
europea 2002/96/EC in modo che durante il riciclaggio e lo smontaggio sia
ridotto al minimo l’impatto sull’ambiente. Per ulteriori informazioni contattare
le autorità locali o regionali.
I prodotti elettronici non inclusi nel processo di raccota differenziata sono
potenzialmente pericolosi per l’ambiente e la salute umana a causa della
presenza di sostanze pericolose.
INDICE
1 Il frigorifero 3
2 Importanti avvertenze per
la sicurezza 4
Uso previsto ...................................... 4
Sicurezza generale ............................4
Sicurezza bambini .............................6
Avvertenza HCA ................................6
Cose da fare per risparmiare energia....6
3Installazione
Punti a cui prestare attenzione quando
si sposta il frigorifero ..........................7
CLe illustrazioni contenute in questa guida sono schematiche e potrebbero non
corrispondere esattamente al prodotto in uso. Se le parti in oggetto non sono incluse
nel prodotto acquistato, significa che sono da intendersi per altri modelli.
2 Importanti avvertenze per la sicurezza
Prendere in esame le seguenti
informazioni. La mancata osservanza
di queste informazioni può provocare
lesioni o danni materiali. Quindi tutte le
garanzie e gli impegni sull’affidabilità
diventerebbero privi di validità.
I pezzi di ricambio originali verranno
forniti per 10 anni, successivamente
alla data di acquisto del prodotto.
Uso previsto
Questo apparecchio è destinato
ad essere usato:
• all'interno e in aree chiuse, ad
esempio in casa;
• in ambienti di lavoro chiusi, come
negozi e uffici;
• in strutture chiuse di soggiorno,
come agriturismi, alberghi, pensioni.
• Non deve essere usato all’esterno.
Sicurezza generale
•
Quando si vuole smaltire/eliminare
l'apparecchio, è consigliabile
consultare il servizio autorizzato per
apprendere le informazioni necessarie
e conoscere gli enti autorizzati.
• Consultare il servizio di
manutenzione autorizzato per tutti i
problemi relativi al frigorifero. Non
intervenire o far intervenire sul
frigorifero senza informare il servizio
manutenzione autorizzato.
• Per apparecchi dotati di scomparto
freezer; non mangiare coni gelato o
cubetti di ghiaccio o gelati appena
estratti dal freezer! (Ciò potrebbe
causare sintomi di congelamento in
bocca).
• Per apparecchi dotati di scomparto
freezer; non mettere bottiglie e
lattine di bibite liquide nello
scomparto del freezer altrimenti
potrebbero esplodere.
• Non toccare con le mani gli alimenti
gelati; possono incollarsi ad esse.
• Scollegare il frigorifero prima della
pulizia o dello sbrinamento.
• Il vapore e i materiali per la pulizia
vaporizzati non devono mai essere
usati per pulire e scongelare il
frigorifero. In queste situazioni, il
vapore può entrare in contatto con
le parti elettriche e provocare corto
circuito o scossa elettrica.
• Non usare mai parti del frigorifero
come lo sportello come mezzo di
supporto o movimento.
• Non utilizzare dispositivi elettrici
all’interno del frigorifero.
•
Non danneggiare le parti, in cui
circola il refrigerante, con utensili
perforanti o taglienti. Il refrigerante
può scoppiare quando i canali del
gas dell’evaporatore, le estensioni
dei tubi o le pellicole superficiali
vengono punti e provocano irritazioni
alla pelle e lesioni agli occhi.
• Non bloccare o coprire la
ventilazione dell’elettrodomestico.
• I dispositivi elettrici devono essere
riparati solo da persone
autorizzate. Le riparazioni eseguite
da personale non competente
provocano danni all’utilizzatore.
• In caso di guasto o durante lavori
di riparazione e manutenzione,
scollegare la fornitura d'energia
principale spegnendo il fusibile
principale o scollegando la presa
dell’apparecchio.
• Non tirare dal cavo quando si
estrae la spina.
• Posizionare le bibite più alte molto
vicine e in verticale.
• Non conservare mai nel frigorifero
contenitori spray che contengano
sostanze infiammabili ed esplosive.
IT
4
• Non utilizzare apparecchiature
meccaniche o altri mezzi diversi da
quelli consigliati dal produttore per
accelerare il processo di sbrinamento.
• Questo apparecchio non deve essere
usato da persone con disturbi fisici,
sensoriali o mentali o persone non
preparate o senza esperienza
(compresi bambini) a meno che non
ricevano la supervisione da parte di
una persona responsabile della loro
sicurezza che li istruirà sull'uso
corretto dell'apparecchio.
• Non utilizzare frigoriferi danneggiati.
Consultare l'agente per l'assistenza in
caso di dubbi.
• La sicurezza elettrica del frigorifero è
garantita unicamente se il sistema di
messa a terra dell’apparecchiatura è
conforme agli standard.
• L’esposizione dell'apparecchio
a pioggia, neve, sole e vento è
pericolosa per la sicurezza elettrica.
• Contattare l’assistenza autorizzata
quando ci sono danni ai cavi in modo
da evitare pericoli.
• Non collegare mai il frigorifero alla
presa a muro durante l’installazione,
per evitare il rischio di morte o lesioni
gravi.
• Questo frigorifero è destinato solo alla
conservazione di alimenti. Non deve
essere usato per altri scopi.
• L'etichetta con le specifiche tecniche
si trova sulla parete sinistra nella parte
interna del frigorifero.
•
Non collegare mai il frigorifero a
sistemi di risparmio energetico;
potrebbero danneggiare il frigorifero.
•
Se c'è una luce blu sul frigorifero,
non guardare la luce con strumenti
ottici.
• Per i frigoriferi con controllo manuale,
attendere almeno 5 minuti per avviare
il frigorifero dopo un'assenza di
elettricità.
• Questo manuale operativo deve
essere dato al nuovo proprietario
dell'apparecchio quando il prodotto
stesso viene dato ad altri.
• Evitare di provocare danni al cavo di
alimentazione quando si trasporta il
frigorifero. Piegare il cavo può
provocare un incendio. Non mettere
mai oggetti pesanti sul cavo di
alimentazione.
•
Non toccare la spina con le
mani bagnate quando si collega
l'apparecchio alla rete elettrica.
•
Non collegare il frigorifero alla rete se
la presa elettrica è allentata.
•
Non deve essere spruzzata acqua
sulle parti interne o esterne
dell'apparecchio per motivi di
sicurezza.
•
Non spruzzare sostanze contenenti
gas infiammabili come gas propano
vicino al frigorifero per evitare rischio
di incendio ed esplosione.
•
Non mettere mai contenitori pieni di
acqua sopra al frigorifero; in caso di
schizzi, questo potrebbe provocare
shock elettrico o incendio.
•
Non sovraccaricare il frigorifero di
alimenti. In caso di sovraccarico, gli
alimenti potrebbero cadere
provocando lesioni alla persona e
danni al frigorifero quando si apre lo
sportello.
•
Non mettere mai oggetti sopra al
frigorifero; altrimenti questi oggetti
potrebbero cadere quando si apre o
si chiude lo sportello del frigorifero.
•
Poiché necessitano di un controllo
preciso della temperatura, vaccini,
medicine sensibili al calore e
materiali scientifici non devono
essere conservati nel frigorifero.
5
IT
• Se non sarà usato per un lungo
periodo, il frigorifero deve essere
scollegato. Un problema possibile nel
cavo di alimentazione può provocare
un incendio.
•
La punta della spina deve essere pulita
regolarmente con un panno asciutto;
altrimenti può provocare un incendio.
• Il frigorifero potrebbe spostarsi se i
piedini regolabili non sono assicurati
correttamente al pavimento.
Assicurare correttamente i piedini al
pavimento può evitare che il
frigorifero si sposti.
• Quando si trasporta il frigorifero, non
tenerlo dalla maniglia dello sportello.
Altrimenti si stacca.
• Quando è necessari posizionare
l'apparecchio vicino ad un altro
frigorifero o freezer, la distanza tra i
dispositivi deve essere di almeno
8 cm. Altrimenti le pareti laterali vicine
potrebbero produrre condensa.
Sicurezza bambini
• Se lo sportello ha un lucchetto, la
chiave deve essere tenuta lontana
dalla portata dei bambini.
• I bambini devono ricevere
supervisione per evitare che
interferiscano con l'apparecchio.
Avvertenza HCA
Se il sistema di raffreddamento
dell'apparecchio contiene R600a:
Questo gas è infiammabile. Pertanto,
fare attenzione a non danneggiare
il sistema di raffreddamento e le
tubazioni durante l’uso e il trasporto. In
caso di danni, tenere l'apparecchio
lontano da potenziali fonti di incendio
che possono provocarne l’incendio e
ventilare la stanza in cui si trova l'unità.
Ignorare questa avvertenza se
il sistema di raffreddamento
dell'apparecchio contiene R134a.
Il tipo di gas usato nell'apparecchio è
descritto nell'etichetta con il tipo sulla
parete sinistra nella parte interna del
frigorifero. Non gettare mai l'apparecchio
nel fuoco per lo smaltimento.
Cose da fare per risparmiare
energia
• Non lasciare lo sportello del
frigorifero aperto per lungo tempo.
• Non inserire alimenti caldi o bevande
calde nell'elettrodomestico.
• Non sovraccaricare il frigorifero
impedendo la circolazione dell’aria al
suo interno.
• Non installare il frigorifero sotto la
luce diretta del
di forni, lavastoviglie o radiatori.
Tenere il frigorifero ad almeno 30 cm
dalle fonti che emettono calore e ad
almeno 5 cm dai forni elettrici.
• Porre attenzione nel conservare gli
alimenti in contenitori chiusi.
• Per apparecchi dotati di scomparto
freezer; è possibile conservare la
quantità massima di alimenti nel
freezer quando si rimuove il ripiano
o il cassetto del freezer. Il valore
di consumo energetico dichiarato
per il frigorifero è stato determinato
rimuovendo il ripiano del freezer o
il cassetto e in condizione di carico
massimo. Non c'è pericolo
nell'usare un ripiano o un cassetto
secondo le forme e le dimensioni
degli alimenti da congelare.
• Scongelare alimenti congelati nello
scomparto frigo garantisce
risparmio energetico e conserva la
qualità degli alimenti.
sole o nelle vicinanze
6
IT
3 Installazione
B Se le informazioni date in questo
manuale utente non sono prese in
considerazione, il produttore non
accetta alcuna responsabilità per
questo.
Punti a cui prestare
attenzione quando si sposta
il frigorifero
1. Il frigorifero deve essere scollegato.
Prima del trasporto, il frigorifero deve
essere svuotato e pulito.
2. Prima di imballarlo di nuovo, ripiani,
accessori, scomparto frutta e
verdura, ecc. all'interno del frigorifero
devono essere fissati con nastro
adesivo e assicurati contro i colpi.
L'imballaggio deve essere eseguito
con un nastro doppio o cavi sicuri e
bisogna osservare rigorosamente le
norme per il trasporto presenti sulla
confezione.
3. Conservare i materiali originali di
imballaggio per futuri trasporti o
spostamenti.
Prima di avviare il frigorifero
Controllare quanto segue prima di
utilizzare il frigorifero:
1. L’interno del frigorifero è asciutto e
l’aria può circolare liberamente sul
retro?
2. Pulire la parte interna del frigorifero
come consigliato nella sezione
"Manutenzione e pulizia".
3. Collegare la spina del frigorifero alla
presa elettrica. Quando lo sportello
del frigorifero è aperto, la lampadina
interna si accende.
4. Quando il compressore comincia
a funzionare, si sente un rumore.
I liquidi e i gas sigillati nel sistema
refrigerante possono produrre dei
rumori, anche se il compressore non
è in funzione; questo è abbastanza
normale.
5. I bordi anteriori del frigorifero possono
essere tiepidi. Questo è normale.
Queste zone sono progettate
per essere tiepide per evitare la
condensazione.
Collegamenti elettrici
Collegare il frigorifero ad una presa di
messa a terra protetta da un fusibile
della capacità appropriata.
Importante:
• Il collegamento deve essere
conforme ai regolamenti nazionali.
• La spina elettrica deve essere
facilmente accessibile dopo
l’installazione.
• La sicurezza elettrica del frigorifero è
garantita unicamente se il sistema di
messa a terra dell’apparecchiatura è
conforme agli standard.
• La tensione dichiarata sull'etichetta
che si trova nel lato interno a sinistra
dell'apparecchio deve essere pari alla
tensione di rete.
• Le prolunghe e le prese multiple
non devono essere usate per il
collegamento.
B Un cavo di alimentazione
danneggiato deve essere sostituito
da un elettricista qualificato.
B L’apparecchio non deve essere usato
finché non viene riparato! C’è rischio
di shock elettrico!
IT
7
Smaltimento del materiale di
imballaggio
I materiali di imballaggio potrebbero
essere dannosi per i bambini.
Tenere i materiali di imballaggio fuori
dalla portata dei bambini o smaltirli
classificandoli secondo le istruzioni sui
rifiuti comunicate dalle autorità locali.
Non smaltire assieme ai normali rifiuti
domestici, smaltire nei punti di raccolta
appositi indicati dalle autorità locali.
L’imballaggio del frigorifero è prodotto
con materiali riciclabili.
Smaltimento del vecchio
frigorifero
Smaltire il vecchio frigorifero senza
danni per l’ambiente.
• Bisogna consultare il rivenditore
autorizzato o il centro di raccolta rifiuti
della propria città per quanto riguarda
lo smaltimento del frigorifero.
Prima di smaltire il frigorifero, tagliare
la spina elettrica e, se ci sono blocchi
allo sportello, renderli inutilizzabili per
proteggere i bambini da eventuali
pericoli.
Posizionamento e
installazione
A Nel caso in cui la porta di ingresso
della stanza in cui il frigorifero deve
essere posizionato non è abbastanza
grande per il passaggio del frigorifero,
chiamare il servizio autorizzato per
rimuovere le porte del frigorifero e per
farlo passare attraverso la porta.
1. Installare il frigorifero in un luogo che
ne permetta il facile utilizzo.
2. Tenere il frigorifero lontano da fonti di
calore, luoghi umidi e luce diretta del
sole.
3. Intorno al frigorifero deve esserci
ventilazione appropriata per poter
avere operatività efficiente. Se il
frigorifero deve essere posizionato in
un recesso della parete, è
necessario porlo ad almeno 5 cm di
distanza dal soffitto e a 5 cm dalla
parete. Non posizionare
l'apparecchio su materiali come
tappetini o tappeti.
4. Posizionare
su superfici uniformi e piane per
evitare dondolii.
5. Non tenere il frigorifero in ambienti
con temperature inferiori ai 10°C.
l'elettrodomestico solo
Sostituzione della lampadina
interna
Per cambiare lampadina/LED utilizzati
per illuminare il frigorifero, rivolgersi al
Servizio Assistenza Autorizzato.
La lampada (le lampade) usata (usate)
nell'apparecchiatura non è (sono)
adatta (adatte) per l'illuminazione
domestica. L'obiettivo previsto per
questa lampada è quello di assistere
l'utente in fase di posizionamento degli
alimenti all'interno del frigorifero /
congelatore in modo sicuro e comodo.
Le lampadine utilizzate in questo
apparecchio devono sopportare
condizioni fisiche estreme come
temperature inferiori a -20°C.
8
IT
Inversione degli sportelli
Procedere in ordine numerico.
7
8
9
10
18
1
2
3
4
5
6
19
17
16
13
11
20
14
12
15
IT
9
4 Preparazione
• Il frigorifero dovrà essere installato ad
almeno 30 cm lontano da fonti di
calore, come forni, riscaldamento
centrale e stufe e ad almeno 5 cm
da forni elettrici e non deve essere
esposto alla luce diretta del sole.
•
La temperatura ambiente della
stanza in cui viene installato il
frigorifero deve essere almeno 10°C.
Usare il frigorifero in ambienti con
temperatura inferiore non è
consigliabile per motivi di efficienza.
• Assicurarsi che l’interno del
frigorifero sia ben pulito.
• In caso di installazione di due
frigoriferi l’uno accanto all’altro,
devono esservi almeno 2 cm di
distanza tra di loro.
• Quando il frigorifero viene messo in
funzione per la prima volta, osservare
le seguenti istruzioni per le prime sei
ore.
• La porta non si deve aprire
frequentemente.
• Deve funzionare vuoto senza alimenti
all’interno.
• Non staccare il frigo dalla presa
di corrente. Se si verifica un calo
di potenza al di là del controllo
dell'utente, vedere le avvertenze
nella sezione “Ricerca e risoluzionedei problemi”.
• Conservare i materiali originali di
imballaggio per futuri trasporti o
spostamenti.
10
IT
5 Utilizzo del frigorifero
Pannello di controllo
2
1
3
5
4
6
8
1.
Indicatore di accensione /
spegnimento
Premere il pulsante di accensione/spegnimento
per 3 secondi per spegnere o accendere il
frigorifero. Quando il frigo è spento, si accende
il simbolo ( ). Tutti gli altri simboli si spengono.
2. Funzione frigo rapido
Il pulsante ( ) ha due funzioni. Per attivare o
disattivare la funzione Quick Cool, premerlo
brevemente. L'indicatore Quick Cool si spegne
e il prodotto torna alle impostazioni normali.
Usare la funzione Quick Cool quando si
desidera raffreddare velocemente gli
alimenti posti nello scomparto frigo. Se
è necessario raffreddare grandi quantità
di cibo fresco, attivare questa funzione
prima di inserire il cibo nel frigo.
Se non si annulla manualmente, la
funzione Quick Cool si annullerà
autom aticamente dopo 1 ore al massimo o
quando lo scomparto frigo ha raggiunto la
temperatura richiesta. Questa funzione non
viene richiamata quando l'alimentazione si
ripristina dopo un'assenza di corrente.
3. Temperatura scomparto frigo:
pulsante di impostazione
Premere questo pulsante ( ) per impostare la
temperatura dello scomparto frigo
rispettivamente su 8, 7, 6, 5, 4, 3, 2, 8...
Premere questo pulsante per impostare la
temperatura desiderata per lo scomparto frigo.
4. Temperatura scomparto freezer:
pulsante di impostazione
Premere questo pulsante ( ) per impostare
la temperatura dello scomparto freezer
rispettivamente su -18, -19, -20, -21, -22,
-23, -24, -18... Premere questo pulsante per
impostare la temperatura dello scomparto
freezer secondo il valore desiderato.
5. Pulsante funzione Quick Freeze
Premere questo pulsante ( ) per attivare o
disattivare la funzione Quick Freeze. Quando
si attiva la funzione, lo scomparto freezer
viene raffreddato a una temperatura inferiore
rispetto a quella impostata.
11 IT
7
Usare la funzione Quick Freeze quando si desidera
congelare velocemente gli alimenti posti nello
scomparto freezer. Se è necessario congelare
grandi quantità di cibo fresco, attivare questa
funzione prima di inserire il cibo nel congelatore.
Se non si annulla la funzione Quick Freeze, essa si
annulla automaticamente dopo 25 ore al massimo
o quando lo scomparto congelatore ha raggiunto la
temperatura richiesta. Questa funzione non viene
richiamata quando l'alimentazione si ripristina dopo
un'assenza di corrente.
6. Avvertenza disattivazione allarme:
In caso di mancanza di alimentazione/allarme
alta temperatura, dopo aver controllare gli
alimenti posizionati nello scomparto freezer,
premere il pulsante di disattivazione dell’allarme
( ) per annullare l’avvertenza.
7. Eco Fuzzy
Tenere premuto il pulsante ( ) Eco Fuzzy per
3secondi per attivare la funzione Eco Fuzzy. Il
frigorifero inizia a funzionare nella modalità più
economica almeno 6 ore dopo e si accende
l’indicatore di uso economico ( ). Tenere
premuto il pulsante della funzione Eco Fuzzy
per 3 secondi per disabilitarla. Questo
indicatore si accende dopo 6 ore quando la
funzione Eco Fuzzy è attivato, sempre che gli
sportelli non siano aperti.
ECO indicatore sarà attivo se la temperatura
dello scomparto freezer è impostata su -18°C.
8. Funzione Vacation
Per attivare la funzione di assenza (Vacation),
premere questo pulsante ( ) per 3 secondi e
l'indicatore della modalità assenza ( ) si attiva.
Quando la funzione assenza è attiva, “- -” si
visualizza sull'indicatore della temperatura dello
scomparto frigo e non viene eseguito il
raffreddamento attivo nello scomparto frigo.
Non si possono conservare gli alimenti nello
scomparto frigo in questa funzione. Gli altri
scomparti continuano a essere raffreddati
secondo le temperature impostate. Per
annullare questa funzione, premere di nuovo il
pulsante Vacation.
Sistema dual cooling
Il frigorifero è dotato di due sistemi di
raffreddamento separati per raffreddare
lo scomparto cibi freschi e lo scomparto
freezer. In questo modo, l’aria nello
scomparto alimenti freschi e quella dello
scomparto freezer non si mescolano.
Grazie a questi due sistemi di
raffreddamento separati, la velocità di
raffreddamento è molto più alta di
quella degli altri frigoriferi. Gli odori negli
scomparti non si mischiano. Viene
fornito inoltre un risparmio energetico
aggiuntivo dal momento che lo
sbrinamento è eseguito individualmente.
Sbrinamento
A) Scomparto frigo
Lo scomparto frigo si sbrina
automaticamente.
L'acqua di sbrinamento scorre nel tubo
di scarico tramite un contenitore di
raccolta posizionato nella parte
posteriore dell'elettrodomestico.
Controllare che il tubo sia collocato in
modo stabile con l'estremità nel vassoio
di raccolta sul compressore per evitare
che l'acqua spruzzi sull'istallazione
elettrica o sul pavimento.
B) Scomparto freezer
Lo sbrinamento del tipo NO FROST è
completamente automatico. Non è
necessario alcun intervento da parte
dell’utente. L’acqua si raccoglie nel
vassoio del compressore. A causa del
calore del compressore, l’acqua evapora.
Avvertenza!
Le ventole nel freezer e negli scomparto
alimenti freschi mettono in circolo aria
fredda. Non inserire mai oggetti
attraverso la protezione. Non consentire
ai bambini di giocare con la ventola dello
scomparto alimenti freschi e del freezer.
Non conservare mai prodotti che
contengono gas propellenti infiammabili
(ad esempio erogatori, bombolette
spray, ecc.) o sostanze esplosive.
Non coprire le mensole con sostanze
protettive che possono ostruire la
circolazione dell'aria. Non permettere ai
bambini di giocare con l'elettrodomestico
o di manomettere i comandi.
12
Non ostruire la protezione della ventola per
garantire le migliori prestazioni dal proprio
elettrodomestico. Assicurarsi che le ventole
non sono bloccate (fermate) o danneggiate
da alimenti o confezioni. Il blocco (arresto)
o danneggiamento della ventola possono
provocare un aumento della temperatura
interna del freezer (sbrinamento).
Scomparto temperatura zero
Questo scomparto è stato progettato per
conservare alimenti congelati che devono
essere scongelati lentamente (carne,
pesce, pollo, ecc.) come necessario. Lo
scomparto temperatura zero è la
posizione più fredda del frigorifero in cui i
prodotti caseari (formaggio, burro), carne,
pesce o pollo possono essere conservati
nelle condizioni ideali.
Verdure e/o frutta non devono essere
poste in questo scomparto.
IT
6 Manutenzione e pulizia
A Non usare mai gasolio, benzene o
sostanze simili per scopi di pulizia.
B È consigliato scollegare l’apparecchio
prima della pulizia.
B Non utilizzare mai attrezzi appuntiti o
sostanze abrasive, saponi, detergenti
per la casa o cere per la pulizia.
C Utilizzare acqua tiepida per pulire
l'alloggiamento del frigorifero e
asciugarlo.
C Utilizzare un panno umido intriso
di una soluzione composta da un
cucchiaino di bicarbonato di soda e
da circa mezzo litro di acqua e pulire
l'interno, quindi asciugare.
B Assicurarsi che l'acqua non penetri
nel quadro di comando della
temperatura.
B Se il frigorifero non viene usato per un
lungo periodo di tempo, scollegare il
cavo di alimentazione, rimuovere tutti
gli alimenti dal suo interno, pulirlo e
lasciare lo sportello aperto.
C Controllare le guarnizioni dello
sportello periodicamente per garantire
che siano pulite e che non siano
presenti particelle di alimenti.
A Per rimuovere le rastrelliere dello
sportello, rimuovere tutto il contenuto
e spingere semplicemente le
rastrelliere verso l'alto.
ANon utilizzare mai agenti di pulizia o
acqua contenente cloro
superfici esterne e le parti rivestite in
cromo dell'apparecchio. Il cloro
provoca corrosione su tali superfici
di metallo.
per pulire le
Protezione delle superfici di
plastica
Non inserire oli liquidi o piatti cotti in
C
olio nel frigorifero se in contenitor
non sigillati poiché questi possono
danneggiare le superfici in plastica
del frigorifero. In caso di fuoriuscita
di olio sulle superfici in plastica,
pulire e asciugare le parti della
superfici con acqua tiepida.
i
13
IT
7 Ricerca e risoluzione dei problemi
Prima di chiamare il servizio assistenza, rivedere la lista precedente. Si
risparmierà tempo e denaro. Questa lista comprende frequenti reclami che non
derivano da difetti di lavorazione o dai materiali utilizzati. Alcune delle funzioni
descritte qui potrebbero non esistere nel proprio apparecchio.
Il frigorifero non funziona.
• La spina non è inserita correttamente nella presa. >>>Inserire in modo sicuro la
spina nella presa.
• Il fusibile della presa a cui è collegato il frigorifero o il fusibile principale sono
saltati. >>>Controllare il fusibile.
Condensa sulla parete laterale dello scomparto frigo (MULTIZONE, COOL
CONTROL e FLEXI ZONE).
• L'a
mbiente è molto freddo. >>>Non installare il frigorifero in luoghi in cui la
temperatura scende al di sotto di 10°C.
• Lo sportello è stato aperto con eccessiva frequenza. >>>Non aprire e chiudere
lo sportello del frigorifero con eccessiva frequenza.
• L'ambiente è molto umido. >>>Non installare il frigorifero in luoghi molto umidi.
• Gli alimenti che contengono liquidi sono conservati in contenitori aperti. >>>Non
conservare alimenti che contengono liquido in contenitori aperti.
• Lo sportello del frigorifero è lasciato aperto. >>>Chiudere lo sportello del
frigorifero.
• Il termostato è impostato ad un livello molto freddo. >>>Impostare il termostato
ad un livello adatto.
Il compressore non funziona.
• La protezione
corrente o di mancato collegamento alla presa, se il sistema refrigerante non è
ancora stato regolato. Il frigorifero comincerà a funzionare dopo circa 6 minuti.
Chiamare il servizio assistenza se il frigorifero non inizia a funzionare al termine
di questo periodo.
• Il frigorifero è nel ciclo di sbrinamento. >>>Si tratta di una cosa per un frigorifero
con sbrinamento completamente automatico. Il ciclo di sbrinamento si verifica
periodicamente.
• L'elettrodomestico non è collegato alla presa. >>>Accertarsi che la spina sia
inserita nella presa.
• Le regolazioni di temperatura non sono eseguite in modo corretto.
>>>Selezionare il valore di temperatura adatto.
• Vi è una mancanza di alimentazione. >>>Il frigorifero torna ad un
funzionamento normale quando viene ripristinata l'alimentazione.
termica del
com
press
ore è inatt
iva in caso di mancanza di
14
IT
Il rumore aumenta quando il frigorifero sta lavorando.
• La performance operativa del frigorifero può cambiare secondo i cambiamenti
della temperatura ambiente. Si tratta di una cosa normale e non di un guasto.
Il frigorifero funziona frequentemente o per lunghi periodi.
• Il nuovo apparecchio è più grande del precedente. I frigoriferi più grandi lavorano
per un più lungo periodo di tempo.
• La temperatura ambiente può essere alta. >>>È normale che l'apparecchio
funzioni per periodi più lunghi in ambienti caldi.
• Il frigorifero è stato collegato alla presa di recente o è stato riempito di cibo.
>>>Quando il frigorifero è stato appena collegato all'alimentazione o caricato
con alimenti, ci vuole più tempo per raggiungere la temperatura impostata.
Questo è normale.
• Grandi quantità di cibo caldo sono state recentemente inserite. >>>Non mettere
alimenti caldi nel frigorifero.
• Gli sportelli sono aperti con eccessiva frequenza o sono stati lasciati aperti a
lungo. >>>L’aria tiepida entrata nel frigorifero ne provoca il funzionamento per un
periodo più lungo. Non aprire gli sportelli di frequente.
• Lo sportello del freezer o dello scomparto frigo sono rimasti aperti.
>>>Controllare se gli sportelli sono perfettamente chiusi.
• Il frigo è regolato a temperatura molto bassa. >>>Regolare la temperatura del
frigorifero ad un livello più alto e attendere fno a che la stessa sia acquisita.
• La chiusura dello sportello del frigorifero o del freezer può essere usurata,
rotta o non inserita in modo appropriato. >>>Pulire o sostituire la guarnizione.
Guarnizioni rotte o danneggiate provocano il funzionamento del frigo per periodi
più lunghi per mantenere la temperatura corrente.
La temperatura ambiente è molto bassa mentre la temperatura del frigorifero
è sufficiente.
• La temperatura del freezer è regolata a temperatura molto bassa. >>>Regolare
la temperatura ad un livello più alto e controllare.
La temperatura ambiente è molto bassa mentre la temperatura del freezer
è sufficiente.
• La temperatura del frigo è regolata a temperatura molto bassa. >>>Regolare la
temperatura ad un livello più alto e controllare.
Gli alimenti che sono nei cassetti dello scomparto frigo sono congelati.
• La temperatura del frigo è regolata su un valore molto alto. >>>Regolare la
temperatura del frigo ad un livello più basso e controllare.
15
IT
La temperatura del frigo o freezer è molto alta.
• La temperatura del frigo è regolata su un valore molto alto. >>>L'impostazione della temperatura
dello scomparto frigo provoca effetti sulla temperatura del freezer. Cambiare le temperature di frigo
o freezer e aspettare finché i relativi scomparti non raggiungono una temperatura sufficiente.
• Gli sportelli sono aperti con eccessiva frequenza o sono stati lasciati aperti a lungo. >>>Non aprire
gli sportelli di frequente.
• Lo sportello è aperto. >>>Chiudere completamente lo sportello.
• Il frigorifero è stato recentemente collegato all'alimentazione o caricato con alimenti. >>>Questo è
normale. Quando il frigorifero è stato appena collegato all'alimentazione o caricato con alimenti, ci
vuole più tempo per raggiungere la temperatura impostata.
• Grandi quantità di cibo caldo sono state recentemente inserite. >>>Non mettere alimenti caldi nel
frigorifero.
Vibrazioni o rumore.
• Il pavimento non è orizzontale o stabile. >>>Se il frigorifero ondeggia quando è mosso lentamente,
equilibrarlo regolando i piedini. Accertarsi anche che il pavimento sia in piano e forte abbastanza da
sopportare il frigorifero.
• Gli articoli messi sul frigorifero possono provocare rumore. >>>Rimuovere gli articoli da sopra al
frigorifero.
Ci sono rumori che provengono dal frigorifero come gocciolamenti, spruzzo di
liquidi, ecc.
• Il flusso di liquido e gas si verifica secondo i principi operativi del frigorifero. Si tratta di una cosa
normale e non di un guasto.
Dal frigorifero si sente un fischio.
• Le ventole sono usate per raffreddare il frigorifero. Si tratta di una cosa normale e
non di un guasto.
Condensa sulla parete interna del frigorifero.
• Il clima caldo/umido aumenta il ghiaccio e la condensa. Si tratta di una cosa
guasto.
• Gli sportelli sono a
g
li sporte
• Lo sportello è aperto. >>>Chiudere completamente lo sportello.
Umidità al di fuori del frigorifero o tra le porte.
• Potrebbe esserci umidità nell'aria; questo è normale nei climi umidi. Al diminuire dell’umidità, la
condensa scompare.
Odore cattivo dentro al frigorifero.
• Non viene eseguita una pulizia regolare. >>>Pulire regolarmente l’interno del frigorifero con una
spugna, acqua tiepida o carbonato di sodio diluito in acqua.
• Alcuni contenitori o alcuni materiali per la confezione possono provocare odori. >>>Usare
contenitori diversi o marche diverse.
• Gli alimenti sono posti nel frigorifero in contenitori non coperti. >>>Tenere gli alimenti in contenitori
chiusi. I microrganismi che fuoriescono da contenitori non coperti possono provocare odori
sgradevoli.
• Rimuovere gli alimenti scaduti e che si sono rovinati nel frigorifero.
Lo sportello non è chiuso.
• Gli imballaggi degli alimenti impediscono la chiusura dello sportello. >>>Sostituire le confezioni che
ostruiscono lo sportello.
• Il frigorifero non è completamente poggiato sul pavimento. >>>Regolare i piedini per bilanciare il
frigorifero.
• Il pavimento non è orizzontale o forte. >>>Accertarsi che il pavimento sia in piano, forte e in grado di
sopportare il frigorifero.
Gli scomparti frutta e verdura sono bloccati.
• Gli alimenti potrebbero toccare il tetto del cassetto. >>>Risistemare gli alimenti nel cassetto.
pert
lli di frequente. Chiuderli se sono aperti.
i con eccessiva frequ
enza o sono stati lascia
16
IT
perti a lun
ti a
normale e
non di
>>>Non
go.
4578337717/AC
EN,IT
apr
un
ire
4578337717/AC
EN,IT
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.