Technical Specifications
XR2000
®
ENGLISH
Version 1.0 May 2000
INTELLIGATE
www.behringer.com
INTELLIGATE
The interactive Class-A Expander/Gate/Ducker
s Ultra-fast gate (< 3 µsec.) employing the UTR (Ultra Transient Response) circuit
s No clicks or pops, regardless of attack speed
s High-performance Class-A VCA
s BEHRINGER’s extremely low-noise audio op-amps
s Ultra-low distortion
s 100 dB of attenuation
s Servo-balanced inputs and outputs
s IRC (Interactive Ratio Control) expander circuit eliminates “chatter” on or around the threshold point
s Relay controlled hard-bypass with auto-bypass function during power failure (failsafe relay)
XR2000
s Cut-in delay to avoid switch-on thumps
s High precision key filters for frequency selective operation
s Key external and key listen facilities
s Accurate gain reduction meter
s Illuminated switches
s 41 detent potentiometers
s XLR and 1/4" jack connectors
s High-performance output transformer BEHRINGER OT-1 retrofittable
s Manufactured under ISO9000 certified management system
2
SPECIFICATIONS
Analog inputs
Connectors XLR and 1/4" jack
Type RF filtered, servo-balanced input
Impedance 80 kΩ, balanced
Max. input level +20 dBu balanced and unbalanced
CMR @ 1 kHz > 40 dB
Key input
Connectors 1/4" jack
Type DC de-coupled, unbalanced input
Impedance > 20 kΩ
Max. input level +20 dBu
Analog outputs
Connectors XLR and 1/4" jack
Type electronically servo-balanced output stage (optional transformer-balanced),
automatic level correction for unbalanced use (correction = 6 dB)
Impedance < 40 Ω balanced and unbalanced
Max. output level +26 dBm balanced, +20 dBm unbalanced
Key input
Connectors 1/4" jack
Type DC de-coupled, unbalanced input
Impedance < 150 Ω
Max. input level +20 dBu
System specifications
Bandwidth 5 Hz to 100 kHz, +0/-0.2 dB
Noise > -96 dBu, fully off
THD 0.01 % typ. @ +4 dBu, 1 kHz, gain 1
Crosstalk > -85 dBu @ 20 kHz
Gate section
Type UTR (Ultra Transient Response) gate
Threshold variable (-50 dBu to +20 dBu)
Attack variable (3 µs to 90 ms)
Hold variable (8 ms to 4 seconds)
Release variable (10 ms to 2 seconds)
Range variabel (0 to 100 dB)
Expander section
Type IRC (Interactive Ratio Control) expander
Ratio variable (1.2:1 to 30:1)
Key filter section
Low cut variable (30 Hz to 3 kHz, 12 dB/oct.)
High cut variable (150 Hz to 15 kHz, 12 dB/oct.)
Function switches
In/Out relay controlled hard-bypass
Filter inserting the internal key filters
Key external switching to the external key input
Key listen monitoring the external key input
Ducker switching to ducker mode
Couple linking both channels for stereo operation
3
Indicators
8 element gain reduction meter 1/3/6/10/15/20/30/40 dB
“Below” LED key signal level is below the threshold
“Hold” LED key signal level is at threshold
“Above” LED key signal level is above threshold
LED indicator for each function switch
Power supply
Mains voltages USA/Canada 120 V ~, 60 Hz
U.K./Australia 240 V ~, 50 Hz
Europe 230 V ~, 50 Hz
general export model 100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz
Fuse 100 - 120 V ~: T 320 mA H
200 - 240 V ~: T 160 mA H
Mains connection standard IEC receptacle
Physical
Dimensions (H * W * D) 1 3/4" (44.5 mm) * 19" (482.6 mm) * 8 1/2" (217 mm)
Net weight app. 3.2 kg
Shipping weight app. 4.5 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time
to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
4
The information contained in this sheet is subject to change without notice. No part of this sheet may be reproduced or
transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any
purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER and INTELLIGATE are registered trademarks. ALL RIGHTS RESER VED.
© 2000 BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany
Tel. +49 (0) 21 54 / 92 06-0, Fax +49 (0) 21 54 / 92 06-30
5
Loading...