Behringer V-Amp Pro Guitar Amp Modeling Processor Spec Sheet

Technical Specifications
Version 1.0 February 2003
ENGLISH
V-AMP PRO
V-AMP PRO
V-AMP PRO
s 32 authentic virtual amp models can be combined with any of the 15 speaker cabinet simulations, noise
gate, compressor, wah-wah, modulation effects, delay and reverb
s 125 memory locations, divided into 25 banks of 5 presets each
s Facilitates direct recording without an amp for professional guitar tones
s Easy, intuitive operation with self-explanatory controls
s Comprehensive LEDs show all current settings
s 15 rear panel connectors allow comprehensive routing and suit virtually every conceivable application
s Additional unparalleled authentic cabinet simulation with sound designed by Juergen Rath
s Stereo headphones output with adjustable volume
s Adjustable auto-chromatic tuner
V-AMP PRO
s Internal power supply unit
s Extremely low-noise instrument input ensures maximum guitar signal integrity
s Pre DSP send/return for dry recording and wet monitoring
s Stereo 1/4" line outputs controlled by master volume for live use as guitar preamp
s Balanced stereo XLR DI out with ground lift and switchable ULTRA-G cabinet simulation
s Post DSP stereo inserts for connection of external effects
s Phones output on front panel for easy access
s BNC wordclock input for external sample rate synchronization up to 96 kHz
s AES/EBU and S/PDIF connectors allow usage as an all-purpose A/D converter with 24-bit/96 kHz digital
output
s MIDI In, Out/Thru
s Manufactured under ISO9000 certified management system
2
SPECIFICATIONS
V-AMP PRO
AUDIO INPUTS
Guitar input unbalanced 1/4" TRS connector
Input impedance 1 M Max. input level +3 dBu
Pre DSP return/line in unbalanced 1/4" TRS connector
Input impedance 45 k Max. input level +9 dBu
Post DSP insert return L/R unbalanced 1/4" TRS connectors
Input impedance 40 k Max. input level +8 dBu
AUDIO OUTPUTS
Pre DSP send/line out unbalanced 1/4" TRS connector
Output impedance <1 k Max. output level +9 dBu
Analog line outputs L/R unbalanced 1/4" TRS connectors
Output impedance approx. 680 Max. output level +20 dBu
Analog DI out balanced XLR connector
Output impedance 100 Nom. level (S1 - S3) +4 dBu Nom. level (L1 and L2) -10 dBu
Post DSP insert send L/R unbalanced 1/4" TRS connectors
Output impedance 1 k Max. output level +8 dBu
Headphones connector 1/4" TRS stereo connector
unbalanced
Max. output level +15 dBu/100 (+23 dBm)
DIGITAL OUTPUTS
Type XLR (transformer-balanced) Output impedance 110 Nominal output level 3.5 V peak to peak
POWER SUPPLY
Mains voltage
U.S.A./Canada 120 V~, 60 Hz Europe/U.K./Australia 230 V~, 50 Hz Japan 100 V~, 50 - 60 Hz
General export model 120/230 V~, 50 - 60 Hz Power consumption 15 W Fuse 100 - 120 V ~: T 400 mA H
200 - 240 V ~: T 200 mA H
Mains connection Standard IEC receptacle
DIMENSIONS/WEIGHT
Dimensions (H x W x D) approx. 3 1/2" (89 mm) x 19"
(482.6 mm) x 5 1/4" (135 mm)
Weight approx. 2.6 kg (5 3/4 lbs)
Type RCA (transformer-unbalanced) Output impedance 75 Nominal output level 0.5 V peak to peak
Format AES/EBU and S/PDIF, switchable
Sample frequency 44.1 / 48 / 96 kHz internal,
WORDCLOCK INPUT
Type BNC Input impedance 50 k Nom. input level 2 - 6 V peak to peak
MIDI INTERFACE
Type 5-pole DIN jacks IN, OUT / THRU
SIGNAL PROCESSING
Converter 24-bit Delta-Sigma,
Dynamics A/D 100 dB @ preamp bypass Dynamics D/A 92 dB Sampling rate 31.250 kHz DSP 100 Mips Delay time max. 1.933 ms stereo Runtime (line in -> line out) approx. 5 ms
(not grounded, unbalanced)
44.1 - 96 kHz wordclock, sample rate converter
64/128 oversampling
DISPLAY
Type 2-digit numeric LED
BEHRINGER constantly strives to maintain the highest quality standards. Modifi­cations may be made, if necessary, without prior notice. The specifications and appearance of the equipment may therefore differ from those listed or illustrated.
3
V-AMP PRO
The information contained in this publication is subject to change without notice. No part of this publication may be reproduced or
transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any
purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. All the registered trademarks,
names of musicians and groups are the property of their respective owners and are in no way associated with BEHRINGER.
ALL RIGHTS RESERVED. © 2003 BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany
BEHRINGER and ULTRA-G are registered trademarks.
BEHRINGER Instrument Amplification is a Division of BEHRINGER.
Tel. +49 (0) 21 54 / 92 06-0, Fax +49 (0) 21 54 / 92 06-30
4
Loading...