ENGLISH
User Manual
U-PHONO UFO202
High-quality USB Audio
Thank you
Thank you for choosing the new UFO202 U-PHONO interface from
BEHRINGER. You will now be able to transfer all your great albums
from the vinyl and tape eras into the digital realm with the help of
this easy-to-use device. It features stereo RCA inputs and outputs
to allow both monitoring and recording of the audio source. The
USB connection will work with either PCs or Mac computers, so no
drivers are needed for installation, and power is supplied through
the USB cable. The separate headphones output allows you to
play back your recordings at any time, even if you don’t have any
loudspeakers available. We’ve also included free software to help
you transfer and edit the music in a streamlined fashion, allowing
you to spend less time fidgeting with settings and more time
listening to your favorite songs.
Interface with Built-in Phono
Preamp and Massive Software
Package for Digitalizing Your
Tapes and Vinyl Records
Table of Contents
Thank you ..................................................................... 1
Important Safety Instructions ................................... 2
Before You Get Started ............................................... 3
Shipment ....................................................................................................3
Initial operation .......................................................................................3
Online registration .................................................................................3
System Requirements ................................................. 3
Hardware connection ...........................................................................3
Operating Elements and Connections ..................... 3
Software Installation................................................... 4
Hookup Diagram ......................................................... 4
Hooking up a record player ...........................................................4
Hooking up a tape player ...............................................................4
Recording Process ....................................................... 4
Audio Connections ...................................................... 5
Wiring ...........................................................................................................5
Specifications ............................................................... 5
Legal Disclaimer .......................................................... 6
Warranty ....................................................................... 7
This manual is available in English, German, French,
Spanish, Italian, Russian, Polish, Dutch, Finnish, Swedish,
Danish, Portugese, Greek, Japanese and Chinese. There may
also be more current versions of this document. Download them
by going to the appropriate product page at:
www.behringer.com
A50-A1230-08001
ENGLISH
U-PHONO UFO202 User Manual
2
Important Safety Instructions
Caution
!
To reduce the risk of electric shock, do not remove the top
cover (or the rear section). No user serviceable parts inside;
refer servicing to qualified personnel.
*
To reduce the risk of fire or electric shock, do not expose
this appliance to rain and moisture. The apparatus shall
not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the
apparatus.
*
This symbol, wherever it appears, alerts you to the presence
of uninsulated dangerous voltage inside the enclosure—
voltage that may be sufficient to constitute a risk of shock.
Caution
Caution
Caution
!
Read these instructions.
{1}.
Keep these instructions.
{2}.
Heed all warnings.
{3}.
Follow all instructions.
{4}.
Do not use this apparatus near water.
{5}.
Clean only with dry cloth.
{6}.
Do not install near any heat sources such as radiators, heat registers, stoves,
{7}.
or other apparatus (including amplifiers) that produce heat.
Only use attachments/accessories specified by the manufacturer.
{8}.
Refer all servicing to qualified service personnel. Servicing is required when
{9}.
the apparatus has been damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
CAUTION - These service instructions are for use by qualified service
[10].
personnel only. To reduce the risk of electric shock do not perform any
servicing other than that contained in the operation instructions unless you
are qualified to do so.
Caution
!
This symbol, wherever it appears, alerts you to important
operating and maintenance instructions in the
accompanying literature. Please read the manual.
ENGLISH
U-PHONO UFO202 User Manual
3
Intel or AMD CPU, 400 MHz or higher
PC
Minimum 128 MB RAM
USB 1.1 interface
Windows XP, 2000
G3, 300 MHz or higher
MAC
Minimum 128 MB RAM
USB 1.1 interface
Mac OS 9.0.4 or higher, 10.X or higher
58 67
134 2
Before You Get Started
Shipment
Your UFO202 was carefully packed at the assembly plant to
assure secure transport. Should the condition of the cardboard
box suggest that damage may have taken place, please inspect
the unit immediately and look for physical indications of
damage.
Damaged equipment should NEVER be sent directly to us.
◊
Please inform the dealer from whom you acquired the unit
immediately as well as the transportation company from
which you took delivery. Otherwise, all claims for replacement/repair may be rendered invalid.
Please always use the original packaging to avoid damage
◊
due to storage or shipping.
Never let unsupervised children play with the equipment
◊
or with its packaging.
Please dispose of all packaging materials in an environmen-
◊
tally friendly fashion.
Initial operation
Please make sure the unit is provided with sufcient ventilation, and never place the UFO202 on top of an amplier or in the
vicinity of a heater to avoid the risk of overheating.
The current supply is made via the USB connecting cable, so
that there is no external power supply unit required. Please
adhere to all required safety precautions.
System Requirements
The UFO202 is PC and Mac-compatible. Therefore, no
◊
installation procedure or drivers are required for the
correct functioning of the UFO202.
To work with the UFO202, your computer must fulll the
following minimum requirements:
Hardware connection
Use the USB connecting cable supplied with the UFO202 to
connect the unit to your computer. The USB connection also
supplies the UFO202 with current. You can connect a variety of
devices and equipment to the inputs and outputs.
Operating Elements and Connections
Online registration
Please do remember to register your new BEHRINGER equipment right after your purchase by visiting www.behringer.com
(alternatively www.behringer.de) and kindly read the terms and
conditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to
have it repaired as quickly as possible. To arrange for warranty
service, please contact the retailer from whom the equipment
was purchased. Should your BEHRINGER dealer not be located
in your vicinity, you may directly contact one of our subsidiaries.
Corresponding contact information is included in the original
equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be
found in the support area of our website (www.behringer.com/
support).
Registering your purchase and equipment with us helps us
process your repair claims quicker and more efciently.
Thank you for your cooperation!
[1]
[2]
[3]
[4]
L and R RCA outputs
device, such as a pair of monitor speakers, to the left and
right RCA outputs. (this step is optional)
L and R RCA inputs
player, tape player, etc.) to the left and right RCA inputs.
Ground connection
separate ground cable. If so, attach the cable to the ground
terminal to avoid excessive noise and hum.
Line/Phono switch
PHONO if transferring from a record player. For all other
sources, select LINE.
– Connect an external monitoring
– Connect the audio source (record
– Some record players have a
– Move the switch on the top left to
ENGLISH
U-PHONO UFO202 User Manual
4
Headphone Out
RCA Outputs
RCA Ins
Ground
Line/Phono
Computer USB
Headphone Out
RCA Outputs
RCA Ins
Line/Phono
Computer USB
Note: The PHONO inputs only support moving magnet
cartridges. These are the most common type, so unless
you know your player uses a moving coil cartridge,
assume that your system will work.
Headphones output
[5]
– Plug your headphones into the
PHONES output using a ⅛" mini plug.
Headphones volume
[6]
– Adjust the headphones volume
with the adjacent control.
USB cable
[7]
– Plug the USB cable into a free USB port on
your computer.
Power indicator
[8]
– Upon connection, the UFO’s power
indicator will light up and the computer should automatically recognize the connection.
Software Installation
This device requires no special setup or drivers, just plug it •
into a free USB port on a PC or Mac computer.
The UFO202 comes with a free version of Audacity editing •
software. This will help make the transfer process quick and
simple. Simply insert the install CD into your CD-ROM drive
and follow the instructions. The CD also contains VST plugins, ASIO drivers and various freeware.
For other audio needs, such as advanced editing, instru-•
ment recording, sequencing, etc., a free version of energyXT2
Compact BEHRINGER edition is also included.
Hookup Diagram
a ground cable that needs to be attached to the ground terminal
on the UFO202.
3. Connect a monitoring device. You may plug speakers into the
RCA outputs or connect a pair of headphones to the PHONES
output.
4. Connect the attached USB cable to a free USB port on your
computer.
Hooking up a tape player
1. Move the LINE/PHONO switch on the UFO202 to the left
(LINE selected).
2. Connect a stereo RCA cable from the tape player outputs to
the RCA inputs on the UFO202.
3. Connect a monitoring device. You may plug speakers into the
RCA outputs or connect a pair of headphones to the PHONES
output.
4. Connect the attached USB cable to a free USB port on your
computer.
Recording Process
After hookups have been made and software installed, you •
are ready to record the audio. Make sure your audio recording
program is set to record input from the USB port. For simple
record, cut, and export of stereo audio, you may prefer to use
Audacity. For more extensive editing, energyXT2 Compact
may be the best choice
If recording from a tape player, make sure the player's volume •
is turned up all the way.
Adjust the input sensitivity of the recording program to •
Hooking up a record player
1. To transfer music from a record player, a special preamplication process must take place in order to boost the low signal
level coming from the player. To do this, simply move the LINE/
PHONO switch on the UFO202 to the right (PHONO selected).
2. Connect a stereo RCA cable from the record player outputs to
the RCA inputs on the UFO202. The player will also likely have
achieve optimal sound quality. Too much signal will cause the
recording to distort; too little signal will sound faint and thin,
so record a test clip to ensure quality sound. The recording
program should have meters that display the levels as the
audio streams.
ENGLISH
U-PHONO UFO202 User Manual
5
shield
sleevesleeve
tip tip
SleeveSleeve
TipTip
Set your recording program on your computer to RECORD, •
and begin playing the start of the tape or record immediately
after.
Let the audio play all the way through the rst side. Once the •
music stops, press STOP on the recording program.
Flip the tape or record over and repeat the recording process. •
Once both sides are recorded, you may edit the le to cut out •
any extra time before or after the audio was captured. You
may also cut the long track into individual songs and save
the les separately. This process differs slightly depending on
what program you are using, so refer to the software manual
for editing procedures.
You can play back your stereo recorded audio through the •
UFO202 RCA outputs and PHONES output. You may want to
apply equalization or other processing if your software
application is so equipped.
If you plan to burn these les to a CD for use in a home stereo •
or car, save the audio in WAV format.
Audio Connections
Although there are various ways to integrate the UFO202 into
your studio or live set-up, the audio connections to be made will
basically be the same in all cases:
Wiring
Please use standard RCA cables to connect the UFO202 to other
equipment:
Specifications
LINE IN
Connectors RCA, unbalanced
Input impedance approx. 27 kΩ
Max. input level 2 dBV
LINE OUT
Connectors RCA, unbalanced
Output impedance approx. 400 Ω
Max. output level 2 dBV
DIGITAL OUTPUT
Socket Toslink, optical cable
Output format S/PDIF
PHONES OUT
Socket ⁄" TRS stereo jack
Output impedance approx. 50 Ω
Max. output level -2 dBu, 2 x 3,7 mW @ 100 Ω
USB 1.1
Connectors type A
DIGITAL PROCESSING
Converter 16-bit converter
Sample rate 32.0 kHz, 44.1 kHz, 48.0 kHz
SYSTEM DATA
Frequency response 10 Hz to 20 kHz, ± 1 dB @ 44.1 kHz sample rate
10 Hz to 22 kHz, ± 1 dB @ 48.0 kHz sample rate
THD 0.05 % typ. @ -10 dBV, 1kHz
Crosstalk -77 dB @ 0 dBV, 1 kHz
Signal-to-noise ratio A/D 89 dB typ. @ 1 kHz, A-weighted
D/A 96 dB typ. @ 1 kHz, A-weighted
You can also use a ¼" adapter cable:
Headphones connection
The UFO202 is provided with a headphones jack. Here, you can
connect any standard pair of stereo headphones with a ⅛" TRS
connector.
POWER SUPPLY
USB connection 5 V , 100 mA max.
DIMENSIONS/WEIGHT
Dimensions (H x W x D) approx. 22 mm (0.87") x 88 mm (3.46") x
60 mm (2.36")
Weight approx. 0.12 kg
BEHRINGER always takes great care to ensure the highest standard of quality. Any modifications
which may be necessary will be made without prior notification. Technical data and appearance of the
equipment can therefore differ from the details or illustrations shown.
ENGLISH
U-PHONO UFO202 User Manual
6
Legal Disclaimer
Technical specications and appearance are subject to change without notice.
The information contained herein is correct at the time of printing. All
trademarks (except BEHRINGER, the BEHRINGER logo, JUST LISTEN and
U-PHONO) mentioned belong to their respective owners, and such use neither
constitutes a claim of the trademarks by BEHRINGER nor afliation of the
trademark owners with BEHRINGER. Mac and Mac OS are trademarks of
Apple Computer, Inc., registered in the U.S. and other countries. Windows is a
registered trademark of Microsoft Corporation in the United States and other
countries. ASIO is a trademark and software of Steinberg Media Technologies
GmbH. VST is a trademark of Steinberg Media Technologies GmbH. AMD is
a trademark or registered trademark of Advanced Micro Devices, Inc. Intel
is a trademark or registered trademark of Intel Corporation or its subsidiar-
ies in the United States and other countries. energyXT2, energyXTC and the
energyXT logo are trademarks of XT Software AS incorporated in Norway, and
are protected under the laws of Norway, and are being used under license by
Behringer Holdings (Pte) Ltd and related companies. BEHRINGER, accepts
no liability for any loss which may be suffered by any person who relies either
wholly or in part upon any description, photograph or statement contained
herein. Colors and specications may vary slightly from product. Our products
are sold through authorized dealers only. Distributors and dealers are not agents
of BEHRINGER, and have absolutely no authority to bind BEHRINGER, by any
express or implied undertaking or representation. No part of this manual may be
reproduced or transmitted in any form or by any means, electronic or mechani-
cal, including photocopying and recording of any kind, for any purpose, without
the express written permission of BEHRINGER International GmbH.
ALL RIGHTS RESERVED. © 2009 BEHRINGER, International GmbH,
Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich, Germany.
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
ENGLISH
U-PHONO UFO202 User Manual
7
Other warranty rights and national law§ 1
This warranty does not exclude or limit the buyer’s statutory rights provided
[1].
by national law, in particular, any such rights against the seller that arise
from a legally effective purchase contract.
The warranty regulations mentioned herein are applicable unless they
[2].
constitute an infringement of national warranty law.
Online registration§ 2
Please do remember to register your new BEHRINGER equipment right after
your purchase by visiting http://www.behringer.com and kindly read the terms
and conditions of our warranty carefully. Registering your purchase and equip-
ment with us helps us process your repair claims quicker and more ef ciently.
Thank you for your cooperation!
Warranty§ 3
BEHRINGER (BEHRINGER International GmbH including all
[1].
BEHRINGER subsidiaries, except BEHRINGER Japan) warrants the
mechanical and electronic components of this product to be free of defects in
material and workmanship for a period of one (1) year
*
from the original date
of purchase, in accordance with the warranty regulations described below. If
the product shows any defects within the speci ed warranty period that are
not excluded from this warranty as described under § 5, BEHRINGER shall,
at its discretion, either replace or repair the product using suitable new or
reconditioned parts. In the case that other parts are used which constitute
an improvement, BEHRINGER may, at its discretion, charge the customer
for the additional cost of these parts.
If the warranty claim proves to be justi ed, the product will be returned to
[2].
the user freight prepaid.
Warranty claims other than those indicated above are expressly excluded.
[3].
Return authorization number§ 4
To obtain warranty service, the buyer (or his authorized dealer) must
[1].
call BEHRINGER during normal business hours BEFORE returning the
product. All inquiries must be accompanied by a description of the problem.
BEHRINGER will then issue a return authorization number.
Subsequently, the product must be returned in its original shipping carton,
[2].
together with the return authorization number to the address indicated by
BEHRINGER.
Shipments without freight prepaid will not be accepted.
[3].
Warranty regulations§ 5
Warranty services will be furnished only if the product is accompanied by a
[1].
copy of the original retail dealer’s invoice. Any product deemed eligible for
repair or replacement under the terms of this warranty will be repaired or
replaced.
If the product needs to be modi ed or adapted in order to comply with appli-
[2].
cable technical or safety standards on a national or local level, in any country
which is not the country for which the product was originally developed and
manufactured, this modi cation/adaptation shall not be considered a defect
in materials or workmanship. The warranty does not cover any such modi -
cation/adaptation, irrespective of whether it was carried out properly or not.
Under the terms of this warranty, BEHRINGER shall not be held respon-
sible for any cost resulting from such a modi cation/adaptation.
Free inspections and maintenance/repair work are expressly excluded from
[3].
this warranty, in particular, if caused by improper handling of the product
by the user. This also applies to defects caused by normal wear and tear, in
particular, of faders, crossfaders, potentiometers, keys/buttons, tubes, guitar
strings, illuminants and similar parts.
Damage/defects caused by the following conditions are not covered by this
[4].
warranty:
improper handling, neglect or failure to operate the unit in compliance •
with the instructions given in BEHRINGER user or service manuals;
connection or operation of the unit in any way that does not comply with •
the technical or safety regulations applicable in the country where the
product is used;
damage/defects caused by force majeure or any other condition that is •
beyond the control of BEHRINGER.
Any repair or opening of the unit carried out by unauthorized personnel
[5].
(user included) will void the warranty.
If an inspection of the product by BEHRINGER shows that the defect in
[6].
question is not covered by the warranty, the inspection costs are payable by
the customer.
Products which do not meet the terms of this warranty will be repaired ex-
[7].
clusively at the buyer’s expense. BEHRINGER will inform the buyer of any
such circumstance. If the buyer fails to submit a written repair order within
6 weeks after noti cation, BEHRINGER will return the unit C.O.D. with
a separate invoice for freight and packing. Such costs will also be invoiced
separately when the buyer has sent in a written repair order.
Warranty transferability§ 6
This warranty is extended exclusively to the original buyer (customer of retail
dealer) and is not transferable to anyone who may subsequently purchase this
product. No other person (retail dealer, etc.) shall be entitled to give any war-
ranty promise on behalf of BEHRINGER.
Claim for damage§ 7
Failure of BEHRINGER to provide proper warranty service shall not entitle
the buyer to claim (consequential) damages. In no event shall the liability of
BEHRINGER exceed the invoiced value of the product.
*
Customers in the European Union please contact BEHRINGER Germany Support for further details.
Warranty
ENGLISH
U-PHONO UFO202 User Manual
8
FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION
U-PHONO UFO202
Responsible party name: MUSIC Group Services USA, Inc.
Address: 18912 North Creek Parkway,
Suite 200 Bothell, WA 98011,
USA
Phone/Fax No.: Phone: +1 425 672 0816
Fax: +1 425 673 7647
U-PHONO UFO202
complies with the FCC rules as mentioned in the following paragraph:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pur suant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful inter ference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful inter ference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to tr y to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which the •
receiver is connec ted.
Consult the dealer or an experienced radio/TV technician for help.•
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any inter ference received, including inter ference that may
cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by MUSIC Group
can void the user ’s authority to use the equipment.
ENGLISH
U-PHONO UFO202 User Manual
9
ENGLISH
This manual is available in English, German, French,
Spanish, Italian, Russian, Polish, Dutch, Finnish, Swedish,
Danish, Portugese, Greek, Japanese and Chinese. There may
also be more current versions of this document. Download them
by going to the appropriate product page at:
www.behringer.com
Loading...