Behringer RV600 User Manual

REVERB MACHINE RV600

Thank you for showing your confidence in us by purchasing the BEHRINGER REVERB MACHINE
RV600. This ultimate effects pedal is specifically designed to deliver 24-bit, high-resolution stereo
reverbs comparable to state-of-the-art studio processors. Thanks to its 11 well-known modes and the
extensive parameter control that allow for maximum creativity, you’ll have plenty of great sounds at
your disposal for every situation.

1. CONTROLS

T op view

The TONE control allows you to shape your overall sound.
The MIX control determines the amount of reverb added to the signal.
The DECAY control determines how quickly the reverb fades. In ECHO mode, it determines the

amount of signal feedback.
The blue ON/BATT LED illuminates when the effect is activated. It also serves as a battery

level indicator.
The TIME control determines the pre-delay time, that is, the delay time between the original dry

sound and the actual, audible reverb effect. In SPACE mode, it determines the harmonic
density of the signal.

This control lets you choose one of the eleven reverb type effects:

ECHO: Very fat echo with reverb.
TILE: Emulates the acoustics of a tiled room with bright early reflections, like a bathroom.
CAVE: Deep and large echo, like being inside a cave.
SPACE: Ambiental, lush reverb with a dense, harmonized, octave-shifted content.
DUCKNG: Hall reverb with a ducking effect. The reverb “ducks” under your instrument’s signal

while you are playing to avoid clouding your sound, and reemerges when you stop, adding a rich
and smooth tail to it.

HALL: Bright and open reverb that simulates the reflections of a concert hall.
CHMBR: Emulates the highly reflective acoustics of a typical reverb chamber.
ROOM: Clear and natural acoustics of a room.
PLATE: Metallic, resonant sound of a plate reverb.
SPRING: Simulates the distinct and beloved sound of a spring reverb.
‘63 SP: Emulates the classic sound of a 1963 guitar combo spring reverb.

With the TRAILS switch turned on, the reverb will smoothly fade away once you bypass the
effect instead of simply being cut off.

Use the two 1/4" TS connectors IN A and IN B to plug in a stereo input signal. For mono signals
connect to IN A.

The two 1/4" TS connectors OUT A and OUT B send the signal to your amp. Use both outputs to
achieve a full stereo effect. For mono use, connect to OUT A.

Use the footswitch to activate/deactivate the effect.

Use the DC IN connection to plug in a 9 V power supply (not included).

The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V
battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful
not to scratch the unit.

REVERB MACHINE RV600

 The RV600 has no on/off switch. As soon as you insert the plug into the IN connector,

the RV600 is on. When not using the RV600, remove the plug from the IN connector.
This extends the life of the battery.

The SERIAL NUMBER is located on the underside.

 In rare cases interferences of the normal function may appear by external influence (e.g.

electrostatic discharge), as for example sound disturbances or malfunctions. If this
occurs, please turn down the volume on subsequent amplifiers and disconnect the
input connector briefly to restart the application.

2. WARRANTY

For our current warranty terms, please refer to our website at http://www.behringer.com.

3. SPECIFICATIONS

IN A IN B

Connector 1/4" TS Connector 1/4" TS
Impedance 500 kΩ Impedance 500 kΩ
Impedance mono 250 kΩ

OUT A OUT B

Connector 1/4" TS Connector 1/4" TS
Impedance 1 kΩ Impedance 1 kΩ

Power supply 9 V_, 100 mA, regulated

Power connector 2 mm DC jack, negative center
Battery 9 V type 6LR61
Power consumption 30 mA
Dimensions (H x W x D) approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5")

Weight approx. 0.33 kg (0.73 lbs)

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made
from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.

BEHRINGER PSU-SB
U.S.A./Canada 120 V~, 60 Hz
China 220 V~, 50 Hz
Korea 220 V~, 60 Hz
Europe/U.K./Australia 230 V~, 50 Hz
Japan 100 V~, 50 – 60 Hz

Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself.

4. SAFETY INSTRUCTIONS

Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.
No utilizar cerca de agua o instalar cerca de fuentes de calor. Utiliza sólo accesorios y aditamentos autorizados. No intentes

reparar el producto tú mismo. Contacta a nuestro personal técnico cualificado para servicio y reparaciones, especialmente

cuando la fuente o el cable de alimentación estén dañados.

Не эксплуатируйте прибор вблизи от источников воды и тепла. Применяйте только авторизованные дополнительные
устройства. Никогда не ремонтируйте прибор самостоятельно. Ремонт может производить только квалифицированный
специализированный персонал, особенно при повреждениях сетевого провода или сетевой вилки.

Die deutsche Anleitung ist erhältlich @ www.behringer.com
Manuel francophone en téléchargement sur www.behringer.com
Manual en español disponible en www.behringer.com
Manuali italiani disponibili @ www.behringer.com

Русскоязычное руководство @ www.behringer.com

Polska instrukcja dostępna jest pod adresem @ www.behringer.com

Nederlandse handleiding beschikbaar @ www.behringer.com
Suomenkielinen käyttöohje saatavilla osoitteesta www.behringer.com
Svensk manual finns tillgänglig på www.behringer.com
Dansk vejledning findes på @ www.behringer.com
Manual português disponível @ www.behringer.com

Еллзнйкь егчейсЯдйп хрЬсчей дйбиЭуймп уфз дйеэихнуз www.behringer.com

Technical specifications and appearance subject to change without notice. The information contained herein is correct at
the time of printing. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either
wholly or in part upon any description, photograph or statement contained herein. Colors and specification may vary
slightly from product. Products are sold through our authorized dealers only. Distributors and dealers are not agents of
BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or
representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of
BEHRINGER International GmbH. ALL RIGHTS RESERVED. © 2006 BEHRINGER International GmbH, Hanns­Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany . T el. [phone], Fax [phone]