Technical Specifications
Version 1.0 November 2003
ENGLISH
V-VERB PRO REV2496
V-VERB PRO REV2496
V-VERB PRO
Ultra High-Performance 24-Bit/96 kHz Dual-Engine Reverb Modeler
REV2496
s Reference-class reverb modeling processor with high-quality 24-bit/96 kHz A/D and D/A converters
s Full 4-channel operation up to 96 kHz without any limitations, providing two separate effects processors
in one unit
s 8 high-end reverb algorithms, modeled after world-class reverb processors
s Additional high-quality modulation effects from X-over Delay to Chorus/Flanger plus stereo Compressor
s Full-featured digital interface with AES/EBU In/Out, optical S/PDIF In/Out, Wordclock In and MIDI function
for flexible use with digital equipment
s Ultra high-resolution SHARC® processor with 32-bit internal signal processing for ultimate sonic resolution
s 10 different routing types for flexible assignment of analog and digital connectors to both stereo engines
s Innovative user interface with soft push/turn encoders, big preset wheel, high-resolution graphic
LCD display and additional TAP button for delay times
s Direct access to 4 effect parameters makes editing easy and comfortable
s Intuitive editing of up to 30 parameters using specially designed graphic mode
s Separate ROM and user preset banks with 400 presets total
s Balanced inputs and servo-balanced outputs with gold-plated XLR and ¼ TRS connectors
s Open architecture allows future software updates via MIDI
s Internal switch-mode power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior
transient response plus lowest possible power consumption for energy saving
s Ultra-rugged construction ensures long life, even under most demanding conditions
s Designed in Germany. Manufactured under ISO9000 certified management system
2
V-VERB PRO REV2496
ANALOG INPUTS
SPECIFICATIONS
Type XLR balanced
Impedance approx. 22 kΩ balanced
Max. input level +16 dBu
CMRR typ. 40 dB
ANALOG OUTPUTS
Type XLR, servo-balanced
Impedance approx. 100 Ω balanced
Max. output level +16 dBu
SYSTEM SPECIFICATIONS
Frequency range <10 Hz - 20 kHz @ 44.1 kHz
Signal-to-noise ratio -90 dBu
Dynamic range 106 dB (analog in ß analog out)
THD 0,007% typ. @ +4dBu, 1 kHz, Gain 1
Crosstalk < -100 dB (analog in ß analog out)
Signal delay < 1 ms (analog in ß analog out)
DIGITAL INPUT 1
Type XLR servo-balanced
Standard AES/EBU or S/PDIF
input impedance 110 Ω
nominal input level 0.2 - 5 V peak-to-peak
DIGITAL INPUT 2
Type TOSLINK optical
Standard AES/EBU or S/PDIF
1/4" TRS stereo balanced
1/4" TRS stereo servo-balanced
<10 Hz - 22 kHz @ 48 kHz
<10 Hz - 46 kHz @ 96 kHz
DIGITAL OUTPUT 1
Type XLR servo-balanced
Standard AES/EBU or S/PDIF
DIGITAL OUTPUT 2
Type TOSLINK optical
Standard AES/EBU or S/PDIF
SYNC INPUT
Type BNC
Standard Wordclock (1 x sample rate)
input impedance approx. 50 kΩ
Nom. level 2 - 6 V peak-to-peak
MIDI Interface
Type 5-pin DIN jacks In/Out/Thru
Implementation cf. MIDI implementation chart
DIGITAL PROCESSING
Processor high-resolution SHARC® DSP, 600 MFLOPs, 32-bit internal signal processing
Converter 24 Bit/96 kHz
Sample rate external, 44.1 kHz, 48 kHz, 96 kHz
DISPLAY
Type 128 x 64 backlit liquid crystal display (green) with adjustable contrast
MEMORY
Presets 100 ROM + 100 user presets for engines A and B, 100 ROM + 100 user presets for combinations
POWER SUPPLY
Mains voltage 85 250 V~, 50 60 Hz
Power consumption 10 W typ.
Fuse T 1 A H
Mains connector Standard receptacle
DIMENSIONS/WEIGHT
Dimensions 19" (482.6 mm) x 1 ¾" (44.5 mm) x 8 ½" (217 mm)
Weight approx. 4 ¾" lbs. (2.15 kg)
BEHRINGER makes every effort to ensure the highest standard of quality. Necessary modifications are carried out without notice. Thus, the
specifications and design of the device may differ from the information given in this manual.
3
V-VERB PRO REV2496
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing.
SHARC® as well as the names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks
of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER® nor affiliation of the trademark owners with
BEHRINGER®. BEHRINGER® accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any
description, photograph or statement contained herein. Colors and specifications depicted may vary slightly from product. No part of this book may
be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any
purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered trademark.
© 2003 BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38,
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
ALL RIGHTS RESERVED.
47877 Willich-Münchheide II, Germany
4
Loading...