Behringer MX882 Product Information

Product Information Document
Rackmount Mixers
ULTRALINKPRO MX882
Ultra-Flexible 8-Channel Splitter/Mixer
Ultra-low noise 8 in/2 out line mixer
#
and 2 in/8 out line splitter
#
independently in mixer or splitter mode
Usable as 6 in/6 out level matching
#
ampli er or direct injection box
Converts levels between
#
-10 dBV and +4 dBu
Extremely wide bandwidth
#
from 5 Hz to 200 kHz for highest signal integrity
6 mono in, 6 mono out, 2 main
#
inputs and 2 outputs
⁄-segment input/output level
#
meters for all channels
High-quality components and
#
exceptionally rugged construction ensure long life
3-Year Warranty Program*
#
Conceived and designed by
#
BEHRINGER Germany
The MX882 is de nitely one piece
of gear every audio engineer and
musician should always have close
at hand. This ultra- exible, little “life
saver” has proven invaluable time
and time again in live performances,
professional recording studios,
CD and digital production facilities,
and a variety of other scenarios
where the show simply had to go on!
The MX882 is ideal for distributing a
stereo signal to several outputs (splitter mode); combining multiple signals
into a stereo output (mixer mode), or adapting signal levels of signals
for a variety of audio applications (bu er ampli er). The ULTRALINK PRO
MX882 can perform all of these functions easily and simultaneously – it is
quite literally, the audio version of a “Swiss Army Knife”.
*Warrant y details can be fo und at music-group.c om.
Product Information Document
Rackmount Mixers
ULTRALINKPRO MX882
Ultra-Flexible 8-Channel Splitter/Mixer
Its a Mixer – Its a Splitter
Basically, the MX882 consists of 6 mono channels, which can be used either as a splitter or as a mixer. For instance, a stereo program source can be connected via the Main Inputs, and then routed to any of the mono channels set to Split mode. For our example, we’ll use Channel 1 with the Split/Mix switch in the out (Split) position. Adjust the Channel 1 Balance/Pan control to set how much of the Left and Right Main Input signal is routed to the Channel 1 mono Output XLR. And you can do the same thing with all 6 of the MX882 channels.
In Mix mode, the input signals from any, or all, of the MX882’s 6 channels can be mixed to the stereo Main Output, with their individual Balance/Pan controls determining the signal’s placement within the stereo image (Pan). It is advantageous that when operating in Mix mode, the stereo Main Input signal is automatically sent to the Main Outputs – allowing you to combine a total of up to 8 individual signals. The mono Input signals are still sent to their mono outputs, which means each channel can also be used as an individual matching ampli er. The Level controls for the corresponding channels enable the user to adapt the levels at will, with a maximum gain of +15 dB. Levels used in home-recording can easily be converted into studio levels (+4 dBu), and vice versa.
Typical Applications
As we mentioned above, the ULTRALINK PRO MX882 is one of the most  exible systems of its type. Below are just a few of the applications the multitasking MX882 can accommodate:
• Keyboard or drum submixer
• Distribution ampli er for PA systems, dance clubs, theatres, churches, hotels, communication systems, etc.
• Add-on module for mixer channels
• Add-on module for FX and monitor paths
• Level translator from -10 dBV to +4 dBu, or vice versa
2 of 5
Loading...
+ 3 hidden pages