Model D Firmware
Version 1.1.1 - (19 December 2018)
Firmware Update Tools
Note: This is a software synth tool for MODEL D. The latest rmware is bundled within the application,
there is no requirement for a separate rmware le.
• Environment Requirement: Microsoft Windows 7 or above
Mac OS v10.11 or above
• Model Name: Model D
• Model Code: P0CQJ
• Firmware version: 1.1.1
Addressed Issues
1. New Synth Tool app for easier conguration of the MODEL D via the USB input.
2. Added new Mac OS support.
3. Improved the Poly Chain function to make it easier to setup and use.
4. Improved re-trigger reliability when playing with legato notes.
5. Mac version doesn’t support the rmware earlier than v1.0.5.
6. Add a function to SAVE and LOAD user setting le to the APP.
7. Fixed the notes logic issue in legato mode (multi-trigger o mode) found in the v1.1.0.
musictribe.com behringer.com
page 1 of 6
Introducing the New Poly Chain
Now if you have multiple MODEL D units you can connect them together and easily produce
polyphonic timbres and sounds. Poly Chain is no longer enabled/disabled by SysEx messages and
must be congured the rst time via the MODEL D Synth Tool. To enable and congure the Poly
Chain mode:
1. Connect your MODEL D units together as shown in the illustration below.
2. Power on your units and start the “MODEL D Synth Tool”.
musictribe.com behringer.com
page 2 of 6
Loading...