Behringer DCX2496 Specification Sheet

Technical Specications

ULTRAGAIN PRO MIC2200

Audiophile Vacuum Tube Microphone/Line Preamplier

2 ULTRAGAIN PRO MIC2200 Technical Specifications

ULTRAGAIN PRO MIC2200

Audiophile Vacuum Tube Microphone/Line Preamplier

3 analog input s (one suitable as digital stereo AES/EBU input) and 6 analo g outputs for maximum exibilit y

High-end 24-bit/96 kHz A /D and D/A conver ters for ultimate signal integrity and wide dynamic range (113 dB)

Integrated s ample rate converter for eas y connection of external digit al signals with sampling rate s from 32 to 96 kHz

Precise Dy namic EQs for level-dependent equaliz ation and extremely musical Parametric EQs, selectable for all inputs and outputs

Several ty pes of EQs (LP/BP/HP) for each input and output

“Zero”-attac k Limiters on all output channels for optimal speaker protection

Four dierent mono and stereo output operating modes

Individual crossover lter types (Butterworth, Bessel and Link witz-Riley) with selectable roll-o characteristics f rom 6 to 48 dB/octave

Adjustable Delays for all inputs and outputs—allow manual or automatic correc tion for room temperature, phase and arrival time dierences

Additional Sum signal derived from the A/B/C inputs oers a four th internal input signal

Free ULTRADRIVE PRO sof tware enables total control via PC through RS -232 and RS-4 85 interfaces (download at behringer.com)

Link option via RS-485 network interface enables cascading of s everal ULTRADRIVE PROs

60 user-dened internal presets s torable via PC soft ware or on PCMCIA card

Servo-balanced, gold-plated XLR connectors for all inputs and outputs

Internal switch-mode power supply for maximum exibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving

High-quality components and exceptionally rugged construction ensure long life

Conceived and designed by BEHRINGER Germany

Specications

Audio Input

Microphone

Connectors XLR

Type transformerless, D C-decoupled inp ut

Impedance 3 k Ohms balanced

Maximum input level +10 dBu balanced and unbalanced

CMRR typ. 40 dB, >55 dB @ 1 kHz

Line

Connectors XLR and ¼" jack

Type transformerless, D C-decoupled inp ut

Impedance 60 kOhms balanced

Maximum input level +23 dBu balanced and unbalanced

CMRR typ. 40 dB, >55 dB @ 1kHz

Audio Output

Connectors XLR and ¼" jack

Type electronically ser vo-balanced

outputst age

Impedance 60 Ohms balanced,

30 Ohms unbalance d

Maximum out put level +21 dBu balanced and unbalanced

System Specications

Frequency response 10 Hz to 200 kHz, +/- 3 dB

Noise >94 dBu, unweighted,

22 Hz to 22 kHz

THD 0.011% typ. @ +4 dBu, 1 kHz, Gain 1

IMD 0.01% typ. SMPTE

Crosstalk <-88 dB, 22 Hz to 22 kHz