Behringer BO300 User Manual
BLUES OVERDRIVE BO300
Classic Ov erdrive Eect s Pedal
Thank you for show ing your condence in us by purch asing the BEHRINGER BLUES OVERDRIVE BO300.
This classic e ects pedal is spe cically designed to del iver the warm and emotive dis tortion usually known
from 30-ye ar-old class ic tube amps. Thanks to it s high-perform ance features you will achie ve the tone of a
vintage and b luesy tube amp that capt ures every nuance of your play ing. And if you feel like it, you ca n rock
out with full-blast distortion.
1. Controls
(4)
(1)
(2)
(3)
(7)
(6)
(5)
(1) The LEVEL control adjusts the output level.
(2) The TONE control adds tube-like warmth to the overall sound.
(3) Use the GAIN control to adjust the amount of overdrive.
(4) The ON /BATT LED illuminates when the eect is activated. It also ser ves as a battery
level indicator.
(5) Use the footswitch to activate/deactivate the eec t.
(6) Use this ¼" TS IN connector to plug in the instrument cable.
(7) The ¼" TS OUT connector sends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery
(not included), press the hinges with a b allpoint pen and remove the pedal cover. Be careful not to
scratch the unit.
◊ The BO300 has no on/o switch. As soon as you insert the jack into the in connector,
the BO300 begins running. When not using the BO300, remove the jack from the in
connec tor. This extends the life of the battery.
The SERIAL NUMBER is located at the bottom.
BLUES OVERDRIVE BO300
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories.
Do not service product yourself. Contact our qualied servicing personnel for servicing or repair s,
especially w hen power supply cord or plug is damaged.
3. Warranty
Please regis ter your new BEHRINGER equipment right after your purchase by visiting
http://behringer.com and read the terms and conditions of our warranty c arefully.
4. Specications
In
Connec tor ¼" TS
Impedanc e 500 kΩ
Out
Connec tor ¼" TS
Impedanc e 1 kΩ
Power Supply
9 V𝌂, 100 mA regulated
BEHRINGER PSU-SB
USA/Canad a 120 V~, 60 Hz
China/Ko rea 220 V~, 50 Hz
U.K./Austra lia 240 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 – 60 Hz
Power connec tor 2 mm DC jack, n egative center
Batter y 9 V type 6LR 61
Power consumption 30 mA
Physical/Weight
Dimensio ns approx. 2 ⁄ x 2 ¾ x 4 ⁄"
(H x W x D) appro x. 54 x 70 x 123 mm
Weight app rox. 0.73 lbs / 0.33 kg
BEHRING ER is constant ly striving to m aintain the
highes t profession al standards. A s a result of the se effor ts,
modifi cations may be m ade from time to t ime to existi ng
produc ts without p rior notice. Sp ecificat ions and appear ance
may there fore diffe r from those li sted or shown.
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE
MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS
WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.
COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS
ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR
IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM
OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS
WRITTEN PERMISSION OF MUSICGROUPIPLTD. ALL RIGHTS RESERVED. © 2012 MUSICGroupIPLtd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands
Loading...