Behringer BLE100 User Manual

BASS LIMITER ENHANCER BLE100
Thank you for showing your confidence in us by purchasing the BEHRINGER BASS LIMITER ENHANCER BLE100. This ultimate effects pedal is specifically designed to smoothen harsh volume peaks when using dynamic slaps or other playing styles. Thanks to its high-performance features you get full dynamics and tone control for absolute flexibility and limitless creative options.
A limiter reduces the dynamic range of a signal. This means that signal peaks will be attenuated and the level differences between loudest and softest playing are reduced. This results in a more powerful and pressure-rich tone. The loss of high frequencies due to compression can be compensated by using an enhancer that adds high-frequency harmonics to the sound.
1. CONTROLS
Top view
The LEVEL control adjusts the output level.
Turn up the ENHANCE control to achieve more presence and bass clarity.
The RATIO control determines the amount of compression when the chosen threshold (see below) value is exceeded.
Use the THRESH(old) control to define a level threshold. When this value is exceeded by the input signal, the BLE100 starts limiting with the chosen amount of ratio.
The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4" TS IN connector to plug in the instrument cable.
The 1/4" TS OUT connector sends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
BASS LIMITER ENHANCER BLE100
+ The BLE100 has no on/off switch. As soon as you insert the jack into the IN
connector, the BLE100 begins running. When not using the BLE100, remove the jack from the IN connector. This extends the life of the battery.
The SERIAL NUMBER is located at the bottom.
2. WARRANTY
For our current warranty terms, please refer to our website at http:// www.behringer.com.
3. SPECIFICATIONS
In
Connector 1/4" TS Impedance 500 kW
Out
Connector 1/4" TS Impedance 1 kW
Power supply 9 V, 100 mA DC regulated
Power connector 2 mm DC jack, negative center Battery 9 V type 6LR61 Power consumption 30 mA Dimensions (H x W x D) approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5") Weight approx. 0.33 kg (0.73 lbs)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.
PSU-SB-CN BEHRINGER 220 VAC adaptor China PSU-SB-EU BEHRINGER 230 VAC adaptor Europe PSU-SB-JP BEHRINGER 100 VAC adaptor Japan PSU-SB-SAA BEHRINGER 240 VAC adaptor Australia PSU-SB-UK BEHRINGER 240 VAC adaptor UK PSU-SB-UL BEHRINGER 115 VAC adaptor USA
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself.
4. SAFETY INSTRUCTIONS
Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.
No utilizar cerca de agua o instalar cerca de fuentes de calor. Utilice sólo accesorios y aditamentos autorizados. No intenté reparar el producto usted mismo. Contacte a nuestro personal técnico cualificado para servicio y reparaciones, especialmente cuando la
fuente o el cable de alimentación estén dañados.
Íå эксплуатируйте прибор вблизи îò источниковâîäû è тепла. Применяйте только авторизованные дополнительные óстройства.Íèêîãäàíå ремонтирóéòå приборсамостоятельно. Ðемонтìîæåò произвоäèòü òîëüêîквалифицированный специализированныйперсонал,
Die deutsche Anleitung ist erhältlich @ www.behringer.com Manuel francophone en téléchargement sur www.behringer.com Manual en español disponible en www.behringer.com Manuali italiani disponibili @ www.behringer.com
Ðóññêоязычноеðóêîâîдство@www.behringer.com
Polskainstrukcjadostêpnajestpodadresem@www.behringer.com
Nederlandse handleiding beschikbaar @ www.behringer.com Suomenkielinen käyttöohje saatavilla osoitteesta www.behringer.com Svensk manual finns tillgänglig på www.behringer.com Dansk vejledning findes på @ www.behringer.com Manual português disponível @ www.behringer.com
Еллзнйкь егчейсЯдйп хрЬсчей дйбиЭуймп уфз дйеэихнуз www.behringer.com
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER® nor affiliation of the trademark owners with BEHRINGER®. BEHRINGER® accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER® and have absolutely no authority to bind BEHRINGER® by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered trademark. ALL RIGHTS RESERVED. © 2005 BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany. Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
особенноïðèповреждениях сетевогопровода èëèсетевойвилки.
Loading...