Behringer B912NEO, B815NEO, B812NEO User Manual

Professional Powered Speakers
EUROLIVE B912NEO B815NEO/B812NEO
DSP-Controlled 1,200-Watt 12"/15"/12" PA Speaker System with Neodymium Speakers and Integrated Mixer
High-power 1,200-Watt 2-way PA sound reinforcement speaker system with integrated mixer for live and playback applications
Ultra-compact and light weight plastic composite material provides excellent sound even at extreme sound pressure levels:
B812NEO weighs only 19 kg/41 lbs
B815NEO weighs only 23 kg/51 lbs
B912NEO weighs only 19 kg/41 lbs
Extremely powerful and light weight 12"/15"/12" neodymium woofer provides incredibly deep bass and acoustic power
Revolutionary Class-D ampli er technology: enormous power, incredible sonic performance
State-of-the-art 24-bit digital signal processor for ultimate system control:
Digital crossover, phase and time correction for perfect driver alignment plus dual compressor/ limiter for total system protection
Digital noise gate, low-cut  lter, 2-band EQ, dynamic Contour  lter for ultimate sound reproduction
Our EUROLIVE 1,200-Watt NEO Series active loudspeakers are destined to become the new standard in high-quality live sound reproduction. Packed with 1,200 Watts of biamped Class-D output and SMPS (Switch-Mode Power Supplies), these brutes provide massive low-end punch, with the kind of high- delity de nition and clarity typically reserved for much larger systems. NEO Series loudspeakers provide the best power­to-weight ratio of any speaker system we’ve created to date!
Class-D Works its Magic
What’s the secret? These state-of-the­art active loudspeakers are powered by custom-engineered Class-D ampli ers,
which drive the low- and high-frequency transducers to their limits without even the slightest hint of distortion. Best of all, our Class-D ampli ers use SMPS (Switch-Mode Power Supplies), which don’t need massive transformers and heat sinks, making the NEO Series ultracompact and highly-e cient.
Put simply, these cool-running systems provide more Watts per pound, making them easy to transport and set up. Our no-compromise design means you get solid punchy bass, along with powerful mids and pristine highs that will keep the party going all night long.
Continued on next page
2 Mic/Line inputs (XLR and ¼" TRS) with individual volume controls and peak LEDs
State-of-the-art 1.75" ragm neodymium compression driver for exceptional high-frequency reproduction
EUROLIVE B912NEO B815NEO B812NEO
Ultra-wide dispersion and large format exponential/conical horn with multi-cell aperture throat
Additional Line output enables linking of additional speaker systems
Versatile trapezoidal enclosure design allows di erent positioning:
Stand mounting with 35-mm/1.378" pole socket
Tilts on its side for use as a  oor monitor
Ergonomically shaped handles for easy carrying and setup
Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
NEO-What?
Since its discovery in the 1800s, scientists have been playing with neodymium, a rare-earth element prized for its powerful magnetic properties and super-light weight. Our engineers have harnessed the power of neodymium, creating some of the best-sounding, featherweight transducers (woofers and tweeters) known to man.
Custom-Designed Transducers
Let’s face it; the transducer (speaker) is the only part of a sound system you actually hear, so we don’t cut any corners. While some of our competitors are content to grab whatever they have on hand and plug them into their boxes, we build our transducers from scratch. Not only do we wind our own voice coils, we process the paper pulp into cones and even machine the frames and back plates. This enables us to control the quality, and frankly, make better components— like the neodymium woofers and
1.75" neodymium titanium-diaphragm compression drivers we deploy in each and every NEO Series loudspeaker.
More than a year went into the creation of the multi-cell aperture horn/neodymium titanium-diaphragm driver combination that not only does justice to loud rock and dance music, but also satis es audiophiles with its
Page 2 of 8
musical timbre and attention to detail. The resulting HF horn dispersion pattern ensures that everyone in the performance area hears the same high-quality sound. No corners cut here!
Digital Signal Processing
From the instant the signal enters the NEO system, the digital processor takes over, ensuring the highest possible signal integrity—and we’re talking CLEAN! The 24-bit DSP (Digital Signal Processor) includes a digital crossover, phase and time-optimization for perfect driver alignment, and a dual compressor/limiter for total system protection. Two-band EQ (HIGH and LOW) is provided for  netuning system response, along with an adjustable LOW CUT  lter, a switchable dynamic Contour  lter (SPEECH or MUSIC) and a digital NOISE GATE with Threshold LED.
Power to Spare
Cutting-edge technology and high  delity transducers are not all it takes to get your message across—you need power, and lots of it. At the heart of each of these systems is a biamped 1,200-Watt engine capable of driving the speakers to their very limit, without the slightest hint of distortion. When it comes to pure output power, NEO Series loudspeakers will simply blow you away with their massive punch, smooth mids and articulate top-end!
Continued on next page
EUROLIVE B912NEO B815NEO B812NEO
Instant PA System
With just a single NEO loudspeaker system and one or two dynamic microphones, you can set up an instant sound system. The onboard mixer features a LEVEL control for each input and a dual-band master EQ, complete with an adjustable Low Cut  lter to help eliminate annoying breath pops and mic handling noise. An additional  lter, which we call Contour, allows you to select Speech (for enhanced voice intelligibility), or Music for the broader frequency range required for the high­ delity reproduction of music. And if you need more coverage, you can chain together as many as you like via the convenient LINE OUT XLR connector.
Low Frequency Response
The EUROLIVE NEO Series was built with extended low frequency handling in mind. Thanks to a tuned port, internally braced, injection-molded enclosure, each model’s custom-designed LF (Low Frequency) transducer really cranks out tight bottom end. Keep in mind that bass response varies according to LF transducer size, so the larger the speaker, the more bass you will be able to generate.
First, let’s establish one thing—both models put out plenty of bass. But physics are physics and a 15" low frequency transducer has almost 40% more surface area with which to move air than a 12". So with a 15" loudspeaker, you can move more air with the same amount of power and generate more bass.
If you’re amplifying a sales presentation with a single mic in the boardroom, or an acoustic guitar at the co ee house, the B812NEO or B912NEO will probably be all the speaker system you’ll ever need. But if your music has more bass in it —
Ultra-compact, lightweight composite enclosure
Page 3 of 8
or you want to crank it up louder, then the B815NEO may be a better choice. Up to a point…
The larger a room’s cubic volume, the more energy is required to achieve any given desired level of bass. In other words, when playing the same music in a big room versus a small room, big room = less bass; small room = more bass. For really large performances or venues, you may  nd that you will need to add subwoofers to your setup to achieve the desired level of bass impact. But more on that later…
Continued on next page
1.75" titanium­diaphragm neodymium compression driver
Power LED
Why Are There Two 12" Versions in the Neo Series?
From a technical and functional aspect, the B812NEO and B912NEO are identical. They have exactly the same ampli ers, transducers, DSP, frequency response and basic construction. The B912NEO is designed for applications where a more conservative appearance may be desired, such as in churches, restaurants, businesses, etc.
Which One Do I Need, the 12" or 15"?
As you’ve probably noticed, we make these in two woofer sizes. Which one is right for your application? Well, let’s start with your application:
Is it spoken word in a hotel ballroom?
Hard rock in a park? A folk singer or a drum ‘n’ bass act? Loud enough for an 18-year old, or loud enough for your grandmother? Is your venue a huge auditorium or a tiny club?
Ergonomic carry handles on both sides
Rubber feet
Lightweight neodymium LF driver
Standard pole socket 35 mm/1.378" (on bottom)
EUROLIVE B912NEO B815NEO B812NEO
More Than Just a PA Loudspeaker...
When laid on their side, NEO Series loudspeakers tilt to the ideal angle for onstage monitor wedge applications. Hookup is simple, requiring only a single cable from the monitor send on the mixing console and, of course, power. Additional monitors can be chained together via the XLR LINE OUT jack on the loudspeaker’s rear panel.
NEO Series loudspeakers also make excellent onstage monitors for keyboards, acoustic guitars, or any line-level instrument for that matter. You can plug your instrument into MIC/LINE 1 and use the
MIC/LINE 2 input to connect the monitor signal from the PA mixing console, so that you can also hear the other members of your band. This opens up lots of possibilities. If you want to use more than two instruments, you will need a submixer (e.g. XENYX X1204USB) to mix down the signals to one feed.
Conservation of Energy
Because of the NEO Series’ high-e ciency Class-D ampli er and switch-mode power supply technology, these loudspeakers waste less energy than conventional active systems, putting out more sound and generating signi cantly less heat! For even more energy conservation, each NEO loudspeaker has a handy Timed
Page 4 of 8
Cuto switch that puts the system into standby mode when no signal is detected for more than three (3) minutes.
Value
When it comes to serious bang for your buck, it’s hard to beat the NEO Series—and the sound quality is second to none! Stop by your BEHRINGER dealer today, compare them to the competition and  nd out how easy it is to take home a pair.
For a rump-shaking romp into sonic wonderland, team up a pair of NEO Series loudspeakers with our amazing new active subwoofers, the B1500D-PRO or B1800DPRO. Be sure to check with local authorities to make sure you’re nowhere near a seismic fault. These babies really rock!
CONTOUR switch toggles between SPEECH and MUSIC
Power switch
HIGH­frequency EQ
LOW­frequency EQ
Adjustable LOW-CUT  lter
Input 2 LEVEL control w/ CLIP LED
Input 1 LEVEL control w/ CLIP LED
IEC power socket
TIMED TURNOFF switch
Adjustable NOISE GATE w/ Threshold LED
LINE OUT for linking additional systems
MIC/LINE 2 input
MIC/LINE 1 input
EUROLIVE B912NEO B815NEO B812NEO
Page 5 of 8
Stereo PA with external mixer
Connecting multiple NEO systems
EUROLIVE
Page 6 of 8
B912NEO B815NEO B812NEO
Presentation with one microphone + music or PowerPoint sound e ects
EUROLIVE B812NEO
XM8500
Mic/Line 2 with adaptor
MP3 Player
Mic/Line 1
or
Laptop Computer
XM8500
Stereo operation with external mixer
EUROLIVE B812NEO
Mic Input
XENYX X2442USB
Main Out L
Main Out R
EUROLIVE B912NEO B815NEO B812NEO
Page 7 of 8
Connecting additional B12NEO loudspeakers
EUROLIVE B812NEO
Rear
Line Out
Mic / Line In
Main Out L
Rear
Mic / Line In
Line Out
Mic / Line 1Mic / Line 1
Main Out R
XENYX X2442USB
EUROLIVE B912NEO B815NEO B812NEO
Page 8 of 8
B912NEO/B812NEO
OUTPUT POWER
Low-frequency range
RMS @ 1% THD 800 W @ 8 Ω
Peak power 1200 W @ 8 Ω
High-frequency range
RMS @ 1% THD 50 W @ 8 Ω
Peak power 60 W @ 8 Ω
AUDIO INPUTS
XLR (servo-balanced) Channels 1 and 2
Sensitivity -40 dBu to +10 dBu
Input impedance 27 kΩ
Level control Channels 1 and 2
Input Trim –∞ to + 50 dB
Max. input level +22 dBu
B815NEO
OUTPUT POWER
Low-frequency range
RMS @ 1% THD 800 W @ 8 Ω
Peak power 1200 W @ 8 Ω
High-frequency range
RMS @ 1% THD 50 W @ 8 Ω
Peak power 60 W @ 8 Ω
AUDIO INPUTS
XLR (servo-balanced) Channels 1 and 2
Sensitivity -40 dBu to +10 dBu
Input impedance 27 kΩ
Level control Channels 1 and 2
Input Trim –∞ to + 50 dB
Max. input level +22 dBu
AUDIO OUTPUTS
LINE OUT XLR, balanced
Output impedance 120 Ω
AUDIO OUTPUTS
LINE OUT XLR, balanced
Output impedance 120 Ω
CONTROLS
Digital Signal Processor 24-bit  xed-point Motorola
AD/DA converter 24-bit / 48 kHz
NOISE GATE variable (o to -30 dB < -45 dB)
TIMED TURNOFF switchable (3 min.)
CONTOUR switchable SPEECH / MUSIC contour
HIGH 12 kHz / ±15 dB
LOW 80 Hz / ±15 dB
LOW CUT hi-pass  lter, 40 - 160 Hz (24 dB / Oct.)
LOUDSPEAKER SYSTEM DATA
Frequency response 45 Hz to 20 kHz
Crossover frequency 1.54 kHz
Sound pressure level max. 127 dB SPL @ 1 m
Tweeter 1.75" / 44 mm, neodymium titanium-diaphragm HF driver
CONTROLS
Digital Signal Processor 24-bit  xed-point Motorola
AD/DA converter 24-bit / 48 kHz
NOISE GATE variable (o to -30 dB < -45 dB)
TIMED TURNOFF switchable (3 min.)
CONTOUR switchable SPEECH / MUSIC contour
HIGH 12 kHz / ±15 dB
LOW 80 Hz / ±15 dB
LOW CUT hi-pass  lter, 40 - 160 Hz (24 dB / Oct.)
LOUDSPEAKER SYSTEM DATA
Frequency response 40 Hz to 20 kHz
Crossover frequency 1.54 kHz
Sound pressure level max. 128 dB SPL @ 1 m
Tweeter 1.75" / 44 mm, neodymium titanium-diaphragm HF driver
Woofer 15" / 387 mm neodymium LF transducer
Limiter Optical, dual protection for woofer and driver
Dynamic equalizer Processor-controlled, dual parametric EQs
Woofer 12" / 308 mm neodymium LF transducer
Limiter Optical, dual protection for woofer and driver
Dynamic equalizer Processor-controlled, dual parametric EQs
POWER SUPPLY / VOLTAGE FUSES
USA / Canada 120 V~, 60 Hz (T 10 A H 250 V)
UK / Australia 240 V~, 50 Hz (T 5.0 A H 250 V)
Europe 230 V~, 50 Hz (T 5.0 A H 250 V)
Japan 100 V~, 50-60 Hz (T 10 A H 250 V)
Power consumption max. 1000 Watts
Mains connection Standard IEC connector
DIMENSIONS/WEIGHT
Dimensions (HxWxD) 26 x 15 x 15.5"/660 x 380 x 395 mm
Weight 42 lbs/19 kg
POWER SUPPLY / VOLTAGE FUSES
USA / Canada 120 V~, 60 Hz (T 10 A H 250 V)
UK / Australia 240 V~, 50 Hz (T 5.0 A H 250 V)
Europe 230 V~, 50 Hz (T 5.0 A H 250 V)
Japan 100 V~, 50-60 Hz (T 10 A H 250 V)
Power consumption max. 1000 Watts
Mains connection Standard IEC connector
DIMENSIONS/WEIGHT
Dimensions (HxWxD) 29 x 17 x 18.5"/735 x 430 x 470 mm
Weight 51.1 lbs/23.18 kg
Please note these speci cations are preliminary and conceptual in nature, and as such are subject to change as product development progresses. This information is supplied for market research purposes only and is not to be made public in any manner. This document is solely the property of The MUSIC Group, or one of its subsidiaries, and must be surrendered upon request of the owner.
For service, support or more information contact the BEHRINGER location nearest you:
Europe Tel.: +49 2154 9206 4149 Fax: +49 2154 9206 4199 USA/Canada Tel.: +1 425 672 0816 Fax: +1 425 673 7647
©2011 Red Chip Company Ltd. Technical specifi cations and appearance subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. BEHRINGER accepts no liability for any loss which may be suff ered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. 985-10000-00456
Singapore Tel.: +65 6845 1800 Fax: +65 6214 0275 Australia Tel.: +61 03 9877 7170 Fax: +61 03 9877 7870
Japan Tel.: +81 3 5281 1180 Fax: +81 3 5281 1181
Loading...