This manual is available in English, German, French,
Spanish, Italian, Russian, Polish, Dutch, Finnish, Swedish,
Danish, Portugese, Greek, Japanese and Chinese. There may
also be more current versions of this document. Download them
by going to the appropriate product page at:
www.behringer.com
A50-78913-00004
ENGLISH
EUROLIVE B312A/B315A User Manual
2
Important Safety Instructions
*
This symbol, wherever it appears, alerts you to the presence
of uninsulated dangerous voltage inside the enclosure voltage that may be sucient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important
operating and maintenance instructions in the
accompanying literature. Please read the manual.
To reduce the risk of electric shock, do not remove the top
◊
cover (or the rear section). No user serviceable parts inside.
Refer servicing to qualied personnel.
To reduce the risk of re or electric shock, do not expose
◊
this appliance to rain and moisture. The apparatus shall
not be exposed to dripping or splashing liquids and no
objects lled with liquids, such as vases, shall be placed on
the apparatus.
These service instructions are for use by qualied service
◊
personnel only. To reduce the risk of electric shock do not
perform any servicing other than that contained in the
operation instructions. Repairs have to be performed by
qualied service personnel.
Caution
Caution
!
Caution
!
Caution
!
Read these instructions.
{1}.
Keep these instructions.
{2}.
Heed all warnings.
{3}.
Follow all instructions.
{4}.
Do not use this apparatus near water.
{5}.
Clean only with dry cloth.
{6}.
Do not block any ventilation openings. Install in accordance with the
{7}.
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves,
{8}.
or other apparatus (including ampliers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
{9}.
polarized plug has two blades with one wider than the other. A groundingtype plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not t into
your outlet, consult an electrician for replacement of the obsolete outlet.
Place the power cord so that it is protected from being walked on and sharp
[10].
edges. Be sure that the power cord is protected particularly at plugs,
convenience receptacles and the point where it exits from the apparatus.
Use only attachments/accessories specied by the manufacturer.
[11].
Use only with the cart, stand, tripod, bracket,
[12].
or table specied by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms
[13].
or when unused for long periods of time.
Refer all servicing to qualied service personnel. Servicing is required when
[14].
the apparatus has been damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
The apparatus shall be connected to a MAINS socket outlet with a protective
[15].
earthing connection.
Where the MAINS plug or an appliance coupler is used as the disconnect
[16].
device, the disconnect device shall remain readily operable.
ENGLISH
EUROLIVE B312A/B315A User Manual
3
Before You Get Started1.
Please register your new BEHRINGER equipment right after
Shipment1.1
Your product was carefully packed at the factory to ensure safe
transport. Nevertheless, if the box is damaged inspect the unit
immediately for signs of damage.
If the unit is damaged please do NOT return it to us, but notify your dealer
and the shipping company immediately; otherwise, claims for damage or
replacement may not be granted.
Always use the original box to prevent damage during
◊
storage or transport.
Make sure that children cannot play unsupervised with the
◊
unit or its packaging.
Please ensure proper disposal of all packing materials.
◊
Initial operation1.2
Ensure adequate air supply and to avoid overheating do not
place the unit near radiators etc.
Blown fuses must be replaced by fuses of the correct rating!
◊
Please refer to the “Specications” section for the
applicable rating.
For connection to the mains use the enclosed power cord with
cold connector which complies with the relevant safety
regulations.
Please make sure that all devices are properly grounded.
◊
For your own safety, never remove or disable the ground
conductors from the devices or on the power cords. The
unit must always be connected to the mains outlet with a
protective grounding connection.
your purchase by visiting http://www.behringer.com and read
the terms and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, it is our
intention to have it repaired as quickly as possible. To arrange
for warranty service, please contact the BEHRINGER retailer
from whom the equipment was purchased. Should your
BEHRINGER dealer not be located in your vicinity, you may
directly contact one of our subsidiaries. Corresponding contact
information is included in the original equipment packaging
(Global Contact Information/European Contact Information).
Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support
area of our website (http://www.behringer.com).
Registering your purchase and equipment with us helps us
process your repair claims more quickly and efciently.
Connections
Online registration1.3
Thank you for your cooperation!
Control Elements and 2.
Caution
!
This loudspeaker is capable of producing extreme volumes.
◊
Please keep in mind that high sound pressures do not only
temporarily damage your sense of hearing, but can also
cause permanent hearing damage. Be careful to select a
suitable volume at all times.
Important notes concerning installation
The sound quality may diminish within the range of
◊
powerful broadcasting stations and high-frequency sources.
Increase the distance between the transmitter and the
device and use shielded cables for all connections.
Fig.2.1: Control elements and connections (B312A and B315A)
Use this ¼" stereo jack to connect a signal source that has
[1]
¼" output.
Use this XLR connector to connect a signal source that has
[2]
XLR output.
Always use either the XLR or the ¼" jack input, and use the
◊
LEVEL control {4} to adapt the input sensitivity. Never use
both inputs at the same time!
Loading...
+ 5 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.