BECKHOFF ZK7000-0303-6003, ZK7000-0303-6005, ZK7000-0303-6010, ZK7000-0303-6015, ZK7000-0303-6020 Product information

Revision 1.3

ZK7000-0303-6xxx | EtherCAT P cable, AWG 22, PUR,
capable of torsion

M8, plug, angled, male, 4-pin, P-coded – M8, plug, angled, male, 4-pin, P-coded

Plugs

Electrical data Head A Head B

Rated voltage 24 V DC (according to IEC 61076-2-104) 24 V DC (according to IEC 61076-2-104)
Rated current 3 A at 40 °C (according to IEC 61076-2-104) 3 A at 40 °C (according to IEC 61076-2-104)
Shielding yes yes
Insulation resistance ≥ 100 GΩ (according to IEC 60512) ≥ 100 GΩ (according to IEC 60512)

Mechanical data

Installation size M8 M8
Connector type plug plug
Configuration angled angled
Contact type male male
Number of positions (face) 4-pin 4-pin
Coding P-coded P-coded
Recommended torque, nut 0.4 Nm 0.4 Nm
Mating cycles ≥ 100 ≥ 100
Way of locking screw screw
Body colour black black
Body material TPU, UL 94 TPU, UL 94
Coupling nut material CuZn, Ni CuZn, Ni
Seal FPM FPM
Contact carrier colour red red
Contact carrier material PA, UL 94 PA, UL 94
Contact plating Ni, Au gal. Ni, Au gal.
Contact material CuZn CuZn

Environmental data

UV resistance yes yes
RoHS compliant yes yes
Ambient temperature (operation) -40...+85 °C, -40...+185 °F -40...+85 °C, -40...+185 °F
Protection class IP 65/67 in screwed condition (according to IEC 60529) IP 65/67 in screwed condition (according to IEC 60529)
Pollution level 3/2 (according to IEC 60664-1) 3/2 (according to IEC 60664-1)

Revision 1.3

Revision 1.3

BECKHOFF New Automation Technology

Page 1 of 4

We reserve the right to make technical changes.

Cable

Electrical data

Rated voltage 30 V
Insulation resistance ≥ 5GW * km
Unbalanced capacitance to ground 48 nF/km
Mutual capacitance 48 nF/km
Characteristic impedance

(Ethernet)

100 W ±15 W

Loop resistance ≤ 115 Ω/km
Dielectric strength wire/wire

(Ethernet)

1.5 kV ( 50 Hz, 1 min)

Dielectric strength wire/shield
(Ethernet)

1.5 kV ( 50 Hz, 1 min)

Electrical parameters (Ethernet) based on CAT 5
Test voltage 1500 V, 50 Hz, 1 min.

Mechanical data

Cable structure (Ethernet) star quad
Conductor construction (Ethernet) 19-strand
Cross section (Ethernet) 1 x 4 x 0.34 mm² (AWG 22)
Min. bending radius, moved 8 x outer cable diameter
Min. bending radius, moved in

drag chain

8 x outher cable diameter

Outer cable diameter 6.3 mm ± 0.2 mm (0.248" ± 0.0079")
Conductor material (Ethernet) copper, tinned
Shielding aluminium-clad foil, braiding of tinned copper wires, coupling
Optical covering factor of

shielding (Ethernet)

≥ 85 %

Use suitable for torsion/robotic application
Jacket colour black (similar to RAL 9005) with red stripe (similar to RAL 3020)
Material jacket PUR (polyurethane)
Material jacket, further

characteristics of

halogen-free, flame-retardant, matt and low adhesion

Wire colour code yellow, orange, white, blue
Wire insulation material PO (Polyolefine)
Printing on the jacket XXXX Beckhoff Automation GmbH & Co. KG – Germany – ZB7004 EtherCAT Cat5e Torsion AWG22/19 E170315 AWM

20963 AWM I/II A/B 80°C 30V

Printing colour white
Torsion angle in °/m max. ± 180°/m
Torsion speed 36 cycle/min.
Number of torsion cycles 5 million
Load weight 20 N
Claimed torsion length 1 m

Environmental data

Operation temperature range,
moved

-30…+70 °C, -22…+158 °F

Oil resistance according to DIN EN 60811-404 (7x24 h/90 °C)
Flame-retardant VW-1 Flame Test UL 1581 section 1080 and IEC 60332-1-2
Halogen-free according to IEC 60754 respectively DIN VDE 0472 part 815
Approvals c(UL)us AWM Style 20963

Attenuation

Max. insertion loss
Frequency [MHz] 1 4 10 16 20 31.25 62.5 100
[db/100 m] - 4.9 7.8 9.9 11.1 14.1 62.5 26.4
[db/100 ft] - 1.5 2.4 3 3.4 4.3 19.1 8
Min. near-end crosstalk attenuation
Frequency [MHz] 1 4 10 16 20 31.25 62.5 100
[db/100 m] - 56.3 50.3 47.2 45.8 42.9 38.4 35.3
[db/100 ft] - 17.2 15.3 14.4 14 13.1 11.7 10.8

BECKHOFF New Automation Technology

Page 2 of 4

We reserve the right to make technical changes.