Beckhoff ZK2000-3132 Installation Manual
Revision 2.2
ZK2000-3132-3xxx | Sensor cable, PVC, 4 x 0.25 mm², fixed
installation
M8, plug, straight, male, 4-pin, A-coded – M8, socket, straight, female, 4-pin, A-coded
Plugs
Electrical data Head A Head B
Rated voltage 30 V (according to IEC 61076-2-104) 30 V (according to IEC 61076-2-104)
Rated current 4 A at 40 °C (according to IEC 61076-2-104) 4 A at 40 °C (according to IEC 61076-2-104)
Shielding no no
Insulation resistance ≥ 10 GΩ (according to IEC 60512-2) ≥ 10 GΩ (according to IEC 60512-2)
Mechanical data
Installation size M8 M8
Connector type plug socket
Configuration straight straight
Contact type male female
Number of positions (face) 4-pin 4-pin
Coding A-coded A-coded
Recommended torque, nut 0.4 Nm 0.4 Nm
Mating cycles ≥ 100 (according to IEC 60512-9a) ≥ 100 (according to IEC 60512-9a)
Way of locking screw screw
Weight per piece 0.028 kg (0.0617 lb) 0.028 kg (0.0617 lb)
Body colour black black
Body material TPU, UL94 TPU, UL94
Coupling nut material CuZn, Ni CuZn, Ni
Seal FPM FPM
Contact carrier colour red red
Contact carrier material TPU GF, UL 94 TPU GF, UL 94
Contact plating Ni, Au gal. Ni, Au gal.
Contact material CuZn CuZn
Environmental data
Special features halogen-free, flame-resistant as per IEC 60332-1-2,
oil-resistant as per DIN EN 60811-2-1
halogen-free, flame-resistant as per IEC 60332-1-2,
oil-resistant as per DIN EN 60811-2-1
RoHS compliant yes yes
Ambient temperature (operation) -30...+80 °C, -22...+176 °F -30...+80 °C, -22...+176 °F
Revision 2.2
Revision 2.2
BECKHOFF New Automation Technology
Page 1 of 3
We reserve the right to make technical changes.
Protection class IP 65/67 in screwed condition (according to IEC 60529) IP 65/67 in screwed condition (according to IEC 60529)
Pollution level 3/2 (according to IEC 60664-1) 3/2 (according to IEC 60664-1)
Cable
Electrical data
Rated voltage ≤ 300 V
Insulation resistance ≥ 10 GΩ (according to IEC 60512-2)
Wire resistance (signal/24V)
≤ 58.0 W/km (20 °C)
Test voltage ≥ 3000 V
Mechanical data
Conductor construction
(signal/24V)
32 x 0.10 mm
Cross section 4 x 0.25 mm² (AWG24)
Min. bending radius, fixed
installation
5 x outer cable diameter
Weight 33.45 kg/km (22.5 lb/1000 ft)
Outer cable diameter 4.7 mm ± 0.15 mm (0.185" ± 0.0059")
Shielding no
Use fixed installation
Jacket colour grey
Material jacket PVC (polyvinyl chloride)
Wire colour code white, blue, black, brown
Wire insulation material PVC (polyvinyl chloride)
Printing colour white
Environmental data
Operation temperature range,
fixed installation
-25…+80 °C, -13…+176 °F
Flame-retardant according to DIN EN 60332-2-2
Halogen-free no
Contact assembly
Dimensions
A1 39.60 mm
B1 33.00 mm
Notes
- Depending on the cable length (L), the following length tolerances apply:
0 m…<0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %
- Illustrations similar
BECKHOFF New Automation Technology
Page 2 of 3
We reserve the right to make technical changes.
Loading...