BECKHOFF ELX3204-0090 User Manual

Analog input

ELX3204-0090

Error LED 4

Error LED 3

Error LED 2

Error LED 1

Run LED

Power contact
+24 V EX

Power contact
0 V EX

+R1

+R2

+R3

+R4

-R1

-R2

-R3

-R4

Top view

ELX3204-0090 | 4-channel analog input terminal RTD,
2-wire connection, 16 bit, Ex i, TwinSAFE SC

The ELX3204-0090 analog input terminal allows the direct connection of RTDs located in hazardous areas classified Zone 0/20 or 1/21. The
circuitry of the ELX3204-0090 can operate sensors with 2-wire technology. Linearisation is carried out over the entire freely selectable
temperature range. By default the terminal is set to PT100 sensors with 2-wire technology. The ELX3204-0090 terminal indicates signal state
and sensor malfunctions (e.g. wire breakage) by means of LEDs.

With the aid of the TwinSAFE SC technology (TwinSAFE Single Channel) it is possible to make use of standard signals for safety tasks in any network or
fieldbus. To do this, EtherCAT I/Os from the areas of analog input, position measurement or communication (4…20mA, incremental encoder, IO-Link,
etc.) are extended by the TwinSAFE SC function. The properties typical for the signals and the standard functions of the I/O components are retained.
TwinSAFE SC I/Os differ optically from standard I/Os by a yellow stripe on the front of the housing.

The TwinSAFE SC technology enables communication via a TwinSAFE protocol. These connections can be distinguished from the usual secure
communication via Safety over EtherCAT.

The data from the TwinSAFE SC components is fed via a TwinSAFE protocol to the TwinSAFE Logic, where it can be used in the context of safety-relevant
applications. Detailed examples confirmed/calculated by the TÜV SÜD for the correct application of the TwinSAFE SC components and the respective
normative classifications can be found in the TwinSAFE application manual.

Technical data ELX3204-0090

Number of inputs 4 (differential)
Power supply via the E-bus
Connection method 2-wire
Temperature range -200…+850 °C (PT sensors); -60…+250 °C (Ni sensors), for further types and details see documentation
Resolution up to 0.01 °C per digit (preset: 0.1 °C per digit)
Measuring current < 1 mA (depending on sensor and measuring range)
Measuring error < ±0.3 % (relative to full scale value)
Internal resistance typ. ≥ 10 kΩ (differential)
Input filter limit frequency typ. 1 kHz
Sensor types PT100, PT200, PT500, PT1000, Ni100, Ni120, Ni1000 resistance measurement (10 Ω…4 kΩ), KT(Y) sensors
Conversion time 10…3300 ms (adjustable, default: 270 ms)
Supply voltage electronics 24 V DC (via power contacts), ELX9560 power supply
Current consumption power

contacts

typ. 10 mA

Current consumption E-bus typ. 70 mA
Special features limit value monitoring, digital filter and characteristic curve linearisation integrated, connection method freely configurable,

TwinSAFE SC

Weight approx. 60 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/see documentation
Approvals/markings CE, UL, ATEX, IECEx, cFMus

ELX3204-0090Analog input

Error LED 4

Error LED 3

Error LED 2

Error LED 1Run LED

Power contact
+24 V EX

Power contact
0 V EX

+R1

+R2

+R3

+R4

-R1

-R2

-R3

-R4

Top view

Analog input

ELX3204-0090

BECKHOFF New Automation Technology

We reserve the right to make technical changes.

Ex marking ATEX:

II 3(1)G Ex ec [ia Ga] IIC T4 Gc
II (1)D [Ex ia Da] IIIC
I (M1) [Ex ia Ma] I
IECEx:
Ex ec [ia Ga] IIC T4 Gc
[Ex ia Da] IIIC
[Ex ia Ma] I
cFMus:
AIS Class I, II, III, Division 1, Groups A thru G
Class I, Division 2, Groups A, B, C, D
Class I, Zone 2, AEx nA [ia Ga] IIC T4 Gc
Class I, Zone 2, AEx ec [ia Ga] IIC T4 Gc
[AEx ia Da] IIIC T4

further Ex components

ELXxxxx EtherCAT Terminals with intrinsic safe in- and output
ELXxxxx-0090 EtherCAT Terminals with intrinsic safe in- and output and TwinSAFE SC
CPXxxxx Multi-touch Panel PCs and multi-touch Control Panels for use in hazardous areas, Zone 2/22

BECKHOFF New Automation Technology

We reserve the right to make technical changes.