BEA IS40P, IS40 User Manual

“The Peak Of Detection”

F2

2

3

3

:

3

:

3

1

2

3

4

5

6

7

8

9

COMBINED ACTIVE INFRARED / MICROWAVE AND ACTIVE INFRARED ONLY SENSOR

1 Description

- The IS40 uses Microwave technology
for activation and Active Infrared (IR)
technology for presence detection

- The IS40P uses Active IR technology for
presence detection only and the activation
relay can be triggered by entering or
exiting the IR fi eld

- Microwave Transceiver can be adjusted
30 degrees

- IR Presence area is 10’ x 10’ at 16’ high

- Operate on 12-24 VAC/DC +/- 10%

- Installation Height: 8’ to 16’

- Ceiling or Wall Mount

- Remote Control Accessible

2 Wiring / Setup

IS40 / IS40P

QUICK SETUP GUIDE

MICROWA VE ADJUSTMENT SCREW

MICROWAVE TRANSCEIVER

LED INDICATORS

IS40P

IS40

1 Sensor Wiring

LABEL

COLOR

POWER (VAC/DC) ACTIVATION RELAY PRESENCE RELAY

12-24 12-24 COM NO NC COM NO NC

RED BLACK WHITE GREEN YELLOW

2 Remote Control Parameters

FUNCTION

AUTOMATIC LEARN
TIME

IMMUNITY INFRARED

PATTERN INFRARED

AFFECTS

INFRARED OR

MICROWAVE

INFRARED

REMOTE

CONTROL

BUTTON

WHITE W/BLACK

STRIPE

FUNCTION DESCRIPTION

0: 30 seconds
1: 1 minute
2: 2 minutes

1: Low (Normal)

2: Medium (Rain)
3: High (Snow)

DOOR

1

6

DOOR DOOR DOOR DOOR

6

3: 5 minutes
4: 10 minutes
5: 20 minutes

DOOR DOOR DOOR DOOR

2

789

7

GREEN W/BLACK

6: 60 minutes

9: ∞(Infi nity)

3

8

STRIPE

4

9

YELLOW W/BLACK

STRIPE

5

FREQUENCY INFRARED

TARGET SIZE INFRARED

75.5376.01 EN 20080505 (75.5375) Page 1 of 2

F2

1: L - L’ Pulse Frequency

2: H - H’ Pulse Frequency
Defi ne the Minimum Size of Target

1 x 11:

5

2:

1 x 2

x 2

6

:

2 x

x 3

x 2

2 Remote Control Setup (Continued)

F1

9

0

FUNCTION

INFRARED OR

MICROWAVE

SENSITIVITY MICROWAVE

DETECTION MODE MICROWAVE

REJECTION MODE MICROWAVE

AFFECTS

ACTIVATION
RELAY
HOLD TIME

RELAY
CONFIGURATION

OUTPUT
CONFIGURATION

DOOR EXAMPLE

LAST LINE

FIRST LINE

INFRARED

MICROWAVE

INFRARED

MICROWAVE

INFRARED

MICROWAVE

REMOTE

CONTROL

BUTTON

F1

FUNCTION DESCRIPTION

0-9: (7-Default)

1: Bidirectional (Towards or Away from Sensor)

2: Unidirectional Approach (Towards Sensor)

3: Unidirectional Depart (Away from Sensor)

Height = 16 ft.

Sensitivity 9, 6, 3

1: Detection of all Kind of Targets in Motion

2: Detection of all Kind of Targets in Motion + Interference Immunity
3: Low ‘Pedestrian/Parallel traffi c’ Rejection + Interference Immunity

6 3 0 3 6

FT.

3

6

9

S = 3

12

S = 6

15

S = 9

18

4: Medium ‘Pedestrian/Parallel traffi c’ Rejection + Interference Immunity
5: High ‘Pedestrian/Parallel traffi c’ Rejection + Interference Immunity

0: 0.5 second

1: 1.0 second
2: 2.0 seconds

4: 4.0 seconds
5: 5.0 seconds
6: 6.0 seconds

7: 7.0 seconds
8: 8.0 seconds
9: 9.0 seconds

3: 3.0 seconds

Activation

Relay

1 Active Passive
2 Passive Active
3 Passive Passive

4 Active Active

Presence

Relay

Description Active Passive

Detection

No Detection

COM COM

COM COM

NO
NC

NO
NC

NO
NC

NO
NC

PRESENCE RELAY IS40 IS40P

0 - 4: ALL MODES Activates when object is in

presence zone.

Activates when object
is in presence zone.

ACTIVATION RELAY IS40 IS40P

0: STANDARD MODE Activates when motion detected. Activates when object

1: PULSE ON ENTRY Activates if object motion is

detected and then object enters
presence zone.

2: PULSE ON EXIT Activates if object motion is

detected and then object exits
presence zone.

3: PULSE ON ENTRY
FIRST / LAST LINE
(See Example to the Left)

4: PULSE ON EXIT
FIRST / LAST LINE
(See Example to the Left)

Activates if object motion is
detected and then object enters
presence zone (fi rst or last line).

Activates if object motion is
detected and then object exits
presence zone (fi rst or last line).

is in presence zone.

Activates when object
enters presence zone.

Activates when object
exits presence zone.

Activates when object
enters presence zone
(fi rst or last line).

Activates when object
exits presence zone
(fi rst or last line).

SETUP

DEFAULT VALUES

INFRARED

MICROWAVE

INFRARED

MICROWAVE

Initiate Setup, press

Set Factory Defaults, press

3 Setup Sequence

1. Power on the sensor. Sensor automatically performs a Setup on power up and Setup is complete when Red/Green fl ashing stops.

2. If the Detection Zone (Background) permanently changes and a new Setup is required, perform a new Setup by pressing
. Red & Green LEDs will blink rapidly until setup is complete.

0

0

NOTE: Avoid movement in the IR zone during setup.

3 Company Contact

Do not leave problems unresolved. If a satisfactory solution cannot be achieved after troubleshooting a problem, please
call BEA, Inc. If you must wait for the following workday to call BEA., leave the door inoperable until satisfactory repairs
can be made. Never sacrifi ce the safe operation of the automatic door or gate for an incomplete solution. The following
numbers can be called 24 hours a day, 7 days a week. For more information, visit www.beasensors.com.

Page 2 of 2 75.5376.01 EN 20080505 (75.5375)

US and Canada:

Canada:

Northeast:

1-866-249-7937
1-866-836-1863
1-866-836-1863

Southeast:

Midwest:

West:

1-800-407-4545
1-888-308-8843
1-888-419-2564