Bazooka C21 Installation Manual

C21 2 IR Emitter Output Infared Connecting Block

With IR Receiver Connection

PRODUCT INFORMATION AND INSTALLATION GUIDE

Product Overview

The C21 is a connecting block device for connecting IR receivers, IR emitters & a power supply.
The C21 may interface up to 4 A/V components depending on which emitters are selected in
the A/V system.

Product Features & Installation

1. IR Receiver Connection: Two separate connections are available for IR Receivers: Input 1:
Uses a 3.5 mm stereo jack; Input 2: Connect the IR system to the 3/position connector:
“V+ (12VDC), G (Ground) and IR (Signal)” P lease refer to the diagram below for proper con­nection.

2. Emitter Output: Select the appropriate EP11/11B Single or EP12/12B Dual emitters for
the installation. Up to 2 each of the dual emitters (EP12/12B) maximum can be connected
in parallel when using a “Y”.

3. Has one (1) IR emitter output jack, yet may be expanded to 2 outputs when using optional
“Y” Adaptor.

4. DC 12V power input receptacle with power ON green LED indicator.

5. Connect a Vista Acoustics power adaptor, a Regulated 12VDC/ 500mA output or higher to
appropriate AC outlet on the wall. Next insert the plug on the power adaptor to the jack
marked “Power DC 12V.

6. Once the LED turns green it will power all of the IR components connected in the system.

DC12V

E RE

P REWO

C

D

RT34.1

A/V RECEIVER

FM

CENTER

STEREO

TUNE

BALANCE

TREBLE

BASS

EXTRA

SPEAKERS

PHONES

VIDEO

TAPE 1

AUX

VCR

TAPE 2

LD

MONITOR

DVD PLAYER

VOLUME

TUNE

SEARCH

TUNE

MODE STORE

PRESET

MONO

CD

AM

FM

REMOTE CONTROL

1

NI

TUP

T

UPN

2

I

TTIM

V21

RI

G

V

+

V+: BLACK WITH

GREY SOLID STRIPE

G: BLACK

RS31.1

BACK VIEW FOR

CODING & DEFINITION

IR: BLACK WITH GREY

DASHED STRIPE

In North America contact:

Trends Electronics International Inc. - 100 – 980 West 1st Street. North Vancouver, B.C. V7P 3N4

Phone: [phone] Fax: [phone] Email: [e-mail]