Baumfolder 714XLT Static brush mount Manual

BAUMFOLDER

CORPORATION

Quality Bindery Equipment Since 1917

714XLT

ST A TIC BRUSH MOUNTING

1 1

1 TP10484

1 1

TP10484

© 2004
All Rights Reserved

WARNING

• Do not operate this machine without all guarding in place.

• Do not make adjustments or perform maintenance on this machine with power on.

• Keep the machine and the work area clean and free of spills to prevent accidents.

• Be sure to replace any safety decals that may have been detached for any reason.

Baumfolder reserves the right to make changes in design or to make additions or improvements in its
products without imposing any obligation upon itself to install them on its products previously
manufactured. It is recommended that modifications to this equipment not be made without the advice
and express written consent of Baumfolder.

TP10484

22

2

22

L Bracket (Qty 4)

2 Top Brush

2 Bottom Brush

M5 W asher (12 Qty)

3 Each Side Top Brush

T op Fold Roll Boxing

3 Each Side Bottom Brush

1 Each Side T op Brush

1 Each Side Bottom Brush

From Boxing and Replace with

M5 x 12 Socket Head Screw

M5 x 10 Button Head Screw

(Qty 4)

(Remove M5 Socket Head Screw

2 T op

2 Bottom

Use M4 x 12 Button Head Screw ,

Flatwasher , Lockwasher and Nut

to Mount the Brush to the Bracket

The Static Brushs Should be

Located 1.5 - 2.0 mm A way

From the Roll

Static Brush (Qty 2)

1 Top

1 Bottom

Remove Present

Nip Guard and

Replace with New

Nip Guard

3 3

3 TP10484

3 3

Bottom Fold Roll

M5 Washers

(3 Each Side)

Bottom Fold Roll Boxing

Fold Roll

1.5 - 2.0 mm Away From the

The Static Brush Should be

TP10484

44

4

44

4