bauknecht TRKK 7890 BK INSTRUCTION FOR USE

5019 407 00586

GB

TRKK 7890

Quick Reference Guide

Before using the machine, please also read the “Instructions For Use” carefully!

(Subject to technical modifications)

4

Programme selector knob

Turn the programme selector knob to the desired

programme. The indicator next to the programme

name lights up. The start indicator blinks to show,

that the dryer is in selection mode. After the

Start

button is pressed the start indicator lamp lights up

and the programme starts.

Start button

The drying programme is started by pressing this

button. The indicator lamp flashes during the

selection phase and lights up during drying.

Indicator lamps

Filter

The indicator lamp lights up when the filter and/or

heat exchanger need cleaning.

Clean the filter at the end of every cycle.

Water container

The indicator lamp lights up when the water

container needs to be emptied. The drying cycle is

automatically interrupted. Empty the container and

press the

Start

button to restart the drying

programme.

Empty the water container after every drying cycle.

Time remaining display

Depending on the programme selected, once the

drying cycle has been started, a default drying time is

displayed. The time displayed is corrected by a few

minutes depending on the volume, type and

dampness of the laundry.

The drying time specified is a calculated value

which will be updated during the drying

programme.

The flashing lines indicate that the calculation is

running. The remaining time will be updated.

Dryness adjustment

This is an option to adjust the dryness of the laundry

according to your wishes. Select the desired

programme and the option dryness level adjustment

by pressing the button “+” for more dry or the

button “-” for more humid. The selected dryness

will be stored as a pre-setting to the selected drying

programme. Using the drying programme next time

the pre-setting appears. By pressing the dryness

adjustment buttons “+” or “-” the pre-setting can

be changed.

Programme sequence

The programme sequence is indicated by lamps, switching on when

programme step starts and switching off when the programme step is

passed.

Drying Airing

End

of

cycle

Anti-

crease

Options

Gentle

Reduces drying intensity

(recommended for delicate items).

Buzzer

Signals/sounds end of drying cycle.

Anti-crease

Prevents laundry from creasing up to 12 hours.

Buzzer and Anti-crease cannot be selected

together.

Delayed Start

Delays the start of the drying cycle by 1 to 12 hours.

Each time the button is pressed, the start time is

delayed by 1 hour .

Then press the

Start

button to confirm the final

selection and to start the dryer .

The delayed start indicator lamp flashes and the

countdown counts down in 1-hour intervals. The

countdown is indicated by the indicator lamp above

the button flashing. During the countdown, the

drum will turn from time to time to re-distribute

the laundry. To cancel or change the previously set

time delay, set the index of the programme selector

knob to the top, or open the door.

Drum light

(Option only available when programme is

selected).

Push the button to turn the drum light on for

30 sec. and push again to turn the drum light off.

{

1

Machine operation

Additional information (including troubleshooting and service) can be found in the individual chapters of the

“Instructions For Use”.

Sort by:

Material thickness:

Whenever there is greater load than the dryer can handle, separate

the laundry according to weight (e.g. dry towels and thin underwear separately).

Type of material:

Cotton (linen); synthetic textiles (easy care).

Degree of drying:

Cupboard dry, iron dry etc.

Do not tumble dry

: Woollens, silk, nylon stockings, delicate embroidery, fabrics

with metallic decorations, bulky items such as sleeping bags, etc.

Check that all fastenings are closed and that pockets are empty. Please ensure that

there are no cigarette lighters in the wash. Turn the laundry inside out.

Pull the door handle. If the child safety lock is activated, please deactivate it

(additional information can be found in the “Door Reversibility/Child Safety Lock”

chapter of the “Instructions For Use”).

Place the laundry loosely in the drum to achieve equal drying throughout.

Then close the door.

Select the drying programme required by turning the programme selector knob.

The

Start

indicator lamp is blinking, indicating that the cycle needs to be started

(for information, refer to programme table).

Select the option required by pressing the corresponding button.

The indicator lamp above the relevant button lights up to confirm your selection.

An alarm sounds if an incorrect selection is made (incompatible options).

Press the button again to cancel the option.

The drying programme is started by pressing the

Start

button.

The relevant indicator lamp lights up.

Changing programme selection:

If the programme selected is changed during

drying, the dryer stops. The

Start

indicator lamp flashes. To operate the new

programme, again press the

Start

button.

Interrupting programme:

To interrupt the dryer during the drying cycle, set the

programme selector knob to “Airing” and press the

Start

button.

Wait at least 5 minutes before opening the door to allow the dryer to cool down.

For your safety the drying cycle stops automatically if you open the door.

To restart, after door opening, close the door and press the

Start

button again.

End:

Take the laundry out of the dryer. The drying process is

complete and the anti-crease phase has been reached (active).

Anti Crease:

If the laundry is not removed at the end of the drying

cycle, an automatic anti-crease cycle will operate for maximum 60

min. The drum rotates at regular intervals to prevent the laundry

from creasing.

Set the index of the programme selector knob to the top, all lights go off.

Cleaning the lint filter:

Open the door, pull the lint filter up and out of the

machine and open it. Brush the lint using a soft brush or your fingertips. Close the

lint filter and push firmly back into place.

Emptying the water container:

Pull the container out by the handle and empty.

Replace the container when empty by pushing it completely back into place.

If required, activate the child safety lock (additional information can be found in the

“Door Reversibility/Child Safety Lock” chapter of the “Instructions For Use”).

Please note:

Only use additives/plastic items specified as dryer safe and rinse items that have been treated with stain remover

thoroughly in plenty of water before drying. Never dry rubber objects or objects stained with vegetable oils in the dryer.

Sort the laundry according to

care symbols:

Do not tumble dry

Suitable for tumble drying -

Suitable for tumble drying

at low drying temperature

Preparing the laundry

Opening the door

Loading the dryer

and closing the door

Switching on the machine

and selecting the programme

Selecting the options

(if available)

Starting the dryer

Programme end -

unloading the dryer

Switching the dryer off