bauknecht TRKK 7870 BK INSTRUCTION FOR USE

Before using the machine, please also read the “Instructions For Use” carefully!
TRKK 7870
Programme selector knob
Start button
The drying programme is started by pressing this button. The indicator lamp flashes during the selection phase and lights up during drying.
Indicator lamps
Filter
The indicator lamp lights up when the filter and/or heat exchanger need cleaning.
Clean the filter at the end of every cycle.
Water container
The indicator lamp lights up when the water container needs to be emptied. The drying cycle is automatically interrupted. Empty the container and press the
Start
programme.
Empty the water container after every drying cycle.
Time remaining display
Depending on the programme selected, once the drying cycle has been started, a default drying time is displayed. The time displayed is corrected by a few minutes depending on the volume, type and dampness of the laundry.
The drying time specified is a calculated value which will be updated during the drying programme.
Quick Reference Guide
Programme sequence
The programme sequence is indicated by lamps, switching on when programme step starts and switching off when the programme step is passed.
Start
Options
button to restart the drying
GB
End
Drying Airing
Gentle
Reduces drying intensity (recommended for delicate items).
Anti-crease
Prevents laundry from creasing up to 12 hours. Buzzer and Anti-crease cannot be selected together.
Delayed Start
Delays the start of the drying cycle by 1 to 12 hours. Each time the button is pressed, the start time is delayed by 1 hour . Then press the selection and to start the dryer . The delayed start indicator lamp flashes and the countdown counts down in 1-hour intervals. The countdown is indicated by the indicator lamp above the button flashing. During the countdown, the drum will turn from time to time to re-distribute the laundry. To cancel or change the previously set time delay, set the index of the programme selector knob to the top, or open the door.
{
button to confirm the final
Start
of
cycle
Anti-
crease
The flashing lines indicate that the calculation is running. The remaining time will be updated.
Dryness adjustment
This is an option to adjust the dryness of the laundry according to your wishes. Select the desired programme and the option dryness level adjustment by pressing the button “+” for more dry or the button “-” for more humid. The selected dryness will be stored as a pre-setting to the selected drying programme. Using the drying programme next time the pre-setting appears. By pressing the dryness adjustment buttons “+” or “-” the pre-setting can be changed.
5019 407 00585
(Subject to technical modifications)
4
Machine operation
Additional information (including troubleshooting and service) can be found in the individual chapters of the “Instructions For Use”.
Sort the laundry according to
care symbols:
Do not tumble dry Suitable for tumble drying -
at low drying temperature Suitable for tumble drying
Preparing the laundry
Opening the door
Loading the dryer
and closing the door
Switching on the machine
and selecting the programme
Selecting the options
(if available)
Starting the dryer
Programme end -
unloading the dryer
Sort by:
Material thickness:
the laundry according to weight (e.g. dry towels and thin underwear separately).
Type of material: Degree of drying: Do not tumble dry
with metallic decorations, bulky items such as sleeping bags, etc.
Check that all fastenings are closed and that pockets are empty. Please ensure that there are no cigarette lighters in the wash. Turn the laundry inside out.
Pull the door handle. If the child safety lock is activated, please deactivate it (additional information can be found in the “Door Reversibility/Child Safety Lock” chapter of the “Instructions For Use”).
Place the laundry loosely in the drum to achieve equal drying throughout. Then close the door.
Select the drying programme required by turning the programme selector knob. The (for information, refer to programme table).
Select the option required by pressing the corresponding button. The indicator lamp above the relevant button lights up to confirm your selection. An alarm sounds if an incorrect selection is made (incompatible options). Press the button again to cancel the option.
The drying programme is started by pressing the The relevant indicator lamp lights up.
Changing programme selection:
drying, the dryer stops. The programme, again press the
Interrupting programme:
programme selector knob to “Airing” and press the Wait at least 5 minutes before opening the door to allow the dryer to cool down. For your safety the drying cycle stops automatically if you open the door. To restart, after door opening, close the door and press the
indicator lamp is blinking, indicating that the cycle needs to be started
Start
Whenever there is greater load than the dryer can handle, separate
Cotton (linen); synthetic textiles (easy care).
Cupboard dry, iron dry etc.
: Woollens, silk, nylon stockings, delicate embroidery, fabrics
button.
Start
If the programme selected is changed during
indicator lamp flashes. To operate the new
Start
button.
Start
To interrupt the dryer during the drying cycle, set the
Start
Take the laundry out of the dryer. The drying process is
End:
complete and the anti-crease phase has been reached (active).
Anti Crease:
cycle, an automatic anti-crease cycle will operate for maximum 60 min. The drum rotates at regular intervals to prevent the laundry from creasing.
If the laundry is not removed at the end of the drying
button.
Start
button again.
Set the index of the programme selector knob to the top, all lights go off.
Cleaning the lint filter:
machine and open it. Brush the lint using a soft brush or your fingertips. Close the
Switching the dryer off
Please note:
thoroughly in plenty of water before drying. Never dry rubber objects or objects stained with vegetable oils in the dryer.
Only use additives/plastic items specified as dryer safe and rinse items that have been treated with stain remover
lint filter and push firmly back into place.
Emptying the water container:
Replace the container when empty by pushing it completely back into place. If required, activate the child safety lock (additional information can be found in the
“Door Reversibility/Child Safety Lock” chapter of the “Instructions For Use”).
Open the door, pull the lint filter up and out of the
Pull the container out by the handle and empty.
1
Loading...
+ 2 hidden pages