BAUKNECHT HVP2 NN5F IN Daily Reference Guide

Quick guide

EN

THANK YOU FOR BUYING A BAUKNECHT PRODUCT

In order to receive a more complete assistance, please
register your product on www . bauknecht . eu / register

PRODUCT DESCRIPTION

1

2

3

4

5

Before using the appliance carefully read the Safety
Instruction.

1. Control panel

2. Fan

3. Circular heating element

6

7

8

(non-visible)

4. Shelf guides

(the level is indicated on the front
of the oven)

5. Door

6. Upper heating element/grill

7. Lamp

8. Identification plate

(do not remove)

9

9. Bottom heating element

(non-visible)

CONTROL PANEL

1 2 CA B D 3

OVEN CONTROLS

1. SELECTION KNOB

For switching the oven on by selecting a function.
Turn to the

2. THERMOSTAT KNOB

Turn to select the temperature you require.

3. LED THERMOSTAT / PREHEATING

Switches on during the heating process. Switches off
once the desired temperature is reached.

position to switch the oven off.

COOKTOP CONTROLS

A. for front left hotplate.
B. for rear left hotplate.
C. for rear right hotplate.
D. for front right hotplate.

1

ACCESSORIES

WIRE SHELF BAKING TRAY

The number and the type of accessories may vary depending on which model is purchased.
Other accessories that are not supplied can be purchased separately from the After-sales Service.

WWW

Download the Use and Care Guide from

docs . bauknecht . eu for more information

INSERTING THE WIRE SHELF
AND OTHER ACCESSORIES

Insert the wire shelf horizontally by sliding it across
the shelf guides, making sure that the side with the
raised edge is facing upwards.

Other accessories, such as the baking tray, are
inserted horizontally in the same way as the wire
shelf.

FUNCTIONS

OFF

For switching off the oven.

LIGHT

To switch the oven light on/off.

CONVENTIONAL

For cooking any kind of dish on one shelf.

CONVECTION BAKE

For cooking meat and pies with liquid filling
(savoury or sweet) on a single shelf, and pizzas on
one or two shelves. This function delivers an even,
golden, crisp top and base. When cooking on two
levels, switch the position of the dishes halfway
through cooking to cook food more evenly.

REMOVING AND REFITTING THE SHELF GUIDES

• To remove the shelf guides, remove the fixing screws
(if present) on both sides with the aid of a coin of a
tool. Lift the guides up and pull the lower parts out of
their seatings: The shelf guides can now be removed.

• To refit the shelf guides, first fit them back into their
upper seating. Keeping them held up, slide them
into the cooking compartment, then lower them into
position in the lower seating. Refit the fixing screws.

WWW

Download the Use and Care Guide from

docs . bauknecht . eu for more information

TURBO GRILL

For roasting large joints of meat (legs, roast
beef, chicken). We recommend using a drip tray to
collect the cooking juices: Position the pan on any
of the levels below the wire shelf and add 500 ml of
drinking water. The turnspit (if provided) can be used
with this function.

DEFROSTING

To speed up defrosting of food.

GRILL

For grilling steaks, kebabs and sausages,
cooking vegetables au gratin or toasting bread.
When grilling meat, we recommend using a drip tray
to collect the cooking juices: Position the pan on any
of the levels below the wire shelf and add 500 ml of
drinking water.

2

USING THE APPLIANCE FOR THE FIRST TIME

EN

A new oven may release odours that have been left
behind during manufacturing: this is completely
normal.
Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.
Remove any protective cardboard or transparent film
from the oven and remove any accessories from inside
it.

DAI LY USE

1. SELECT A FUNCTION

To select a function, turn the selection knob to the
symbol for the function you require.

2. ACTIVATE A FUNCTION

To start the function you have selected, turn the
thermostat knob to set the temperature you require.

To interrupt the function at any time, switch off the
oven, turn the selection knob and the thermostat knob

and .

to

3. PREHE ATING

Once the function has been activated, the LED
thermostat will switch on signalling that the
preheating process has begun.
At the end of this process, the LED thermostat
switches off indicating that the oven has reached the
set temperature: at this point, place the food inside
and proceed with cooking.

Please note: Placing the food in the oven before preheating
has finished may have an adverse effect on the final cooking
result.

• COOKTOP OPERATION

(see the instructions supplied with the cooktop).

Turn the control knob of the relevant hotplate
clockwise to the desired power setting.

The oven control panel features 4 adjustable knobs
for cooktop operation. The cooktop control knobs
are marked with a numerical scale corresponding
to different power settings, and a series of function
symbols.

Heat the oven to 250 °C for about one hour,
preferably using the “Convection Bake” function.
The oven must be empty during this time.
Follow the instructions for setting the function
correctly.

Please note: It is advisable to air the room after using the
appliance for the first time.

HEAT MAINTENANCE

To maintain a constant temperature of 60° until
the end of cooking. To select this function, turn the
knob to

FAST BOIL

This function is used to bring water to the
boil rapidly and remains on for a preset time. At the
end of the preset time, the cooktop automatically
returns to the maximum power setting. This function
can be selected even during cooking. Important:
before selecting this function, make sure the pot
is positioned on the selected hotplate in order
to avoid any damage to the cooktop surface. The
stated performance values for this function are those
guaranteed for all glass ceramic cooktops. For this
function, place the pot on the selected hotplate and
turn the knob to
of the knob.

MULTIZONE

This is available on the front left and rear
left hotplates. This extends the heating area of the
cooktop in order to allow the use of large, oval or
rectangular pots or cooking receptacles. To select
this function: turn the knob to
the residual heat indicator for the hotplate begins
to flash. To switch on the triple zone function (if
available), wait until the LED begins flashing quickly.
Select the power setting required by turning the knob
anticlockwise. The residual heat indicator remains on
to indicate that the cooktop is in use. To deselect, turn
the knob to

Please note: The multizone function can only be switched on
for the double and triple hotplates of the cooktop.

.

. To deselect, change the position

and wait until

by turning the knob anticlockwise.

GENTLE HEAT

To allow dough to rise, to soften butter taken
from the fridge, to keep baby bottles or food warm,
also for making yoghurt, melting chocolate, etc.
This function is only available when the residual
heat indicator is on. For this function, make sure
the residual heat indicator of the desired hotplate is
on. Turn the knob to
change the position of the knob.

. To deselect the function,

3